What you need for most maintenance jobs, these sets include an assortment of drivers, cutters, pliers, and wrenches.

Made of materials that are Factory Mutual approved, these tools inhibit sparking and are nonmagnetic and corrosion resistant.

Suitable for occasional maintenance work, these sets are imported.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Pivot the head to access fasteners from an angle.

With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.

Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts.

The short bit on these sockets fits in spaces where height clearance is limited.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Lock your socket into the extension to prevent accidental disengagement..

Lock your socket into the extension to prevent accidental disengagement.

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

These sockets are made to withstand the high torque and force of impact tools.

Convert from one square drive size to another.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

These wrenches are made of stainless steel for excellent corrosion resistance.

When working in tight spaces, these short wrenches fit where others can't.

Suitable for occasional maintenance work, these sets are imported.

A spline-shaped box end turns spline, hex, and 12-point fasteners. This shape also gets a better grip on rounded fasteners that can be difficult to turn with a traditional wrench.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Pivot the box end for access to fasteners in tight spots.

Made of stainless steel, these wrenches have excellent corrosion resistance.

The slim heads fit into tight spaces and around thin fasteners.

One head is angled 75° for access to hard-to-reach fasteners. These are also known as ignition wrenches.

Sized for working on small equipment, these wrenches are 4 1/8" long with a slim head and handle.

The handles are covered in plastic for a comfortable grip.

The heads are offset to provide clearance for reaching over obstructions.

The heads are offset 45° to provide clearance for reaching over obstructions.

Sets include various sizes of wrenches that are shaped to fit round holes on the circumference of collars, bearings, and other machine tool components.

A scaled-down version of standard screwdrivers, these tools are shorter, slimmer, and easy to take with you.

Sets include an assortment of drivers with soft, contoured handles that provide comfort and the best possible grip for achieving maximum torque.

These assorted drivers have bright-colored handles to stand out so they're less likely to be misplaced.

The assorted drivers in these sets have a shaft that extends through the handle and a steel end cap, which provide the strength to absorb hammer blows.

Sets include an assortment of drivers with a ring that can be secured with a lanyard to prevent drops. The ring rotates around the shaft so the driver turns freely.

The assorted drivers in these sets have a ball end that allows angled entry to turn screws in hard-to-reach areas.

Sets include assorted drivers with an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC, EN, or ASTM standards.

These assorted screwdrivers are made of beryllium copper that is FM approved. They help meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Press down on the handle’s collar to either adjust the shaft length or remove the shaft and replace it for a different tip. Sets include a handle and multiple reversible shafts.

The ball-end tip allows angled entry to turn screws in hard-to-reach areas. These tools are a scaled-down version of standard changeable-shaft screwdrivers, They're shorter, slimmer, and easy to take with you. Remove and replace the shaft to change the tip size.

Sets include an assortment of drivers with a tip that can be replaced when it becomes worn. Press the rotating end cap on the handle with your palm to apply constant pressure to small fasteners while turning the body of the screwdriver with your fingertips.

A magnetized tip holds the screw in place. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

The handle on these assorted ESD-safe screwdrivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside.

Also known as steering wheel and flywheel pullers, you can change the bolt configuration on these pullers to fit a variety of tapered hole patterns.

Remove press-fit hubs and fan blades in a variety of sizes. Sets include a hub adapter and long jaws so you can grip large components.

Sets include three pry bars with a plastic handle for a comfortable grip.

Impact-resistant steel makes these punches stronger and more durable than standard pin-removal punches.

Use these sets to knock out pins and rivets that have already been loosened.

The pliers in these sets have a forged construction, which provides high strength for durability and long life.

The forged construction provides high strength for durability and long life. Use the included hex key to change tips for a different size or angle.

The extractors in these sets provide the tightest fit and the most contact with the part to be removed but also cause the most expansion.

With a short and stocky design, the extractors in these sets provide a strong grip without needing to drill a deep hole. After drilling, insert the extractor and turn.

Insert the extractors in these sets into a pipe or fitting and turn with a wrench—the knurls will grip the part so you can twist it out.

Use these sets to extract socket head cap screws that have damaged or rounded recesses without drilling.

These sets have a variety of extractors to remove button-head socket cap screws that have damaged or rounded recesses without drilling.

These brass tools reduce marring on metal surfaces because they're softer than steel punches.