Made of silicone, these grips withstand temperatures up to 400° F.

Add or replace worn grips on round and irregularly shaped handles on hammers, axes, and other hand tools. These grips have a removable spiral-wound core. Slide them on a handle and use the tab to pull out the core. The grips contract and conform to your handle as the core is removed. Made of EPDM foam, they insulate and cushion vibration.

These grips are grooved to conform to your fingers for a comfortable, secure grasp. Slide them onto a round tool handle and use the eye to hang them. All are made of vinyl for strength and durability.

Cut these grips to your desired length. All have two open ends to position them anywhere along a handle.

Made of silicone, these grips withstand temperatures up to 400° F. They are grooved to conform to your fingers for a comfortable, secure grasp.

Commonly used on toggle clamps, these grips have a flanged base to protect fingers and keep hands from slipping.

Made of vinyl foam, these grips insulate and cushion vibration.

Snap these onto wire pail and bucket handles for a more comfortable and secure grip.

Thicker than standard wrap-on grips, these cushioned grips are made of EPDM foam to insulate and cushion vibration.

Add or replace worn grips on a variety of irregularly shaped handles and objects. Cut these grips to your desired length with scissors and slide them on your object. Use a heat gun to shrink them tightly in place.

These handles are often used as grips on hand wheels or cranks to operate machinery around food processing lines without the risk of contaminating the food. Install them on a threaded stud.

An easy-to-grip ball knob makes these handles a good replacement for gear levers. Use them to operate machinery.

Press fit one of these handles into a shaft, rod, or hand wheel to operate machinery.

Also known as quill-feed handles, these handles engage and disengage with a flick of the wrist to speed machining operations—especially when drilling deep holes.

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

For fast clamping anywhere along a threaded rod, press the button to slide the handle into position; release the button to secure. These handles are also known as clamping handles.

Prevent unintentional changes to equipment settings—when not in use, these handles are disengaged and turn freely. To change the position, push down on the handle and turn. When you release the handle, it disengages once again. These handles are also known as clamping handles.

Choose these handles when vertical space is limited. Also known as clamping handles, use them for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely. Release it to engage and tighten.

Made of stainless steel with a nitrile mounting seal, these handles are suitable for food-processing applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

With a minimum surface resistance of 10,000 ohms, these handles reduce static electricity that can damage electronic equipment. Also known as clamping handles, use them for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

Long straps allow you to carry bundles of boxes, lumber, pipe, and other objects that weigh up to 85 lbs.

Use these handles to keep holes aligned or lift several sheets of thin material. They have a plug that expands to grip the edges inside holes. They are not suitable for permanent installation—use only for temporary mounting.

Also known as double cams, these complete cam handles have a durable, extra-large handle for clamping on fixture bases, plates, and workpieces. For fast adjustments, push down on the handle and the head applies pressure to quickly draw two parts together.

Whether you're looking for a stopgap or permanent replacement, these valve handles adjust to fit a range of valve and faucet stem widths.

Also known as stove handles, these wire coil handles dissipate heat.

With adhesive at both ends, these plastic strips stick to boxes, bags, and other objects to create a carrying handle.

Identify equipment controls and components at a glance by their color. Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Cut the grip to the length you need before mounting. Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Open and close a variety of doors and drawers on machines and equipment next to food processing lines while reducing the risk of contaminating the food. Thread screws through holes from the back of your surface into the handles to install them.

These handles provide a stronger connection than those attached with screws or nuts. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. The grip is offset from the mounting surface so there's room to fully grasp the handle.

These handles have a folding grip that drops out of the way when you let go. Insert studs into holes in your surface and secure from the backside to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. When not in use, the grip folds out of the way.

Thread screws through holes from the back of your surface into the handles to install. These handles fit into a cutout, so they are flush with the mounting surface. Their grip drops out of the way when you let go. Use them to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

When not in use, the spring in these handles keeps the folding grip flush with the mounting plate and prevents rattling. Fasten the handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Their grip folds out of the way when it's not in use.

Designed to snap into a cutout, these handles are flush with the mounting surface. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. They fit into a cutout, so they are flush with the mounting surface.

Thread screws through holes from the back of your surface into the handle to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. These handles fit into a cutout, so they’re flush with the mounting surface.

Fasten these knobs directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Thread a screw through a hole from the back of your surface into the knobs to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Mount these knobs in a cutout to keep them out of the way when not in use. Push the grip to extend, and push it again to recess. Use these knobs to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Mill specific holes or keyways in the hub to meet your specifications or weld in place. Often used on cross-slide tables, these crank handles provide leverage to maximize force for turning and tightening.

Round long shafts can pass through these handles for mounting versatility. Create custom threads or drill a hole in the side of the hub to secure with a set screw. Often used on cross-slide tables, these crank handles provide leverage to maximize force for turning and tightening.

Use these crank handles for applications that involve frequent machinery adjustments. They provide leverage to maximize force for turning and tightening.

Primarily used on spigot valves, slide these knobs over valves with a square stem and secure them in place with your fastener.

A rubber coating provides a comfortable grip.

The L shape provides clearance when reaching over obstructions.

The ratcheting mechanism turns sockets quickly.

Bend around obstructions to turn hard-to-reach fasteners.

A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench.

The head is offset 45° to provide clearance for reaching over obstructions.

Also known as monkey and auto wrenches, these grip large fasteners and other flat objects.

There's no adjustment nut or button on these wrenches—a spring-loaded hinge automatically closes the top jaw around pipe.

Open and close the jaws with one hand. Press the lever and slide the bottom jaw to the desired position; tension keeps it in place.

Insert into a pipe or fitting and turn—the wrench grips the walls for easy installation and removal without marring the outside of the pipe.

Durable and impact resistant, these handles won't split like wood can. Match the handle to the head opening size and shape of your tool.

Drive these wedges into the handle of your hammer or axe to create a snug fit for the head.

A long handle gives you the leverage to quickly bend metal.

Use the T-handle to turn these reamers by hand.

An extra-long ratcheting handle gives you leverage to smooth rough ends of pipe and conduit quicker than standard hand reamers.

Handles are made of wood.