Capacity Capacity |
|---|
|
For Use With For Use With |
|---|
|
Shaft Material Shaft Material |
|---|
|
For Use On For Use On |
|---|
|
Mount Type Mount Type |
|---|
|
|
Mixer Speed Mixer Speed |
|---|
Motor Type Motor Type |
|---|
|
Propeller Material Propeller Material |
|---|
|
Overall Height Overall Height |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Direction of Operation Direction of Operation |
|---|
|
Motor Enclosure Type Motor Enclosure Type |
|---|
|
About Selecting a Mixer
More
Air-Powered Mixers for Intermediate Bulk Containers
The propellers on these air-powered mixers fit through standard intermediate bulk containers. Mixers come mounted to a bracket that centers the propeller in your container to prevent damage from the blades. Propellers are left hand and move clockwise when viewed from above to direct flow downward for efficient mixing.
Mixers with two propellers are used for faster mixing than mixers with one propeller.
Mixers for thin liquids are for liquids with a viscosity similar to water and light oils. Also known as direct-drive mixers, they operate at high speeds for rapid turnover.
Mixers for thick liquids are for liquids with a viscosity similar to honey and molasses. Also known as gear-drive mixers, they turn propellers at low speeds.
Mixers with forklift entry can be moved from one container to the next with a forklift.
Mixers | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Propellers | Shaft | Air Connection | Replacement Air Motors | ||||||||||||||
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Pipe Size  | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Mount Type | Each | Each | ||
For Thin Liquids | |||||||||||||||||
With Forklift Entry | |||||||||||||||||
| 1/2 | 600-2,000 | 1 | 5" | 316 Stainless Steel | 32" | 1" | 1/4 | NPT | Male | 45 cfm @ 80 psi | 38" | 30 | Clamp On | 0000000 | 000000000 | 0000000 | 0000000 |
| 1 | 100-400 | 2 | 11" | 316 Stainless Steel | 62" | 1" | 1/4 | NPT | Female | 22 cfm @ 80 psi | 80" | 77 | Clamp On | 0000000 | 00000000 | 0000000 | 000000 |
| 1 | 600-2,000 | 1 | 6" | 316 Stainless Steel | 32" | 1" | 1/4 | NPT | Male | 45 cfm @ 80 psi | 38" | 30 | Clamp On | 0000000 | 00000000 | 0000000 | 000000 |
| 2 | 600-2,000 | 2 | 6" | 316 Stainless Steel | 35" | 1" | 1/2 | NPT | Male | 80 cfm @ 80 psi | 43" | 41 | Clamp On | 0000000 | 00000000 | 0000000 | 000000 |
Without Forklift Entry | |||||||||||||||||
| 4 | 300-3,000 | 2 | 8" | 316 Stainless Steel | 36" | 3/4" | 1/2 | NPT | Male | 110 cfm @ 80 psi | 43" | 56 | Clamp On | 0000000 | 00000000 | 000000 | 00 |
For Thick Liquids | |||||||||||||||||
With Forklift Entry | |||||||||||||||||
| 1/2 | 10-350 | 1 | 10" | 316 Stainless Steel | 35" | 1" | 1/4 | NPT | Male | 22 cfm @ 80 psi | 47" | 77 | Clamp On | 000000 | 00000000 | 0000000 | 000000 |
| 1 | 10-350 | 1 | 12" | 316 Stainless Steel | 35" | 1" | 1/4 | NPT | Male | 22 cfm @ 80 psi | 47" | 77 | Clamp On | 000000 | 00000000 | 0000000 | 000000 |
| 2 | 10-350 | 2 | 12" | 316 Stainless Steel | 35" | 1" | 1/2 | NPT | Male | 70 cfm @ 80 psi | 49" | 86 | Clamp On | 000000 | 00000000 | 0000000 | 000000 |
Without Forklift Entry | |||||||||||||||||
| 4 | 40-400 | 2 | 14" | 304 Stainless Steel | 36" | 3/4" | 1/2 | NPT | Male | 110 cfm @ 80 psi | 43" | 96 | Clamp On | 0000000 | 00000000 | 000000 | 00 |
Electric Mixers for Intermediate Bulk Containers
The propeller fits through standard 275-gallon intermediate bulk containers. Mixers come mounted to a bracket that centers the propeller in your container to prevent damage from the blades. Forklift channels allow you to move them to multiple containers. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.
Mixers for thin liquids are for liquids with a viscosity similar to water and light oils. Also known as direct-drive mixers, they operate at high speeds for rapid turnover.
Mixers for thick liquids are for liquids with a viscosity similar to honey and molasses. Also known as gear-drive mixers, they turn the propeller at low speeds.
Propellers | Shaft | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Current, A | Frequency, Hz | Bracket Wd. | O'all Ht. | Wt., lbs. | Mount Type | Cord Lg., ft. | Motor Enclosure Type | Each | |
120/240V AC Single Phase—Three-Prong Plug | ||||||||||||||||
For Thin Liquids | ||||||||||||||||
| 1/2 | 1,750 | 1 | 5" | 316 Stainless Steel | 32" | 1" | 7.4/3.7 | 60 | 39 1/2" | 43" | 45 | Clamp On | 10 | Totally Enclosed Fan Cooled | 000000 | 000000000 |
| 1 | 1,750 | 1 | 6" | 316 Stainless Steel | 32" | 1" | 12.8/6.4 | 60 | 39 1/2" | 45" | 58 | Clamp On | 10 | Totally Enclosed Fan Cooled | 000000 | 00000000 |
For Thick Liquids | ||||||||||||||||
| 1/2 | 350 | 1 | 10" | 316 Stainless Steel | 35" | 1" | 7.4/3.7 | 60 | 39 1/2" | 52" | 92 | Clamp On | 10 | Totally Enclosed Fan Cooled | 000000 | 00000000 |
| 1 | 350 | 1 | 12" | 316 Stainless Steel | 35" | 1" | 12.8/6.4 | 60 | 39 1/2" | 54" | 105 | Clamp On | 10 | Totally Enclosed Fan Cooled | 000000 | 00000000 |
240/460V AC Three Phase—Wire Leads | ||||||||||||||||
For Thin Liquids | ||||||||||||||||
| 1/2 | 1,750 | 1 | 5" | 316 Stainless Steel | 32" | 1" | 2/1 | 60 | 39 1/2" | 43" | 41 | Clamp On | __ | Totally Enclosed Fan Cooled | 000000 | 00000000 |
| 1 | 1,750 | 1 | 6" | 316 Stainless Steel | 32" | 1" | 3.4/1.7 | 60 | 39 1/2" | 45" | 49 | Clamp On | __ | Totally Enclosed Fan Cooled | 000000 | 00000000 |
For Thick Liquids | ||||||||||||||||
| 1/2 | 350 | 1 | 10" | 316 Stainless Steel | 35" | 1" | 2/1 | 60 | 39 1/2" | 52" | 88 | Clamp On | __ | Totally Enclosed Fan Cooled | 000000 | 00000000 |
| 1 | 350 | 1 | 12" | 316 Stainless Steel | 35" | 1" | 3.4/1.7 | 60 | 39 1/2" | 53" | 96 | Clamp On | __ | Totally Enclosed Fan Cooled | 000000 | 00000000 |
Clamp-Mount Electric Mixers for Small Batches
Attach to the rim of a batch can or small container. Also known as direct-drive mixers, these operate at high speeds for rapid turnover. Use them to mix liquids with a viscosity similar to water and light oils. Motor is totally enclosed fan cooled (TEFC) for use in environments with splashing water and dust. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.
Propellers | Shaft | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Cap., gal. | Current, A | Frequency, Hz | O'all Ht. | Wt., lbs. | Max. Clamp Opening | Cord Lg., ft. | Each | |
120V AC Single Phase—Three-Prong Plug | |||||||||||||||
For Thin Liquids | |||||||||||||||
| 1/20 | 1,550 | 1 | 3" | 316 Stainless Steel | 12" | 5/16" | 50 | 1.6 | 60 | 18 7/16" | 10 | 2" | 6 | 0000000 | 0000000 |
| 1/20 | 1,550 | 1 | 3" | 316 Stainless Steel | 18" | 5/16" | 50 | 1.6 | 60 | 24 7/16" | 11 | 2" | 6 | 0000000 | 000000 |
| 1/20 | 1,550 | 1 | 3" | 316 Stainless Steel | 24" | 5/16" | 50 | 1.6 | 60 | 30 7/16" | 11 | 2" | 6 | 0000000 | 000000 |
| 1/20 | 1,550 | 1 | 3" | 316 Stainless Steel | 30" | 5/16" | 50 | 1.6 | 60 | 36 7/16" | 11 | 2" | 6 | 0000000 | 000000 |
120/240V AC Single Phase—Wire Leads | |||||||||||||||
For Thin Liquids | |||||||||||||||
| 1/2 | 1,425 | 1 | 4" | 316 Stainless Steel | 32" | 5/8" | 100 | 8.2/4.1 | 50 | 43 3/16" | 47 | 2" | __ | 0000000 | 00000000 |
| 1/2 | 1,725 | 1 | 4" | 316 Stainless Steel | 32" | 5/8" | 100 | 8.8/4.4 | 60 | 43 3/16" | 38 | 2" | __ | 0000000 | 000000 |
| 1/3 | 1,725 | 1 | 4" | 316 Stainless Steel | 32" | 1/2" | 100 | 6.6/3.3 | 60 | 42" | 30 | 2" | __ | 0000000 | 000000 |
Pipe-Mount Air-Powered Mixers for Small Batches
The pipe-clamp connection allows you to quickly raise or lower these mixers to change containers. Also known as direct-drive mixers, they operate at high speeds for rapid turnover. Use them to mix liquids with a viscosity similar to water and light oils. A needle valve allows you to adjust the mixing speed. Propellers are left hand and move clockwise when viewed from above to direct flow downward for efficient mixing.
Mixer with one propeller comes with four shafts of multiple lengths.
Mixer with two propellers is used for faster and more thorough mixing than mixers with one propeller.
Propellers | Shaft | Air Connection | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Mixer Speed, rpm | For Pipe OD | No. of | Dia. | Material | Lg. | Dia. | Cap., gal. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Each | |
For Thin Liquids | ||||||||||||||||
| 1/2 | 300-1,750 | 1 1/2" | 1 | 4" | 316 Stainless Steel | 12" 16" 20" 24" | 5/8" | 100 | 1/4 | NPT | Female | 25 cfm @ 80 psi | 17 13/16" 21 13/16" 25 13/16" 29 13/16" | 12 | 0000000 | 000000000 |
| 1/2 | 300-1,750 | 1 1/2" | 2 | 4" | 316 Stainless Steel | 32" | 5/8" | 100 | 1/4 | NPT | Female | 25 cfm @ 80 psi | 37 13/16" | 17 | 0000000 | 00000000 |
Stand-Mount Electric Mixers for Small Batches
Clamp the 10" long bar of these mixers onto the vertical shaft of a stand (sold separately). Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing. An adjustment dial allows you alter your mixing speed.
Mixers for thin liquids are for liquids with a viscosity similar to water and light oils. Also known as direct-drive mixers, they operate at high speeds for rapid turnover.
Mixer for thick liquids is for liquids with a viscosity similar to honey and molasses. Also known as a gear-drive mixer, it turns the propeller at low speeds.
Mixers | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Propellers | Shaft | Replacement Propellers | |||||||||||||||
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Cap., gal. | Current, A | Frequency, Hz | O'all Ht. | Wt., lbs. | Cord Lg., ft. | Motor Enclosure Type | Each | Each | ||
120V AC Single Phase—Three-Prong Plug | |||||||||||||||||
For Thin Liquids | |||||||||||||||||
| 1/40 | 80-4,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 5 | 0.5 | 60 | 20 1/4" | 6 | 6 | Totally Enclosed Nonventilated | 0000000 | 0000000 | 000000 | 00 |
| 1/40 | 80-4,000 | 1 | 2 1/2" | 316 Stainless Steel | 18" | 3/8" | 5 | 0.5 | 60 | 26 1/4" | 7 | 6 | Totally Enclosed Nonventilated | 0000000 | 000000 | 000000 | 00 |
| 1/40 | 80-4,000 | 1 | 2 1/2" | 316 Stainless Steel | 24" | 3/8" | 5 | 0.5 | 60 | 32 1/4" | 8 | 6 | Totally Enclosed Nonventilated | 0000000 | 000000 | 000000 | 00 |
| 1/40 | 80-4,000 | 1 | 2 1/2" | 316 Stainless Steel | 30" | 3/8" | 5 | 0.5 | 60 | 38 1/4" | 9 | 6 | Totally Enclosed Nonventilated | 0000000 | 000000 | 000000 | 00 |
| 1/15 | 40-2,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 5 | 1.1 | 60 | 21" | 8 | 6 | Totally Enclosed Nonventilated | 00000000 | 000000 | 0000000 | 000000 |
| 1/10 | 5-1,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 26 | 0.8 | 60 | 25" | 9 | 6 | Totally Enclosed Nonventilated | 00000000 | 000000 | 0000000 | 00000 |
| 1/8 | 40-1,200 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 26 | 0.8 | 60 | 23" | 12 | 6 | Totally Enclosed Nonventilated | 0000000 | 00000000 | 0000000 | 00000 |
For Thick Liquids | |||||||||||||||||
| 1/15 | 10-350 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 13 | 1.1 | 60 | 24" | 9 | 6 | Totally Enclosed Nonventilated | 0000000 | 00000000 | 0000000 | 00000 |
| Replacement Carbon Brushes for 1/15, 1/10, and 1/8 hp Mixers | 0000000 | Pair | 000000 |
| Tabletop Stand for Mixers with 12" and 18" Shaft Lengths | 00000000 | Each | 000000 |
| Replacement Shaft for Mixers with 12" Long Shaft | 0000000 | Each | 00000 |
| Container-Mount Stand for Mixers with 24" and 30" Shaft Lengths | 00000000 | Each | 000000 |
| Replacement Carbon Brushes for 1/40 hp Mixers | 0000000 | Pair | 00000 |
Hand-Held Air-Powered Mixers for Small Batches
Manually control and monitor mixing. Also known as direct-drive mixers, they operate at high speeds for rapid turnover. Use them to mix liquids with a viscosity similar to water and light oils. Adjust mixing speed with the needle valve. Mixers have a removable shaft and a built-in propeller. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.
Shaft | Propellers | Air Connection | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | hp | Mixer Speed, rpm | No. of | Dia. | Material | Cap., gal. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Each | |
For Thin Liquids | |||||||||||||||
| 15" | 1/4" | 1/2 | 300-1,200 | 1 | 2 5/8" | 304 Stainless Steel | 2 | 1/4 | NPT | Female | 15.9 cfm @ 80 psi | 21 3/4" | 8 | 0000000 | 0000000 |
| 21" | 1/2" | 1/2 | 300-800 | 1 | 5" | 304 Stainless Steel | 10 | 1/4 | NPT | Female | 13.7 cfm @ 80 psi | 27 7/16" | 11 | 0000000 | 000000 |
| 40" | 1/2" | 1/2 | 300-450 | 1 | 5" | 304 Stainless Steel | 55 | 1/4 | NPT | Female | 11.9 cfm @ 80 psi | 46 7/16" | 18 | 0000000 | 000000 |
Stand-Mount Air-Powered Mixers for Small Batches
Clamp the 10" long bar of these mixers onto the vertical shaft of a stand (sold separately). A needle valve lets you adjust mixing speed. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.
Mixers for thin liquids are for liquids with a viscosity similar to water and light oils. Also known as direct-drive mixers, they operate at high speeds for rapid turnover.
Mixers for thick liquids are for liquids with a viscosity similar to honey and molasses. Also known as gear-drive mixers, they turn the propeller at low speeds.
Mixers | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Propellers | Shaft | Air Connection | Motor Repair Kits | ||||||||||||||
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Cap., gal. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Each | Each | ||
For Thin Liquids | |||||||||||||||||
| 1/3 | 500-10,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 16 1/2" | 5 | 0000000 | 0000000 | 0000000 | 0000000 |
| 1/3 | 500-10,000 | 1 | 2 1/2" | 316 Stainless Steel | 18" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 22 1/2" | 5 | 0000000 | 000000 | 0000000 | 000000 |
| 1/3 | 500-10,000 | 1 | 2 1/2" | 316 Stainless Steel | 24" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 28 1/2" | 5 | 0000000 | 000000 | 0000000 | 000000 |
| 1/3 | 500-10,000 | 1 | 2 1/2" | 316 Stainless Steel | 30" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 34 1/2" | 5 | 0000000 | 000000 | 0000000 | 000000 |
| 1/2 | 500-7,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 26 | 1/4 | NPT | Male | 27 cfm @ 80 psi | 16 3/4" | 5 | 0000000 | 000000 | 0000000 | 000000 |
For Thick Liquids | |||||||||||||||||
| 1/3 | 15-170 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 22" | 7 | 0000000 | 000000 | 0000000 | 000000 |
| 1/3 | 100-1,200 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 26 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 19 1/2" | 6 | 0000000 | 000000 | 0000000 | 000000 |
| 1/2 | 100-1,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 26 | 1/4 | NPT | Male | 27 cfm @ 80 psi | 20" | 6 | 0000000 | 000000 | 0000000 | 000000 |
| Tabletop Stand for Mixers with 12" and 18" Shaft Lengths | 00000000 | Each | 0000000 |
| Replacement Needle Valve | 0000000 | Each | 00000 |
| Replacement Propeller | 0000000 | Each | 00000 |
| Replacement Shaft for Mixers with 12" Long Shaft | 0000000 | Each | 00000 |
| Replacement Air Motor for 1/3 hp Mixers | 0000000 | Each | 000000 |
| Container-Mount Stand for Mixers with 24" and 30" Shaft Lengths | 00000000 | Each | 000000 |
Air-Powered Mixers with Batch Cans
Mix and dispense from the same container. Also known as direct-drive mixers, these operate at high speeds for rapid turnover. Use them to mix liquids with a viscosity similar to water and light oils. Adjust the mixing speed with the needle valve. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.
Mixers with 304 stainless steel containers resist corrosion in harsh environments.
Mixers | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Propellers | Shaft | Air Connection | Repl. Cans | Repl. Lids | ||||||||||||||
| Cap., gal. | hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Each | Each | Each | |||
For Thin Liquids | ||||||||||||||||||
Steel Container with Plastic Spigot | ||||||||||||||||||
| 5 | 3/4 | 0-1,750 | 1 | 5" | 316 Stainless Steel | 10" | 1/2" | 1/4 | NPT | Female | 20 cfm @ 80 psi | 17" | 0000000 | 0000000 | 0000000 | 0000000 | 0000000 | 000000 |
| 10 | 3/4 | 0-1,750 | 1 | 5" | 316 Stainless Steel | 12" | 1/2" | 1/4 | NPT | Female | 20 cfm @ 80 psi | 22 1/2" | 0000000 | 00000000 | 0000000 | 000000 | 0000000 | 000000 |
304 Stainless Steel Container with 316 Stainless Steel 3/4 NPT Ball Valve | ||||||||||||||||||
| 5 | 3/4 | 0-1,750 | 1 | 5" | 316 Stainless Steel | 10" | 1/2" | 1/4 | NPT | Female | 20 cfm @ 80 psi | 16 13/32" | 0000000 | 00000000 | 0000000 | 000000 | 0000000 | 000000 |
| 10 | 3/4 | 0-1,750 | 1 | 5" | 316 Stainless Steel | 12" | 1/2" | 1/4 | NPT | Female | 20 cfm @ 80 psi | 21" | 0000000 | 00000000 | 0000000 | 000000 | 0000000 | 000000 |
| Each | ||
| 00000000 | 0000000 |