Mounting Style Mounting Style |
|---|
 |  |
| Through Hole | Surface |
Arm Length Arm Length |
|---|
Cam Latch Type Cam Latch Type |
|---|
|
Hasp Type Hasp Type |
|---|
|
Turn Direction Turn Direction |
|---|
|
Swinging Latch Type Swinging Latch Type |
|---|
|
Strike Plate Height Strike Plate Height |
|---|
|
|
|
For Maximum Padlock Shackle Diameter For Maximum PadlockShackle Diameter |
|---|
|
|
|
Strike Plate Length Strike Plate Length |
|---|
|
|
|
Projection Projection |
|---|
|
|
|
Arm Height Arm Height |
|---|
|
|
|
Mounting Hole Style Mounting Hole Style |
|---|
|
About Cam Latches and Locks
More
Heavy Duty Swinging Bar Latches
Designed to stand up to heavy use, this latch is often seen on refrigerators and truck doors. It's reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Arm Mounting Plate | Strike Plate | Mounting | Mounting Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arm Lg. | Projection | Lg. | Ht. | Lg. | Ht. | Fasteners Included | Screw Size | No. of | Dia. | Style | Each | |
Zinc-Plated Steel—Dull | ||||||||||||
| 7 1/4" | 1 7/8" | 1 1/2" | 2 1/4" | 7/8" | 3 3/8" | No | No. 10 | 6 | 3/16" | Countersunk | 0000000 | 0000000 |
Heavy Duty Padlockable Swinging Bar Latches
In addition to being padlockable, this heavy duty latch comes with two handles for access from the inside as well as the outside. It's often used on refrigerators and truck doors. It is reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Rod | Arm Mounting Plate | Strike Plate | Mounting | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arm Lg. | Projection | For Min. Door Thick. | Dia. | Lg. | Thread Lg. | For Max. Padlock Shackle Dia. | Lg. | Ht. | Lg. | Ht. | Fasteners Included | Screw Size | No. of | Dia. | Style | Each | |
Through-Hole Mount | |||||||||||||||||
Zinc-Plated Iron—Dull (Zinc Handle) | |||||||||||||||||
| 7 1/4" | 2 1/8" | 2" | 9/16" | 8 3/4" | 7" | 3/8" | 1 1/2" | 2 1/4" | 7/8" | 7 3/8" | No | No. 10 | 6 | 3/16" | Countersunk | 0000000 | 0000000 |
L-Handle Padlockable Multipoint Latches for Heavy Doors
Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors. This padlockable latch has two handles; an outside handle with a spindle that mounts through the door and an inside safety-release handle that opens the latch even if the outside handle is locked. It has a straight cam for side latching. For top and bottom latching, rods connect the top and bottom slide bolts. Use a hacksaw to cut rods and spindle to size. Select the turn direction of the latch when mounting the cam.
For technical drawings and 3-D models, click on a part number.
Handle | Mounting Hole Ctr.-to-Ctr. | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | For Door Ht. | Latching Distance | For Through Hole Dia. | Lg. | Proj. | Inside Lg. | Rear Proj. | For Max. Padlock Shackle Dia. | Straight Cam Lg. | Handle Plate | Latch Plate | Fasteners Included | Screw Size | For Use On | Each | |
Through-Hole Mount | ||||||||||||||||
Zinc-Plated Steel—Dull | ||||||||||||||||
| 5" | 27"-90" | 1 1/2" | 7/8" | 7 1/2" | 2 1/4" | 9 1/4" | 2 3/8" | 7/16" | 3 1/16" | 7 3/8", 1 1/4" | 3 1/8", 2 3/4" | No | 1/4" | Metal | 0000000 | 0000000 |
L-Handle Keyed Multipoint Locks for Heavy Doors
Choose this keyed alike lock if you need several that open with the same key. Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors. The lock has two handles; an outside handle with a spindle that mounts through the door and an inside safety-release handle that opens the latch even if the outside handle is locked. It has a straight cam for side latching. For top and bottom latching, rods connect the top and bottom slide bolts. Use a hacksaw to cut rods and spindle to size. Select the turn direction of the lock when mounting the cam.
For technical drawings and 3-D models, click on a part number.
Handle | Mounting Hole Ctr.-to-Ctr. | Mounting | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | For Door Ht. | Latching Distance | For Through Hole Dia. | Lg. | Proj. | Inside Lg. | Rear Proj. | Straight Cam Lg. | Handle Plate | Latch Plate | Fasteners Included | Screw Size | Key Number | No. of Keys Included | For Use On | Each | |
Through-Hole Mount | |||||||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||||||
| 5" | 27"-90" | 1 1/2" | 7/8" | 7 1/2" | 2 1/4" | 9 1/4" | 2 3/8" | 3 1/16" | 7 3/8", 1 1/4" | 3 1/8", 2 3/4" | No | 1/4" | 1250 | 2 | Metal | 0000000 | 0000000 |
Extra-Reach L-Handle Padlockable Cam Latches
With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets. The handle and latch are each sold separately. Select the turn direction of the latch when mounting the cam.
For technical drawings and 3-D models, click on a part number.
Handle | Mounting Plate | Mounting | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Thick. | For Through Hole Dia. | Lg. | Wd. | Projection | Shaft Lg. | For Max. Padlock Shackle Dia. | Ht. | Wd. | Fasteners Included | Screw Size | No. of | Dia. | Ctr.-to-Ctr. | For Use On | Each | |
Zinc-Plated Steel—Dull | ||||||||||||||||
| 3" | 1/2" | 6 7/8" | 7/8" | 1 7/8" | 3 3/4" | 1/2" | 2 3/4" | 2 1/4" | No | No. 10 | 3 | 1/4" | 1 7/8", 1 1/2" | Metal, Plastic, Wood | 0000000 | 000000 |
304 Stainless Steel—Dull | ||||||||||||||||
| 3" | 1/2" | 6 1/16" | 7/8" | 1 13/16" | 3 1/4" | 7/16" | 3 1/2" | 2" | No | No. 10 | 4 | 7/32" | 2 1/4", 1 1/2" | Metal, Plastic, Wood | 0000000 | 00000 |
Straight Cam | Mounting Plate | Mounting | Mounting Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Projection | Ht. | Wd. | Fasteners Included | Screw Size | No. of | Dia. | Ctr.-to-Ctr. | For Use On | Each | |
Zinc-Plated Steel—Dull | ||||||||||||
| 5/8" | 11/16" | 3/8" | 3" | 1" | No | No. 14 | 2 | 9/32" | 2 3/8" | Metal, Plastic, Wood | 00000000 | 00000 |
Replacement Strikes for Padlockable Hasps
Strike Plate | Mounting | Mounting Holes | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Projection | For Max. Padlock Shackle Dia. | Lg. | Ht. | Thick. | Fasteners Included | Screw Size | No. of | Dia. | Each | |
Zinc-Plated Steel—Dull | ||||||||||
Fixed | ||||||||||
| 3/4" | 5/16" | 1 3/16" | 1 1/8" | 1/8" | Yes | No. 7 | 4 | 3/16" | 000000 | 00000 |
| 15/16" | 3/8" | 1 5/8" | 1 3/8" | 1/8" | Yes | No. 8 | 4 | 1/4" | 000000 | 0000 |
| 1 7/16" | 27/32" | 2 1/4" | 1 7/8" | 1/8" | No | No. 10 | 4 | 5/16" | 000000 | 0000 |
Rotating | ||||||||||
| 1 1/4" | 3/8" | 1 5/8" | 1 5/8" | 1/8" | Yes | No. 8 | 4 | 1/4" | 000000 | 0000 |
Rotating-Eye Padlockable Hasps
Turn the padlock eye to fasten these hasps without a padlock.
For technical drawings and 3-D models, click on a part number.
Hasps | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Arm | Strike Plate | Mounting | Mounting Holes | Replacement Strikes | |||||||||||
| Lg. | Ht. | Thick. | Projection | For Max. Padlock Shackle Dia. | Lg. | Ht. | Fasteners Included | Screw Size | No. of | Dia. | Style | Each | Each | ||
Zinc-Plated Steel—Dull | |||||||||||||||
| 3 5/16" | 1 1/2" | 1/8" | 1" | 3/8" | 1 9/16" | 1 9/16" | Yes | No. 8 | 7 | 1/4" | Countersunk | 000000 | 00000 | 000000 | 00000 |
| 4 5/16" | 1 1/2" | 1/8" | 1" | 3/8" | 1 9/16" | 1 9/16" | Yes | No. 8 | 7 | 1/4" | Countersunk | 000000 | 0000 | 000000 | 0000 |
| 6" | 1 3/4" | 1/8" | 1 1/4" | 3/8" | 1 5/8" | 1 5/8" | Yes | No. 8 | 7 | 1/4" | Countersunk | 000000 | 0000 | 000000 | 0000 |
Black Painted Steel | |||||||||||||||
| 3 5/16" | 1 1/2" | 1/8" | 1" | 3/8" | 1 9/16" | 1 9/16" | Yes | No. 8 | 7 | 1/4" | Countersunk | 000000 | 0000 | 000000 | 00 |
| 4 5/16" | 1 1/2" | 1/8" | 1" | 3/8" | 1 9/16" | 1 9/16" | Yes | No. 8 | 7 | 1/4" | Countersunk | 000000 | 0000 | 000000 | 00 |
Chrome-Plated Brass—Polished | |||||||||||||||
| 2 5/8" | 1" | 1/8" | 1" | 5/16" | 13/16" | 7/8" | No | No. 6 | 6 | 3/16" | Countersunk | 000000 | 0000 | 000000 | 00 |
Brass—Polished | |||||||||||||||
| 2 5/8" | 1" | 1/8" | 1" | 5/16" | 13/16" | 7/8" | No | No. 6 | 6 | 3/16" | Countersunk | 000000 | 0000 | 000000 | 00 |
304 Stainless Steel—Polished | |||||||||||||||
| 1 1/2" | 7/8" | 1/16" | 7/8" | 7/16" | 5/8" | 7/8" | Yes | No. 4 | 4 | 1/8" | Countersunk | 0000000 | 00000 | 000000 | 00 |
| 1 7/8" | 7/8" | 1/16" | 15/16" | 7/16" | 3/4" | 7/8" | Yes | No. 4 | 4 | 1/8" | Countersunk | 0000000 | 00000 | 000000 | 00 |
| 2 7/16" | 15/16" | 1/16" | 1" | 7/16" | 15/16" | 15/16" | Yes | No. 4 | 6 | 1/8" | Countersunk | 0000000 | 00000 | 000000 | 00 |
| 2 5/8" | 1 1/8" | 1/8" | 15/16" | 5/16" | 1 1/16" | 1 1/4" | No | No. 8 | 4 | 3/16" | Countersunk | 00000000 | 00000 | 000000 | 00 |
| 2 7/8" | 1 1/16" | 1/16" | 1 1/16" | 15/32" | 1 1/8" | 1 1/16" | Yes | No. 6 | 7 | 1/8" | Countersunk | 0000000 | 00000 | 000000 | 00 |
| 3 3/4" | 1 7/16" | 1/16" | 1 5/16" | 5/8" | 1 3/8" | 1 3/8" | Yes | No. 8 | 7 | 3/16" | Countersunk | 0000000 | 00000 | 000000 | 00 |
| 4 9/16" | 1 5/8" | 1/8" | 1 7/16" | 11/16" | 1 5/8" | 1 9/16" | Yes | No. 8 | 8 | 3/16" | Countersunk | 0000000 | 00000 | 000000 | 00 |
316 Stainless Steel—Polished | |||||||||||||||
| 2 11/16" | 1" | 3/16" | 1 3/16" | 11/32" | 1 1/16" | 1" | No | No. 8 | 4 | 3/16" | Countersunk | 000000 | 00000 | 000000 | 00 |
| 3 1/2" | 1 1/2" | 1/16" | 1 3/8" | 3/8" | 1 1/2" | 1 3/8" | Yes | No. 8 | 7 | 3/16" | Countersunk | 000000 | 00000 | 000000 | 00 |
| 4 1/2" | 1 1/2" | 1/16" | 1 3/8" | 3/8" | 1 1/2" | 1 3/8" | Yes | No. 8 | 7 | 3/16" | Countersunk | 000000 | 00000 | 000000 | 00 |
| 6" | 2" | 1/16" | 1 3/8" | 3/8" | 1 1/2" | 1 13/16" | Yes | No. 8 | 7 | 1/4" | Countersunk | 000000 | 00000 | 000000 | 00 |
Padlockable Hasps
For technical drawings and 3-D models, click on a part number.
Hasps | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Arm | Strike Plate | Mounting | Mounting Holes | Replacement Strikes | ||||||||||||
| Lg. | Ht. | Thick. | Projection | For Max. Padlock Shackle Dia. | Lg. | Ht. | Fasteners Included | Screw Size | No. of | Dia. | Style | Each | Each | |||
Screw On | ||||||||||||||||
Zinc-Plated Steel—Dull | ||||||||||||||||
| A | 2 1/2" | 1" | 1/8" | 3/4" | 5/16" | 1 1/8" | 1" | Yes | No. 8 | 7 | 1/4" | Countersunk | 000000 | 00000 | 000000 | 00 |
| A | 3 1/4" | 1 1/2" | 1/8" | 1" | 3/8" | 1 5/8" | 1 3/8" | Yes | No. 8 | 7 | 1/4" | Countersunk | 000000 | 0000 | 000000 | 00000 |
| A | 4 1/2" | 1 1/2" | 1/8" | 1" | 3/8" | 1 5/8" | 1 3/8" | Yes | No. 8 | 7 | 1/4" | Countersunk | 000000 | 0000 | 000000 | 0000 |
| A | 6" | 1 3/4" | 1/8" | 1" | 3/8" | 1 5/8" | 1 3/8" | Yes | No. 8 | 7 | 1/4" | Countersunk | 000000 | 0000 | 000000 | 0000 |
| A | 7" | 2 1/2" | 3/16" | 1 1/2" | 3/4" | 2 1/4" | 1 7/8" | Yes | No. 10 | 7 | 5/16" | Countersunk | 0000000 | 00000 | 000000 | 0000 |
| B | 3 1/2" | 1 1/2" | 1/4" | 7/8" | 11/32" | 1 3/16" | 1 3/16" | Yes | No. 7 | 6 | 3/16" | Countersunk | 000000 | 0000 | 000000 | 00 |
| B | 4 1/2" | 1 13/16" | 5/16" | 1 1/8" | 1/2" | 1 3/16" | 1 3/16" | Yes | No. 8 | 6 | 3/16" | Countersunk | 000000 | 0000 | 000000 | 00 |
| B | 6" | 2 3/8" | 7/16" | 1 7/16" | 9/16" | 2 1/16" | 2 1/16" | Yes | No. 12 | 6 | 1/4" | Countersunk | 000000 | 00000 | 000000 | 00 |
Galvanized Steel—Dull | ||||||||||||||||
| A | 5 1/4" | 1 13/16" | 1/8" | 1 1/16" | 1/2" | 1 15/16" | 1 1/2" | Yes | No. 10 | 7 | 3/16" | Straight | 00000000 | 0000 | 000000 | 00 |
304 Stainless Steel—Dull | ||||||||||||||||
| A | 6" | 2" | 1/16" | 3/4" | 9/32" | 1 1/8" | 1 7/8" | No | No. 8 | 6 | 3/16" | Countersunk | 0000000 | 00000 | 000000 | 00 |
304 Stainless Steel—Polished | ||||||||||||||||
| A | 2 7/16" | 1 3/16" | 1/16" | 15/16" | 1/2" | 1 3/8" | 1 3/16" | No | No. 6 | 7 | 3/16" | Countersunk | 0000000 | 0000 | 000000 | 00 |
| A | 3 1/4" | 1 3/16" | 1/16" | 15/16" | 1/2" | 1 3/8" | 1 3/16" | No | No. 6 | 7 | 3/16" | Countersunk | 0000000 | 0000 | 000000 | 00 |
| C | 2 7/16" | 1" | 1/16" | 11/16" | 5/16" | 1 1/4" | 1 1/8" | No | No. 6 | 8 | 3/16" | Countersunk | 0000000 | 0000 | 000000 | 00 |
| C | 3 7/16" | 1" | 1/16" | 11/16" | 5/16" | 1 1/4" | 1 1/8" | No | No. 6 | 8 | 3/16" | Countersunk | 0000000 | 0000 | 000000 | 00 |
| C | 4 1/4" | 1" | 1/16" | 11/16" | 5/16" | 1 1/4" | 1 1/8" | No | No. 6 | 8 | 3/16" | Countersunk | 0000000 | 0000 | 000000 | 00 |
Aluminum—Dull | ||||||||||||||||
| A | 3 1/2" | 1 1/2" | 1/16" | 7/8" | 1/2" | 1 1/2" | 1 1/2" | No | No. 8 | 7 | 1/4" | Countersunk | 000000 | 00000 | 000000 | 00 |
Weld On | ||||||||||||||||
Steel—Dull | ||||||||||||||||
| D | 1 5/8" | 1" | 1/16" | 3/4" | 3/8" | 3/4" | 7/8" | __ | __ | __ | __ | __ | 0000000 | 0000 | 000000 | 00 |
| D | 1 7/8" | 1 1/8" | 1/16" | 3/4" | 3/8" | 3/4" | 7/8" | __ | __ | __ | __ | __ | 0000000 | 0000 | 000000 | 00 |
| D | 3 3/8" | 1 1/2" | 1/16" | 1 1/16" | 1/2" | 1 1/8" | 1 1/2" | __ | __ | __ | __ | __ | 0000000 | 0000 | 000000 | 00 |
316 Stainless Steel—Polished | ||||||||||||||||
| D | 3 1/2" | 1 1/2" | 1/8" | 13/16" | 3/8" | 1 1/2" | 1 1/2" | __ | __ | __ | __ | __ | 0000000 | 00000 | 000000 | 00 |
| D | 4 1/2" | 1 1/2" | 1/8" | 13/16" | 3/8" | 1 1/2" | 1 1/2" | __ | __ | __ | __ | __ | 0000000 | 00000 | 000000 | 00 |
| D | 6" | 2" | 1/8" | 13/16" | 3/8" | 1 1/2" | 1 1/2" | __ | __ | __ | __ | __ | 0000000 | 00000 | 000000 | 00 |
Padlockable Hasps for Cam Locks
Install this hasp over a cam lock and secure it with a padlock to increase security on cabinets and chests.
For technical drawings and 3-D models, click on a part number.
Arm | Strike Plate | Mounting Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Ht. | Thick. | Projection | For Max. Padlock Shackle Dia. | For Max. Cam Lock Head Dia. | Lg. | Ht. | Mounting Fasteners Included | Dia. | Style | Each | |
304 Stainless Steel—Dull | ||||||||||||
| 4 7/8" | 1 3/8" | 1/8" | 1 1/8" | 7/16" | 1 1/16" | 4 3/8" | 1 3/8" | Yes | 5/16" | Straight | 00000000 | 000000 |
Pry-Resistant Padlockable Hasps
These padlockable hasps have a thick, heavy arm to resist prying. The arm slides to extend for easy latching.
For technical drawings and 3-D models, click on a part number.
Arm | Strike Plate | Mounting | Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Ht. | Thick. | Extended Arm Lg. | Projection | For Max. Padlock Shackle Dia. | Lg. | Ht. | Fasteners Included | Screw Size | No. of | Dia. | Style | Each | |
Zinc-Plated Steel—Dull | ||||||||||||||
| 6 3/4" | 1 5/8" | 1/4" | 7 3/4" | 1" | 9/16" | 3" | 1 3/4" | Yes | No. 8 | 7 | 1/4" | Countersunk | 0000000 | 000000 |
Extra-Reach Padlockable Corner Hasps
Mount these hasps around complex curves, angles, and corners that other corner hasps can't reach.
For technical drawings and 3-D models, click on a part number.
Leaf Lg. | Arm | Strike Plate | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Leaves | 1 | 2 | 3 | 4 | Lg. | Ht. | Thick. | Projection | For Max. Padlock Shackle Dia. | Lg. | Ht. | Mounting Fasteners Included | No. of | Dia. | Style | Each | ||
Zinc-Plated Steel—Dull | ||||||||||||||||||
| A | 2 | 3 1/4" | 1 11/16" | __ | __ | 6 1/4" | 1 1/2" | 1/16" | 15/16" | 3/8" | 1 5/8" | 1 3/8" | Yes | 7 | 1/8" | Countersunk | 000000 | 00000 |
Chrome-Plated Steel—Polished | ||||||||||||||||||
| B | 2 | 3 5/16" | 2 3/4" | __ | __ | 6" | 1 13/16" | 3/8" | 1 1/16" | 15/32" | 1 1/2" | 1 5/8" | Yes | 8 | 3/16" | Countersunk | 0000000 | 00000 |
| C | 3 | 3 5/16" | 1 7/16" | 2 3/4" | __ | 7 3/4" | 1 13/16" | 3/8" | 1 1/16" | 15/32" | 1 1/2" | 1 5/8" | Yes | 8 | 3/16" | Countersunk | 0000000 | 00000 |
| D | 4 | 3 5/16" | 1 7/16" | 1 7/16" | 2 3/4" | 9" | 1 13/16" | 3/8" | 1 1/16" | 15/32" | 1 1/2" | 1 5/8" | Yes | 8 | 3/16" | Countersunk | 0000000 | 00000 |
Pry-Resistant Padlockable Corner Hasps
This padlockable hasp has a thick, heavy arm to resist prying.
For technical drawings and 3-D models, click on a part number.
Arm | Arm Mounting Plate | Strike Plate | Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Ht. | Thick. | Projection | For Max. Padlock Shackle Dia. | Lg. | Ht. | Lg. | Ht. | Mounting Fasteners Included | No. of | Dia. | Style | Each | |
Zinc-Plated Steel—Dull | ||||||||||||||
| 5 3/16" | 1 3/4" | 1/4" | 1" | 17/32" | 5 3/16" | 1 3/4" | 3" | 1 3/4" | Yes | 6 | 1/4" | Countersunk | 0000000 | 000000 |
Padlockable Corner Hasps
For technical drawings and 3-D models, click on a part number.
Arm | Arm Mounting Plate | Strike Plate | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Ht. | Thick. | Projection | For Max. Padlock Shackle Dia. | Ht. | Lg. | Lg. | Ht. | Mounting Fasteners Included | No. of | Dia. | Style | Each | ||
Zinc-Plated Steel—Dull | |||||||||||||||
| A | 2 7/16" | 1 1/8" | 1/8" | 3/4" | 5/16" | 1 1/8" | 2 7/8" | 1 1/8" | 1 1/16" | Yes | 7 | 3/16" | Countersunk | 0000000 | 00000 |
| A | 2 7/16" | 1 3/16" | 1/8" | 3/4" | 5/16" | 1 3/16" | 3 7/8" | 1 1/8" | 1 1/16" | Yes | 7 | 3/16" | Countersunk | 0000000 | 0000 |
| A | 3 15/16" | 1 9/16" | 1/8" | 7/8" | 7/16" | 1 9/16" | 5 7/8" | 1 5/8" | 1 3/8" | Yes | 7 | 1/4" | Countersunk | 0000000 | 0000 |
| B | 3 3/16" | 1 7/8" | 3/16" | 1 7/16" | 11/16" | 1 7/8" | 4 1/8" | 2 1/4" | 1 7/8" | Yes | 9 | 1/4" | Countersunk | 0000000 | 00000 |
Pry-Resistant Extra-Reach Padlockable Corner Hasps
Designed for use with cut-resistant padlocks, these hasps have a padlock shackle protector on the strike plate for added cut and pry resistance. Mount the hasps around complex curves, angles, and corners that other corner hasps can't reach.
For technical drawings and 3-D models, click on a part number.
Leaf Lg. | Arm | Strike Plate | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Leaves | 1 | 2 | Lg. | Ht. | Thick. | Projection | For Max. Padlock Shackle Dia. | Lg. | Ht. | Mounting Fasteners Included | No. of | Dia. | Style | Each | ||
304 Stainless Steel—Dull | ||||||||||||||||
| A | 1 | 4 3/4" | __ | 4 3/4" | 2 1/4" | 7/16" | 1 1/16" | 21/32" | 1 5/8" | 1 15/16" | Yes | 8 | 3/16" | Countersunk | 0000000 | 000000 |
| B | 2 | 4 3/4" | 2 3/4" | 7 1/2" | 2 1/4" | 7/16" | 1 1/16" | 21/32" | 1 5/8" | 1 15/16" | Yes | 8 | 3/16" | Countersunk | 0000000 | 00000 |
Keyed Hasps
Choose these hasps if you need hasps that each open with a different key.
For technical drawings and 3-D models, click on a part number.
Arm | Strike Plate | Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Lg. | Ht. | Thick. | Projection | Lg. | Ht. | No. of Wafers | Mounting Fasteners Included | No. of | Dia. | Style | Each | |
Chrome-Plated Steel—Polished | |||||||||||||
| A | 4 1/2" | 1 1/2" | 1/8" | 1 1/4" | 1 5/8" | 1 5/8" | 4 | Yes | 8 | 3/16" | Countersunk | 00000000 | 000000 |
304 Stainless Steel—Polished | |||||||||||||
| B | 2 3/4" | 1 1/4" | 1/16" | 3/4" | 1 11/16" | 1 3/16" | 4 | Yes | 7 | 3/16" | Countersunk | 00000000 | 00000 |
Keyed Alike Hasps
Choose this hasp if you need several hasps that open with the same key.
Arm | Strike Plate | Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Ht. | Thick. | Key Number | Projection | Lg. | Ht. | No. of Wafers | Mounting Fasteners Included | No. of | Dia. | Style | Each | |
Chrome-Plated Steel—Polished | |||||||||||||
| 4 1/2" | 1 5/8" | 1/16" | 620 | 1 1/4" | 1 5/8" | 1 5/8" | 5 | Yes | 7 | 3/16" | Countersunk | 00000000 | 000000 |
Hook-to-Hold Wall-Mount Door Holders
Latch your door to the wall for a secure hold.
Holders | Replacement Rubber Pads | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Finish | Material | Projection | Ht. | Mounting Hardware Included | Mounting Screw Size | Each | Pkg. Qty. | Pkg. | |||
| 1 | Polished Stainless Steel | 316 Stainless Steel | 2 1/2" | 2" | No | No. 6 | 00000000 | 000000 | 1 | 00000000 | 00000 |
| 1 | Polished Stainless Steel | 316 Stainless Steel | 4" | 2" | No | No. 6 | 00000000 | 00000 | 1 | 00000000 | 0000 |
| 2 | Polished Brass | Brass | 3 5/8" | 2 1/4" | Yes | __ | 000000 | 00000 | 6 | 0000000 | 0000 |
| 2 | Dull Bronze | Brass | 3 5/8" | 2 1/4" | Yes | __ | 000000 | 00000 | 6 | 0000000 | 0000 |
| 2 | Dull Chrome | Brass | 3 5/8" | 2 1/4" | Yes | __ | 000000 | 00000 | 6 | 0000000 | 0000 |
| 3 | Dull Bronze | Brass | 3 5/8" | 2 3/8" | Yes | __ | 000000 | 00000 | 6 | 000000 | 0000 |
| 3 | Dull Chrome | Brass | 3 5/8" | 2 3/8" | Yes | __ | 000000 | 00000 | 6 | 000000 | 0000 |
Trailer Door Holders
Commonly used on semi-trailer doors, these holders have a long hook that secures heavy doors in the open position.
| Mounting Location | Finish | Material | Projection | Ht. | Mounting Hardware Included | Mounting Screw Size | Each | |
| Wall | __ | Gray Plastic | 4" | 3" | No | No. 10 | 0000000 | 00000 |
| Wall | __ | Gray Plastic | 6" | 3" | No | No. 10 | 0000000 | 0000 |
| Wall | __ | Gray Plastic | 10" | 3" | No | No. 10 | 0000000 | 0000 |
| Wall | Dull Zinc | Steel | 4" | 3" | No | No. 10 | 0000000 | 0000 |
| Wall | Dull Zinc | Steel | 6" | 3" | No | No. 10 | 0000000 | 0000 |
| Wall | Polished Stainless Steel | 302 Stainless Steel | 4" | 3" | No | No. 10 | 0000000 | 0000 |
| Wall | Polished Stainless Steel | 302 Stainless Steel | 6" | 3" | No | No. 10 | 0000000 | 0000 |