Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers and loop hangers. All have a threaded hole on top for mounting with threaded rod.

Copper-coated iron hangers are corrosion resistant and can be used with copper tubing.

For technical drawings and 3-D models, click on a part number.

Mount these hangers on top of one another to organize multiple lines of pipe, tubing, and conduit at any angle. They include clamping screws, which tighten around material and provide a more secure hold than loop hangers. Mount with threaded rod or the included fastener.

End clamps are flat on one side and round on the other. The flat side has a mounting hole that can be used with 1/4"-20 threaded rod to mount or a 10-24 fastener to connect to the top of a stacking clamp. The round side provides a finished look.

Stacking clamps are flat on top and bottom. The bottom has a mounting hole that can be used with 1/4"-20 threaded rod to mount or a 10-24 fastener to connect to the top of a stacking clamp. The top has a stacking hole that can be used with 10-24 threaded rod to mount or a 10-24 connecting fastener to connect to the bottom of another clamp.

For technical drawings and 3-D models, click on a part number.

Secure two pressurized hydraulic lines with a single clamp to lessen vibration in hydraulic systems. Weld the bottom plate onto the mounting surface for a more secure connection than rail- and adhesive-mount clamps. To install, weld the bottom plate onto the mounting surface.

Zinc-plated steel and zinc-phosphate-coated steel plates have good corrosion resistance. 304 stainless steel plates have excellent corrosion resistance.

Stacking clamps allow you to route multiple lines on top of each other. They include fasteners and a plate for attaching to regular clamps or other stacking clamps. Stacking clamps cannot be used alone.

For technical drawings and 3-D models, click on a part number.