Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.

No need to pull the socket off the tool—push a button to release.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

Measure with an accuracy of ±2%.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Measure with an accuracy of ±7%.

Apply more torque than your wrench can deliver on its own. Use a multiplier with a torque wrench to ensure you do not exceed the maximum input torque.

Set a desired torque within the range.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

Set the desired torque and the driver indicates when it's reached.

Also known as ESD-safe screwdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. When set torque is reached, these drivers slip to disengage and prevent overtightening.

Set includes a handle and six shafts. Remove and replace the shaft to use a different size or drive style.

Also known as impact-free torque screwdrivers, these tools minimize reaction force when the set torque is reached. They reduce user fatigue when installing many fasteners in a short period of time.

Turn the handle like a standard torque driver and the 90° offset head reaches fasteners in tight spots. Factory-set screwdrivers ensure you reach the same torque every time.

Set torque and the clutch slips to prevent you from exceeding it.

A dial shows how torque measurements change as you turn the driver. Use these tools to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.

Attach a socket to the 1/4" square drive tip. These tools have a dial that shows how torque measurements change as you turn the driver. Use to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.

An angled handle makes it easier to drive and remove fasteners in tight spaces. Connect these tools to your shop air.

Connect these tools to your shop air to install and remove fasteners.

Place your tool and the included square drive connector on the tester and turn.

Measure the torque output of torque wrenches, screwdrivers, and other hand tools to ensure they deliver the right amount of torque—and check your results on a digital screen.

Calibrate torque screwdrivers, both hand and non-impact electric styles, on your production line and put an end to fasteners loosening or failing from under or over tightening.

Keep torque-limiting power tools, such as air-powered tools and impact drivers, calibrated and prevent fasteners from loosening or failing because of under or over tightening.