Unlike most torque wrenches, you don’t have to set torque to the lowest value on the scale after use. This wrench indicates when your set torque is reached with an audible click and an impulse in the grip. It's also known as a split-beam torque wrench. Wrench comes with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Breaker bar handle (sold separately) attaches to the head of your torque wrench to break stuck fasteners free without risking damage to the wrench. It extends for additional length.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900. Set torque and the wrench indicates when it's reached with an audible click and an impulse in the grip. To relieve pressure on the spring and maintain calibration, set torque to the lowest reading on the scale when not in use.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

Calibration certificate with test data traceable to UKAS includes the test measurements that confirm accuracy.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Set the desired torque and the wrench indicates when it's reached with an audible click. To relieve pressure on the spring and maintain calibration, set torque to the lowest reading on the scale when not in use.

Note: Accuracy ratings apply to the entire torque range.

Warning: Do not use these tools in direct contact with acetylene.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening. Factory-set wrenches ensure the same torque is reached every time. The torque setting cannot be adjusted. Wrenches come with a calibration certificate traceable to NIST that states the product has passed a test for accuracy.

Reach the same torque every time with factory-set wrenches that indicate with an audible click and an impulse in the grip when set torque is reached. Wrenches come with a calibration certificate traceable to NIST that states the product has passed a test for accuracy.

Change the torque of these wrenches with adjustment keys (sold separately).

Trust the precision of your measurements—these wrenches are accurate to ±1%. They display torque as it’s measured and the maximum torque reached. Use to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. To fasten to a specific value, set the desired torque—lights and an audible alarm indicate when target has been reached or exceeded. The display rotates so you can read it at any angle. Wrenches come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Measure with an accuracy of ±2%. These wrenches display torque as it’s measured and the maximum torque reached. Use to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. To fasten to a specific value, set the desired torque—lights and an audible alarm indicate when target has been reached or exceeded. Wrenches come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

These wrenches have an accuracy of ±3.5%. The display shows torque as it's measured and maximum torque reached. Use to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. To fasten to a specific value, set the desired torque—lights and an audible alarm indicate when target has been reached or exceeded. Wrenches come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements. Stored data can be downloaded to a PC using the included USB cable—no separate software is required. The digital display shows how torque measurements change as you turn the wrench. Use these tools to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. Wrenches have programmable, lockable presets that allow you to set up different torque settings in sequence to ensure correct, reliable operation. Lights, an audible alarm, and a vibration in the handle indicate when target has been reached or exceeded. Tools come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Note: Accuracy ratings apply to the entire torque range.

A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached. Use these wrenches to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. They come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

Trust the precision of your measurements—these wrenches are accurate to ±2%. The scale has a main pointer that shows torque as it’s being applied and a memory pointer that indicates the maximum torque reached. Use to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. Wrenches come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

Measure with an accuracy of ±7%. The scale's pointer moves to show torque as it's applied. Use these wrenches to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. They are also known as beam torque wrenches.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque or and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Note: The accuracy ratings do not apply to the lower 10% of the torque range.

To set torque, remove the snap ring and locking plate and adjust the nut. When the torque setting is reached, the adapter clicks and releases. These tools let you to accurately measure or limit the torque you apply to prevent overtightening and damaging fasteners.

When the torque setting is reached, these adapters click and release. They are set to a specific torque and cannot be adjusted. Adapters let you accurately measure or limit the torque you apply to prevent overtightening and damaging fasteners.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached. They are made to withstand the high torque and force of impact tools.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached. They are made to withstand the high torque and force of impact tools.

Change heads to use these tools as an open-end, box, square drive, or hex-key wrench. When the set torque is reached, these wrenches indicate with an audible click and a momentary release. To reverse torque-limiting direction, remove head, turn handle over, and reattach head. The handle and head combination you choose may have different maximum torque values. Do not exceed the lower value.

Ratcheting square drive head allows you to turn fasteners in tight spaces without removing and repositioning the tool.

Check the accuracy of torque wrenches and screwdrivers—place your tool onto the tester with the included square drive connector and turn. The main pointer shows torque as it's measured; the memory pointer shows the maximum torque reached. Use these testers with hand tools only.

Note: The accuracy ratings do not apply to the lower 20% of the torque range.

These testers have a digital display and are accurate to ±1%. Place your torque wrench or screwdriver onto the tester with the included square drive connector and turn. Testers display torque as it's measured and the maximum torque reached. They also show the first torque peak reached to ensure accurate readings when testing click-style wrenches. Use with hand tools only.

Note: The accuracy ratings do not apply to the lower 10% of the torque range.