Dynamic Load Capacity Dynamic Load Capacity |
|---|
|
Roller Material Roller Material |
|---|
|
Bearing Material Bearing Material |
|---|
|
Overall Height Overall Height |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Roller Diameter Roller Diameter |
|---|
Carriage Width Carriage Width |
|---|
Rail Width Rail Width |
|---|
Material Material |
|---|
|
Carriage Material Carriage Material |
|---|
|
Carriage Length Carriage Length |
|---|
|
|
|
Hardness Hardness |
|---|
|
Lubrication Lubrication |
|---|
|
About Moment Loads
More
Track Rollers and Guide Rails
These steel track rollers and guide rails support loads up to 300 lbs.
Mount along a wall or other vertical surface by drilling holes in the rail or using a mounting bracket. To install, weld the bracket to the back of the rail.
End stops prevent rollers from overtravel but are not designed to support loads.
For technical drawings and 3-D models, click on a part number.
Steel Track Rollers | Powder-Coated Steel Guide Rails | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | Roller Dia. | Roller Wd. | Hex Wd. | Shoulder Lg. | Stud Dia. | Stud Lg. | Thread Size  | Thread Pitch | Thread Lg. | Max. Temp., °F | Each | Rail Lengths, ft. | Per Ft. | ||
| 1.63" | 300 | 1.38" | 0.38" | 0.56" | 0.425" | 0.3125" | 0.63" | 5/16"-18 | __ | 0.45" | 175° | 00000000 | 000000 | 00000000 | 000000 | |
| 1.63" | 300 | 1.38" | 0.38" | 0.56" | 0.425" | 0.3125" | 0.63" | M8 | 1mm | 0.45" | 175° | 000000000 | 00000 | 00000000 | 00000 | |
Corrosion-Resistant Track Rollers and Guide Rails
Made of stainless steel, these track rollers and guide rails are more corrosion resistant than steel rollers and rails. Mount along a wall or other vertical surface.
For technical drawings and 3-D models, click on a part number.
Light Duty Track Rollers and Guide Rails
Nylon rollers and aluminum rails make these good for light duty applications. Mount along a wall or other vertical surface.
For technical drawings and 3-D models, click on a part number.
Nylon Plastic Track Rollers | Anodized Aluminum Guide Rails | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | Roller Dia. | Roller Wd. | Hex Wd. | Shoulder Lg. | Stud Dia., mm | Stud Lg. | Thread Size | Thread Pitch, mm | Thread Lg. | Max. Temp., °F | Each | Rail Lengths, ft. | Per Ft. | ||
| 0.79" | 5 | 0.58" | 0.25" | 0.43" | 0.12" | 6 | 0.3" | M6 | 1 | 0.3" | 155° | 00000000 | 000000 | 00000000 | 000000 | |
| 1.02" | 10 | 0.77" | 0.31" | 0.47" | 0.14" | 8 | 0.32" | M8 | 1.25 | 0.32" | 155° | 00000000 | 00000 | 00000000 | 00000 | |
Self-Aligning Side-Mount Track
Roller Carriages and Guide Rails
Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel. A complete system includes a fixed-alignment carriage and rail on one side and a self-aligning carriage and rail on the other. All components are sold separately.
Carriages can be adjusted for a snug or loose fit on the rail. They have permanently lubricated rollers to save maintenance time and effort.
Fixed-alignment rails have a C-shaped profile that ensures the system travels in a straight line.
Self-aligning rails have a rectangular profile that allows the carriage to move freely from side to side to compensate for misalignment.
For technical drawings and 3-D models, click on a part number.
Zinc-Plated Steel Carriages with Adjustable Steel Rollers | Zinc-Plated Steel Guide Rails | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd., mm | Dynamic Load Cap., lbs. | O'all Ht., mm | Roller Dia., mm | Misalignment Capability, mm | Max. Temp., °F | Each | Rail Lengths, mm | Per mm | ||
10 mm Carriage Wd.—60 mm Carriage Lg. | ||||||||||
Fixed Alignment | ||||||||||
| 19.2 | 70 | 17.8 | 14 | __ | 245° | 000000 | 0000000 | 0000000 | 00000 | |
Self Aligning | ||||||||||
| 20.5 | 70 | 18.3 | 14 | 1.2 | 245° | 000000 | 000000 | 0000000 | 000 | |
20 mm Carriage Wd.—80 mm Carriage Lg. | ||||||||||
Fixed Alignment | ||||||||||
| 29.5 | 190 | 26.5 | 22.8 | __ | 245° | 000000 | 000000 | 0000000 | 000 | |
Self Aligning | ||||||||||
| 31.8 | 190 | 28 | 23.2 | 2 | 245° | 000000 | 000000 | 0000000 | 000 | |
Side-Mount Track Roller Carriages and Guide Rails
Mount along a wall or other vertical surface.
Carriages with adjustable rollers can be adjusted for a snug or loose fit on the rail.
Carriages with wipers sweep away dust and other contaminants.
For technical drawings and 3-D models, click on a part number.
Aluminum Carriages with Plastic Wipers and Adjustable Steel Rollers | Aluminum Guide Rails | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd., mm | Dynamic Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Roller Dia., mm | Max. Temp., °F | Each | Rail Lengths, mm | Per mm | ||
| 30 | 220 | 28 | 25 | 87 | 16 | 175° | 00000000 | 0000000 | 0000000 | 00000 | |
| 45 | 590 | 33 | 38 | 117 | 24 | 175° | 00000000 | 000000 | 0000000 | 000 | |
| 65 | 1,300 | 42 | 51 | 162 | 35 | 175° | 00000000 | 000000 | 0000000 | 000 | |
Corrosion-Resistant Side-Mount Track
Roller Carriages and Guide Rails
These track roller carriages and guide rails are stainless steel for use in wet, corrosive environments. Carriages can be adjusted for a snug or loose fit on the rail. A wiper on one side of the carriage sweeps away dust and other contaminants.
For technical drawings and 3-D models, click on a part number.
316 Stainless Steel Carriages with Adjustable 440 Stainless Steel Rollers | 316 Stainless Steel Guide Rails | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | O'all Ht. | Carriage Wd. | Carriage Lg. | Roller Dia. | Max. Temp., °F | Each | Rail Lengths, ft. | Per Ft. | ||
| 0.76" | 65 | 0.63" | 0.71" | 2.80" | 0.55" | 210° | 000000 | 000000 | 00000000 | 000000 | |
| 1.16" | 170 | 0.81" | 1.06" | 3.15" | 0.90" | 210° | 000000 | 000000 | 00000000 | 00000 | |
| 1.83" | 350 | 1.22" | 1.57" | 5.31" | 1.40" | 210° | 000000 | 000000 | 00000000 | 00000 | |
Light Duty Side-Mount Track
Roller Carriages and Guide Rails
Use these carriages and guide rails for light loads where precise movement is not required.
For technical drawings and 3-D models, click on a part number.
Track Roller Carriages and Guide Rails
V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail. Wipers sweep away dust and contaminants and distribute lubricant along the rail. Carriages can be adjusted for a snug or loose fit on the rail. Mount in any orientation without affecting load capacity.
0.516" wide guide rails require a support rail (sold separately) for carriage clearance. Order one per guide rail.
For technical drawings and 3-D models, click on a part number.
Aluminum Carriages with Adjustable Steel Rollers | Aluminum Support Rails | Steel Guide Rails | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | O'all Ht. | Carriage Wd. | Carriage Lg. | Max. Temp., °F | Each | Rail Lengths | Per Inch | Rail Lengths | Per Inch | |||
| 0.516" | 110 | 0.788" | 1.75" | 2" | 245° | 000000 | 0000000 | 000000 | 00000 | 000000 | 00000 | ||
| Each | Per mm | ||||||||||||
| 50mm | 220 | 32mm | 80mm | 90mm | 155° | 000000 | 000000 | __ | 000000 | 00 | 0000000 | 000 | |
| 72mm | 550 | 43mm | 116mm | 127mm | 155° | 000000 | 000000 | __ | 000000 | 00 | 0000000 | 000 | |
| 102mm | 1,450 | 57mm | 165mm | 172mm | 155° | 000000 | 000000 | __ | 000000 | 00 | 0000000 | 000 | |
| 140mm | 3,500 | 69mm | 222mm | 242mm | 155° | 000000 | 000000 | __ | 000000 | 00 | 0000000 | 000 | |
High-Temperature Track Roller Carriages and Guide Rails
High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer. Their V-shaped rails allow them to operate well in dirty environments because the debris won’t get trapped on the rail. Wipers sweep away dust and contaminants and distribute lubricant along the rail. Carriages can be adjusted for a snug or loose fit on the rail. Mount in any orientation without affecting load capacity.
Guide rails require a support rail (sold separately) for carriage clearance. Order one per guide rail.
For technical drawings and 3-D models, click on a part number.
Light Duty Track Roller Carriages and Guide Rails
Nylon rollers provide low-friction movement for light loads and corrosive environments. The V-shaped profile of the rollers and rails prevents debris from becoming trapped on the rail. Wipers sweep away dust and contaminants and distribute lubricant along the rail. Carriages can be adjusted for a snug or loose fit on the rail. Mount in any orientation without affecting load capacity.
Guide rails require a support rail (sold separately) for carriage clearance. Order one per guide rail.
For technical drawings and 3-D models, click on a part number.
Side-Mount Track Roller Carriages for T-Slotted Framing
Combine with a T-slotted rail to add linear motion to your assembly. Carriages can be adjusted for a snug or loose fit on the rail.
T-slotted rails can be easily cut to length and drilled for mounting.
View additional T-slot hardware and accessories.
End caps mount on the rails to prevent rollers from overtravel.
For technical drawings and 3-D models, click on a part number.
for
Double Rail
Aluminum Carriages with Adjustable Nylon Plastic Rollers | T-Slot Fasteners | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | O'all Ht. | Carriage Wd. | Carriage Lg. | Roller Dia. | Bearing Material | Max. Temp., °F | Includes | Each | Pkg. | ||
For Single Rail | ||||||||||||
| 1" | 25 | 1 5/16" | 3 1/8" | 1" | 1 1/2" | Bronze | 150° | Two Socket Head Screws, Two T-Slot Fasteners | 000000 | 000000 | 000000000 | 00000 |
| 1 1/2" | 25 | 1 7/8" | 4 5/8" | 1 1/2" | 2" | Bronze | 150° | Two Socket Head Screws, Two T-Slot Fasteners | 000000 | 00000 | 00000000 | 0000 |
For Double Rail | ||||||||||||
| 2" | 25 | 1 5/16" | 4 1/8" | 1" | 1 1/2" | Bronze | 150° | Two Socket Head Screws, Two T-Slot Fasteners | 000000 | 00000 | 000000000 | 0000 |
| 3" | 25 | 1 7/8" | 6 1/8" | 1 1/2" | 2" | Bronze | 150° | Two Socket Head Screws, Two T-Slot Fasteners | 000000 | 00000 | 00000000 | 0000 |
Side-Mount Ball Bearing Carriages and Guide Rails
Mount to vertical surfaces for applications where tight tolerances aren't required. End seals keep lubricant in and dirt out.
Use the connector plates to mount rails end to end for greater travel.
For technical drawings and 3-D models, click on a part number.
304 Stainless Steel Carriages | 304 Stainless Steel Guide Rails | Connector Plates | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd., mm | Dynamic Load Cap. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Each | Rail Lengths, mm | Per mm | Each | |||
| 24.8 | Not Rated | 12 | 66 | 42 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 | |
| 24.8 | Not Rated | 12 | 66 | 42 | 0000000 | 00000 | 0000000 | 000 | 0000000 | 0000 | |
| 37.4 | Not Rated | 16.2 | 100 | 60 | 0000000 | 00000 | 0000000 | 000 | 0000000 | 0000 | |
| 50.4 | Not Rated | 17 | 126 | 85 | 0000000 | 00000 | 0000000 | 000 | 0000000 | 0000 | |
Angle Rails for V-Groove Track Rollers
Use these rails with any track rollers that have a 90° V-groove. The bottom can be drilled for mounting.
420 stainless steel rails are more corrosion resistant than steel rails. Use them in areas where frequent washdowns with harsh cleaners take place.
Rails with a Rockwell hardness rating offer improved wear resistance over unhardened rails. The higher the hardness rating, the harder the metal.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Angle Ht. | 1 ft. | 2 ft. | 3 ft. | 4 ft. | 5 ft. | 6 ft. | |
Steel | |||||||||
| 7/16" | 3/16" | 1/8" | 00000000 | ||||||
| 5/8" | 1/4" | 3/16" | 000000 | ||||||
| 7/8" | 11/32" | 1/4" | 000000 | ||||||
| 1 1/16" | 7/16" | 5/16" | 000000 | ||||||
Steel with Rockwell C53 Hardness | |||||||||
| 7/16" | 3/16" | 1/8" | 00000000 | ||||||
| 5/8" | 1/4" | 3/16" | 000000 | ||||||
| 7/8" | 11/32" | 1/4" | 000000 | ||||||
| 1 1/16" | 7/16" | 5/16" | 000000 | ||||||
420 Stainless Steel | |||||||||
| 7/16" | 3/16" | 1/8" | 00000000 | ||||||
| 5/8" | 1/4" | 3/16" | 00000000 | ||||||
| 7/8" | 11/32" | 1/4" | 00000000 | ||||||
420 Stainless Steel with Rockwell C40 Hardness | |||||||||
| 7/16" | 3/16" | 1/8" | 00000000 | ||||||
| 5/8" | 1/4" | 3/16" | 00000000 | ||||||
| 7/8" | 11/32" | 1/4" | 00000000 | ||||||