Assemble DB and HD connectors to replace worn out connectors.

With a ferrite filter block surrounding their contacts, these connectors control and reduce the electromagnetic (EMI) and radio frequency (RFI) interference traveling through them.

Protect sensitive equipment from electromagnetic interference.

Install these connectors in a panel cutout to create a port for transferring data.

Protect equipment from electromagnetic interference.

Protect sensitive equipment from electromagnetic interference.

Two-thirds the size of M12 connectors, these connectors fit into tight spaces and shield against signal interference.

These connectors allow you to connect USB devices to a circuit board.

Pull wires all the way through the connector face, and then use the crimper to cut and crimp wires in one step.

Designed to withstand washdown and outdoor environments, these connectors have a seal to block out water and debris.

These D- and X-coded M12 connectors are designed for high-speed Ethernet cable.

Connect two fiber-optic cords that have the same gender and fiber-optic connection type.

Connect two fiber-optic cords that have the same gender and connection type. These adapters mount to panels of any thickness, as long as you drill a mounting hole first.

Join two Ethernet cords—these adapters have an RJ45 female connection on both ends.

Protect sensitive equipment from electromagnetic interference.

Connect additional USB ports to your computer.

Transmit data between computers, connect two like cables, or connect devices that have different USB sizes or styles.

Extend the reach of USB devices.

Convert one HDMI size or style to another.

Adapt connections to attach cords to a computer.

Alter DVI, DisplayPort, and HDMI connections.

Create various configurations by snapping these adapters into the ports of keystone wall plates.

Join two devices with M8 connectors to a single cord, distribution block, or I/O module with M12 connectors to save space and reduce the number of cords in industrial automation setups. Often used with sensors and switches, these splitters send or receive two signals through one connection.

This cable has twisted pairs of wires that cancel signal interference from multiple transmission lines. Use it for complex and high-speed data and signal transmission.

Use this cable for complex and high-speed data and signal transmission.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.

Transmit data in rough industrial applications. This cable has an oil-resistant insulation.

Often used in radio transmission, network connections, and digital audio feed, this cable transmits audio, video, and data signals.

Connect telephones and telephone blocks to a wall jack.

The shielding blocks signal interference from nearby equipment and devices.

Use these unshielded cords where signal interference is not a concern.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout.

The plugs on these cords pivot up to 90° in each direction to fit Ethernet jacks at awkward angles or in tight spots, such as behind equipment or in enclosures.

The M12 threaded connectors on these cords are more vibration resistant than RJ45 connectors.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have an RJ45 plug on each end.

Connect computers, monitors, printers, and other devices with DB connections.

Display video from one source on two different monitors.

Transmit audio, video, and data signals over long distances with minimal signal loss.

Pinch the sides on the plugs of these cords to insert them; they lock into a socket to prevent the cord from detaching.

Make quick, secure connections between your development board and your system’s components, such as sensors and actuators.

The insulation serves as a tough armor that protects these cords in high-traffic areas.

Rated IP67, these cords withstand washdowns and temporary submersion. Connect them to a USB device inside an enclosure.

Replace the cords connecting your robot controller and teach pendant when they become worn, or switch them out for a different length.

Attach these caps to the socket end of washdown USB cords to maintain an IP67 rating when cords are not in use.

Often used in robotics, packaging, conveyors, and other applications with constant movement and high temperatures, these silicone rubber cords bend and flex at temperatures up to 325° F.

Securely connect equipment in data or signal applications. These cords have A- or B-coded plugs to meet the needs of your device.

With Kevlar-reinforced nylon armor and a high-strength aluminum connector, these USB cords stand up to frequent use and bending better than standard USB cords.

Filled with gel, these wire taps seal out moisture.

Pierce the insulation of wire without stripping it to make quick connections that are also sealed to keep out water.

Connect two devices to a distribution block or I/O module with just one cord. Often used with sensors and actuators, these splitters send power/signals to your devices through a single connection.

Send temperature readings directly to programmable logic controllers (PLCs)—with a built-in transmitter, these RTDs don’t require a separate signal converter. They’re threaded, so they’re ready to install into containers, tanks, and pipes.

To protect the probe from vibration, corrosion, and shock, these RTD probes come with a thermowell.

View temperature readings and adjust settings directly on these RTD probe transmitters.

Use these RTD probes for more stable air-temperature readings than thermocouple probes.

Check the temperature of liquids in hygienic applications such as food or pharmaceutical lines and tanks.

Convert thermocouple probe signals to a 4-20 mA signal for use with switches and controllers.

Monitor the temperature of hazardous, sensitive, and hard-to-reach surfaces without touching them.

Measure the temperature of liquids and gases without damaging the probe on these transmitters. An included thermowell shields the probe from vibration, corrosion, and shocks in tanks and pipes.

To withstand harsh environments, a protective head seals out dust and moisture and thick probe walls reduce wear on the sensing element.

For easy installation in thermowells, tanks, pipes, and other closed vessels, these thermocouples have an NPT male probe connection.

Designed for laboratory applications, these thermometers determine temperature within ±0.75° F accuracy.

For more accurate and consistent readings than thermometers with thermocouple probes and a longer service life, this thermometer has a resistance temperature detector (RTD) probe.

For use in food-processing applications, this thermometer meets NSF/ANSI standards and includes a thermocouple probe with a pointed tip to pierce dense meats and frozen foods.

Provide motion feedback to counters, controllers, and motor drives for automated motion control and measurement applications.

In addition to a transmitter, these kits include a 6 1/2-ft. cable and a mounting bracket.

Slide one of these transmitters onto a motor shaft in your application—they have a flexible mounting plate that compensates for shaft misalignment and vibration.

Send measurement data via Bluetooth to PCs, smartphones, and tablets.

Adapt 10-pin cables for connection to a USB port on a PC.

Connect measuring tools with SPC data output to miniprocessors and multiplexers.

Use these cables to connect measuring tools with SPC data output directly to a PC.

Wirelessly transmit data from measuring tools with SPC output to a PC.

These fluids meet Ford and General Motors (Dexron III) specifications for automatic transmission fluids. They can also be used as power steering fluid and compressor fluid.

High-frequency sound waves detect objects of all shapes and sizes—even when obscured by smoke, dust, or chips.

Scanning 275° side-to-side for people and objects, these switches (known as safety laser scanners) cover large areas and send signals to machinery to prevent accidents.

Rated IP69K, these switches can withstand high-pressure, high-temperature washdowns and temporary submersion.

Detect the presence or absence of an object moving at high speeds with a light beam. These switches have a longer sensing distance than proximity and ultrasonic switches.

Transmit a beam of light up to 225 ft. from the transmitter to the receiver.

Safely detect the presence or absence of an object moving at high speeds with a light beam. These switches produce a low-current, low-voltage NAMUR signal, so they won’t create sparks or ignite. ATEX and IECEx certified, they protect against explosion in environments containing flammable gases and combustible dust.

Set these switches to delay activation by up to fifteen seconds after detecting an object.

Set these controls to automatically adjust motor speed.

Rated NEMA 4, these controls are protected from washdowns.

Link industrial equipment with multiple computers to expand your data network.