Made of 316 stainless steel, these steam traps have excellent corrosion resistance. Also known as thermostatic steam traps, they increase the efficiency of your radiator by venting cool air. They open and close based on temperature. Use with convection heaters, drip lines, and risers. Steam traps should be installed with the outlet pointing down.

When close to steam temperature, these traps—also called thermodynamic steam traps—release condensate from steam lines to save energy in food, pharmaceutical, and other sanitary environments. Made of 316 stainless steel, they stand up to frequent washdowns with harsh cleaners and sanitizers to reduce the risk of bacteria growth. They have quick-clamp tube fittings and a threaded cap, which are easy to remove for cleaning or access to your line.

Often used while equipment is operating at high pressures and temperatures, these steam traps don’t have plastic or rubber seals that can degrade over time. The lack of seals, however, means they may not last as long as other steam traps. Install these steam traps horizontally.

For technical drawings and 3-D models, click on a part number.

Draw metal shavings and other contaminants out of your sanitary liquid line with these strainers. As liquid swirls through the strainer cavity, magnets sealed inside capture any metal bits. Remaining impurities are separated out with gravity and trapped in a collection sump. Empty the strainers by removing the lid and scooping up the collected particles at the bottom of the enclosure.

Made from 316 stainless steel, these strainers will not corrode from frequent washdowns with harsh cleaners. The continuous weld seams and polished surfaces are free of pits and crevices where bacteria could grow, making them easy to sanitize. These strainers are also rated for high temperatures, so you can keep them on your line during a heated clean-in-place (CIP) process. They are FDA compliant, meaning they are safe for food contact.

For frequent deep cleans and line changes, choose a strainer with quick clamp connections. Also known as tri-clamp fittings, they connect with a gasket, a clamp, and another quick-clamp fitting for quick removal and assembly. The included gaskets are FDA compliant.

To connect strainers with flanged connections to your line, bolt two same-size flanges together with a gasket (sold separately) in between.

Filters that are USDA certified meet the highest standards of sanitary design.