Connection Type Connection Type |
|---|
|
Material Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Carabiner Material Carabiner Material |
|---|
|
Tool Attachment Type Tool Attachment Type |
|---|
|
For Maximum Tool Diameter For Maximum Tool Diameter |
|---|
|
|
|
Tool Lanyards
Keep your equipment close and prevent accidental drops.
| For No. of Tools | Connection Type | Capacity, lbs. | Lg. | Material | Construction | For Min. Tool Opening | Carabiner Material | Specifications Met | Each | |
| 1 | Carabiner × Elastic Loop | 10 | 35" | Nylon | Webbing | 3/8" | Aluminum | __ | 0000000 | 00000 |
| 1 | Carabiner × Elastic Loop | 15 | 33" | Nylon | Webbing | 1/4" | Aluminum | ANSI/ISEA 121 | 0000000 | 00000 |
| 1 | Carabiner × Detachable Elastic Loop | 5 | 38" | Nylon | Webbing | 3/8" | Aluminum | __ | 0000000 | 00000 |
| 1 | Carabiner × Carabiner | 10 | 35" | Nylon | Webbing | 1/4" | Aluminum | __ | 0000000 | 00000 |
| 2 | Carabiner × Carabiner × Carabiner | 15 | 35" | Nylon | Webbing | 1/4" | Stainless Steel | __ | 0000000 | 00000 |
| Replacement Detachable Elastic Loop | 0000000 | Each | 00000 |
Tool-Holding Heat-Shrink Attachments
Also known as tether loops, these have a heat-shrink sleeve for gripping your tool and a D-ring for attaching to a tool lanyard (not included). Slip the sleeve over your tool and apply heat with a heat gun until the sleeve grips tightly. To ensure the loop won’t slip off, the ends of the tool must be wider than where the loop will rest.
| For Tool Dia. | ID Before Shrinking | Sleeve Lg. | Ring Inside Wd. | Ring Inside Lg. | Capacity | Each | |
| 0.25"-0.5" | 0.75" | 1 3/4" | 0.56" | 0.47" | 4 lbs. | 0000000 | 00000 |
| 0.36"-0.75" | 1.1" | 1 3/4" | 0.56" | 0.47" | 5 lbs. | 0000000 | 0000 |
| 0.55"-1.25" | 1.5" | 2" | 1.02" | 0.86" | 10 lbs. | 0000000 | 0000 |
| 0.75"-1.75" | 2" | 2" | 1.02" | 0.86" | 15 lbs. | 0000000 | 00000 |
| 0.75"-1.75" | 2" | 4" | 1.56" | 1.05" | 25 lbs. | 0000000 | 00000 |
| 1.5"-2.5" | 2.75" | 2" | 1.56" | 1.05" | 20 lbs. | 0000000 | 00000 |
| 1.5"-2.5" | 2.75" | 4" | 1.56" | 1.05" | 25 lbs. | 0000000 | 00000 |
| 2.25"-3.5" | 4" | 4" | 1.56" | 1.05" | 25 lbs. | 0000000 | 00000 |
Tool-Holding Rings
Add attachment points to your tools. Slide the ring on and secure it in place with included rubber collar. It rotates so you can turn your tool freely. Use with Tool Lanyards (not included).
| For Tool Dia. | Ring ID | Capacity, lbs. | Each | |
| 0.035"-0.094" | 0.14" | 2 | 0000000 | 00000 |
| 0.094"-0.156" | 0.21" | 2 | 0000000 | 0000 |
| 0.156"-0.250" | 0.27" | 2 | 0000000 | 0000 |
| 0.219"-0.313" | 0.35" | 2 | 0000000 | 0000 |
| 0.313"-0.438" | 0.61" | 2 | 0000000 | 00000 |
| 0.400"-0.540" | 0.61" | 2 | 0000000 | 00000 |
| 0.540"-0.790" | 0.85" | 2 | 0000000 | 00000 |
| 0.790"-1.000" | 1.1" | 2 | 0000000 | 00000 |
| Tool Lanyard | 0000000 | Each | 000000 |
Hard-Hat Lanyards
Attach to your hard hat to prevent accidental drops.
| Lg. | Material | Construction | Connection Type | Each | |
| 23 1/4" | Polyester/Rubber | Webbing | Elastic Strap with Cinching Buckle × Cinching Buckle | 0000000 | 00000 |
Bolt-Mount Retractors
Reel with Clamp
Tool Attachment
with Split Ring
Tool Attachment
Bracket Tool
Attachment
Hang a tool or object overhead, pulling it down when you need it. Let go and the cable pulls it back up. Choose a load capacity that is sufficient for the total load you'll place on the retractor. This includes the tool plus any fittings, hose, or power cords.
For technical drawings and 3-D models, click on a part number.
Capacity, lbs. | Cable | Housing | Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min. | Max. | Travel, ft. | Dia. | Material | Ht. When Retracted | Wd. | Dia. | Dp. | Material | Overall Wd. | Mounting Fasteners Included | No. of | Dia. | For Screw Size | Each | |
Enclosed Reel | ||||||||||||||||
Clamp Tool Attachment | ||||||||||||||||
| 0.5 | 0.6 | 2 | 1/8" | Stainless Steel | 3 1/2" | 2" | 2" | 1/2" | Steel | 2" | No | 2 | 3/16" | No. 8 | 000000 | 000000 |
| 0.5 | 0.6 | 4 | 1/32" | Stainless Steel | 3 1/4" | 2" | 2" | 1/2" | Steel | 2" | No | 2 | 3/16" | No. 8 | 0000000 | 00000 |
Split Ring Tool Attachment | ||||||||||||||||
| 0.5 | 0.6 | 2 | 1/8" | Stainless Steel | 3 1/2" | 2" | 2" | 1/2" | Steel | 2" | No | 2 | 3/16" | No. 8 | 000000 | 00000 |
| 0.5 | 0.6 | 4 | 1/32" | Stainless Steel | 3 1/4" | 2" | 2" | 1/2" | Steel | 2" | No | 2 | 3/16" | No. 8 | 0000000 | 00000 |
Bracket Tool Attachment | ||||||||||||||||
| 0.5 | 0.6 | 4 | 1/32" | Stainless Steel | 2 1/2" | 2" | 2" | 1/2" | Steel | 2" | No | 2 | 3/16" | No. 8 | 0000000 | 00000 |