Clear All
For Tube OD For Tube OD |
|---|
Type Type | Show |
|---|
 | Clamp |
Clamp Type Clamp Type |
|---|
 |  |
| Wing Nut | Bolt |
 |  |
| Spring | Recessed Nut |
Material Material |
|---|
|
Connection Style Connection Style |
|---|
 |
| Quick Clamp |
For Tube Material For Tube Material |
|---|
|
Shape Shape |
|---|
 | Straight |
Nut Material Nut Material |
|---|
|
For Flange OD For Flange OD |
|---|
Connection Type Connection Type |
|---|
 | Tube |
Environment Environment |
|---|
Maximum Pressure Maximum Pressure |
|---|
For Tube Fabrication For Tube Fabrication |
|---|
|
Sterilize With Sterilize With |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Maximum Vacuum Maximum Vacuum |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Bolt Material Bolt Material |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Clamps for High-Polish Metal Quick-Clamp Sanitary Tube Fittings
- Temperature Range: See Gaskets or O-Rings
- Tubing:
Inch 304 Stainless Steel and Nylon Plastic: Use with welded 304/304L and 316/316L stainless steel that meets ASTM A269 or ASTM A270
Metric 304 Stainless Steel: Use with welded 304/304L and 316/316L stainless steel
Inch 316 Stainless Steel: Use with welded 304/304 L and 316/316L stainless steel
Metric 316 Stainless Steel: Use with welded 316/316L Stainless Steel
Connect quick-clamp sanitary tube fittings—also known as aseptic fittings—for a fast and easy way to access your line. Clamps with wing nut tighten by hand. Clamps with safety wing nut won’t release from minor loosening or jostling. They have a leak-before-burst design, which means they’ll leak to relieve pressure if the seal fails instead of bursting and causing a safety hazard.
Clamps with bolt tighten with a wrench. They handle higher pressures than wing-nut clamps for a stronger, more secure hold. Double-bolt clamps meet ASME design standards for pressure vessels.
Clamps with recessed nut require a hex socket adapter to loosen the nut, preventing the clamp from tampering and accidental removal. They have a hole for lockout (padlock not included) to block unauthorized access, helping you meet Hazard Analysis and Critical Control Point (HACCP) programs and Good Management Practices (GMP). Both of these security measures reduce the risk of product contamination. These clamps have a leak-before-burst design, so rather than burst dangerously if the seal fails, they’ll safely relieve pressure by dripping instead.
304 stainless steel clamps have very good corrosion resistance.
316 stainless steel clamps are more corrosion resistant than 304 stainless steel clamps. Clamps with two-pin hinge apply more even pressure on gaskets than other clamps, causing less wear and tear on gaskets.
Nylon clamps are lightweight compared to stainless steel clamps.
Clamps that meet DIN 11864 or DIN 32676 adhere to international standards for sanitary quick-clamp fittings.
For technical drawings and 3-D models, click on a part number.
Clamps
304 Stainless Steel with Wing Nut
304 Stainless Steel with Wing Nut, Spring Loaded
304 Stainless Steel with Bolt
316 Stainless Steel with Wing Nut
316 Stainless Steel with Wing Nut and 2-Pin Hinge
316 Stainless Steel with Safety Wing Nut and 2-Pin Hinge
316 Stainless Steel with Double Bolt
316 Stainless Steel with
Recessed Nut, Hole for
Lockout, and 2-Pin Hinge
Recessed Nut, Hole for
Lockout, and 2-Pin Hinge
White Nylon Plastic with Wing Nut
| For Tube OD | For Flange OD | Max. Pressure | Specifications Met | Each | |
304 Stainless Steel with Wing Nut | |||||
|---|---|---|---|---|---|
| 1/2", 3/4" | 0.984" | 1,200 psi @ 72° F | __ | 00000000 | 00000 |
| 1", 1 1/4", 1 1/2" | 1.984" | 500 psi @ 72° F | __ | 00000000 | 00000 |
| 2" | 2.516" | 450 psi @ 72° F | __ | 00000000 | 00000 |
| 2 1/2" | 3.047" | 400 psi @ 72° F | __ | 00000000 | 00000 |
| 3" | 3.579" | 350 psi @ 72° F | __ | 00000000 | 00000 |
| 4" | 4.682" | 200 psi @ 72° F | __ | 00000000 | 00000 |
| 6" | 6.57" | 150 psi @ 72° F | __ | 00000000 | 00000 |
| 8" | 8.57" | 100 psi @ 72° F | __ | 00000000 | 00000 |
| 10" | 10.57" | 40 psi @ 72° F | __ | 00000000 | 000000 |
| 12" | 12.695" | 30 psi @ 72° F | __ | 00000000 | 000000 |
| 10mm, 16mm, 20mm | 34mm | 90 psi @ 72° F | DIN 32676 | 0000000 | 00000 |
| 26mm, 32mm, 38mm | 51mm | 90 psi @ 72° F | DIN 32676 | 0000000 | 00000 |
| 50mm | 64mm | 50 psi @ 72° F | DIN 32676 | 0000000 | 00000 |
| 66mm | 91mm | 50 psi @ 72° F | DIN 32676 | 0000000 | 00000 |
| 81mm | 106mm | 30 psi @ 72° F | DIN 32676 | 0000000 | 00000 |
| 100mm | 119mm | 30 psi @ 72° F | DIN 32676 | 0000000 | 00000 |
| 125mm | 155mm | 30 psi @ 72° F | DIN 32676 | 0000000 | 000000 |
| 150mm | 183mm | 30 psi @ 72° F | DIN 32676 | 0000000 | 000000 |
304 Stainless Steel with Wing Nut, Spring Loaded | |||||
| 1/2", 3/4" | 0.984" | 1,200 psi @ 72° F | __ | 0000000 | 00000 |
| 1", 1 1/4", 1 1/2" | 1.984" | 500 psi @ 72° F | __ | 0000000 | 00000 |
| 2" | 2.516" | 450 psi @ 72° F | __ | 0000000 | 00000 |
| 2 1/2" | 3.047" | 400 psi @ 72° F | __ | 0000000 | 00000 |
| 3" | 3.579" | 350 psi @ 72° F | __ | 0000000 | 00000 |
| 4" | 4.682" | 200 psi @ 72° F | __ | 0000000 | 00000 |
304 Stainless Steel with Bolt | |||||
| 1/2", 3/4" | 0.984" | 1,500 psi @ 72° F | __ | 00000000 | 00000 |
| 1", 1 1/4", 1 1/2" | 1.984" | 1,500 psi @ 72° F | __ | 00000000 | 00000 |
| 2" | 2.516" | 1,000 psi @ 72° F | __ | 00000000 | 00000 |
| 2 1/2" | 3.047" | 1,000 psi @ 72° F | __ | 00000000 | 00000 |
| 3" | 3.579" | 1,000 psi @ 72° F | __ | 00000000 | 00000 |
| 4" | 4.682" | 1,000 psi @ 72° F | __ | 00000000 | 00000 |
| 6" | 6.57" | 300 psi @ 72° F | __ | 00000000 | 00000 |
| 8" | 8 3/4" | 100 psi @ 72° F | __ | 00000000 | 000000 |
316 Stainless Steel with Wing Nut | |||||
| 10mm, 15mm | 34mm | 725 psi @ 300° F | DIN 11864 | 0000000 | 00000 |
| 20mm, 25mm | 50.5mm | 725 psi @ 300° F | DIN 11864 | 0000000 | 00000 |
| 32mm, 40mm | 64mm | 725 psi @ 300° F | DIN 11864 | 0000000 | 00000 |
| 50mm | 91mm | 580 psi @ 300° F | DIN 11864 | 0000000 | 00000 |
| 65mm | 106mm | 580 psi @ 300° F | DIN 11864 | 0000000 | 00000 |
| 80mm | 119mm | 500 psi @ 300° F | DIN 11864 | 0000000 | 000000 |
316 Stainless Steel with Wing Nut and 2-Pin Hinge | |||||
| 1/2", 3/4" | 0.984" | 700 psi @ 72° F | __ | 0000000 | 00000 |
| 1", 1 1/4", 1 1/2" | 1.984" | 700 psi @ 72° F | __ | 0000000 | 00000 |
| 2" | 2.516" | 700 psi @ 72° F | __ | 0000000 | 00000 |
| 2 1/2" | 3.047" | 700 psi @ 72° F | __ | 0000000 | 00000 |
| 3" | 3.579" | 580 psi @ 72° F | __ | 0000000 | 00000 |
| 4" | 4.682" | 500 psi @ 72° F | __ | 0000000 | 00000 |
| 6" | 6.57" | 430 psi @ 72° F | __ | 0000000 | 00000 |
| 8" | 8.57" | 290 psi @ 72° F | __ | 0000000 | 000000 |
| 10" | 10.57" | 230 psi @ 72° F | __ | 0000000 | 000000 |
| 12" | 12.695" | 140 psi @ 72° F | __ | 0000000 | 000000 |
316 Stainless Steel with Safety Wing Nut and 2-Pin Hinge | |||||
| 1/2", 3/4" | 0.984" | 720 psi @ 72° F | __ | 0000000 | 00000 |
| 1", 1 1/4", 1 1/2" | 1.984" | 720 psi @ 72° F | __ | 0000000 | 00000 |
| 2" | 2.516" | 720 psi @ 72° F | __ | 0000000 | 00000 |
| 3" | 3.579" | 580 psi @ 72° F | __ | 0000000 | 00000 |
| 4" | 4.682" | 500 psi @ 72° F | __ | 0000000 | 00000 |
| 6" | 6.57" | 430 psi @ 72° F | __ | 0000000 | 000000 |
316 Stainless Steel with Double Bolt | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 2,400 psi @ 72° F | ASME BPVC.VIII | 0000000 | 000000 |
| 2" | 2.516" | 1,300 psi @ 72° F | ASME BPVC.VIII | 0000000 | 000000 |
| 3" | 3.579" | 1,300 psi @ 72° F | ASME BPVC.VIII | 0000000 | 000000 |
| 4" | 4.682" | 820 psi @ 72° F | ASME BPVC.VIII | 0000000 | 000000 |
| 6" | 6.57" | 210 psi @ 72° F | ASME BPVC.VIII | 0000000 | 000000 |
| 8" | 8.57" | 140 psi @ 72° F | ASME BPVC.VIII | 0000000 | 000000 |
| 10" | 10.57" | 100 psi @ 72° F | ASME BPVC.VIII | 0000000 | 000000 |
316 Stainless Steel with Recessed Nut, Hole for Lockout, and 2-Pin Hinge | |||||
| 1/2", 3/4" | 0.984" | 720 psi @ 72° F | __ | 0000000 | 00000 |
| 1", 1 1/4", 1 1/2" | 1.984" | 720 psi @ 72° F | __ | 0000000 | 00000 |
| 2" | 2.516" | 720 psi @ 72° F | __ | 0000000 | 00000 |
| 3" | 3.579" | 580 psi @ 72° F | __ | 0000000 | 00000 |
| 4" | 4.682" | 500 psi @ 72° F | __ | 0000000 | 00000 |
| 6" | 6.57" | 430 psi @ 72° F | __ | 0000000 | 000000 |
White Nylon Plastic with Wing Nut | |||||
| 1/2", 3/4" | 0.984" | 150 psi @ 72° F | __ | 00000000 | 00000 |
| 1", 1 1/4", 1 1/2" | 1.984" | 150 psi @ 72° F | __ | 00000000 | 00000 |
| 2" | 2.516" | 150 psi @ 72° F | __ | 00000000 | 00000 |
| 2 1/2" | 3.047" | 150 psi @ 72° F | __ | 00000000 | 00000 |
| 3" | 3.579" | 150 psi @ 72° F | __ | 00000000 | 00000 |
| 4" | 4.682" | 150 psi @ 72° F | __ | 00000000 | 00000 |
| 6" | 6.57" | 150 psi @ 72° F | __ | 00000000 | 000000 |
| 8" | 8.57" | 150 psi @ 72° F | __ | 00000000 | 000000 |
Gaskets and O-Rings
The temperature rating of the fitting will vary depending on the gasket or O-ring material you choose. Buna-N is oil resistant. EPDM resists water and steam and works well in humid environments. Silicone withstands high temperatures. Fluoroelastomer stands up to fuel, oil, and acid condensates. PTFE withstands harsh chemicals, with the exception of molten alkali metal and elemental fluorine.
| For Tube OD | ID | OD | Thick. | Temp. Range, °F | Color | Specifications Met | Each | |
Gaskets | ||||||||
|---|---|---|---|---|---|---|---|---|
Buna-N Rubber | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000 |
| 2" | 1.900" | 2.520" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000 |
| 2 1/2" | 2.400" | 3.050" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3" | 2.900" | 3.580" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 6" | 5.820" | 6.510" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 8" | 7.780" | 8.670" | 0.205" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 10" | 9.770" | 10.660" | 0.205" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 12" | 11.730" | 12.660" | 0.205" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
EPDM Rubber | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2" | 1.900" | 2.520" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2 1/2" | 2.400" | 3.050" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3" | 2.900" | 3.580" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 6" | 5.820" | 6.670" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 8" | 7.780" | 8.670" | 0.205" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 10" | 9.770" | 10.660" | 0.205" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 12" | 11.730" | 12.660" | 0.205" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 10mm | 10.200mm | 34.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 0000 |
| 16mm | 16.200mm | 34.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 0000 |
| 20mm | 20.200mm | 34.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 0000 |
| 26mm | 26.200mm | 50.500mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 0000 |
| 32mm | 32.200mm | 50.500mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 0000 |
| 38mm | 38.200mm | 50.500mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 0000 |
| 50mm | 50.200mm | 64.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 0000 |
| 66mm | 66.200mm | 91.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 000000 | 00000 |
| 81mm | 81.200mm | 106.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 00000 |
| 100mm | 100.200mm | 119.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 00000 |
| 125mm | 125.200mm | 155.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 00000 |
| 150mm | 150.200mm | 183.000mm | 0.205" | -50° to 275° | Black | DIN 32676 | 0000000 | 00000 |
Silicone Rubber | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2" | 1.900" | 2.520" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2 1/2" | 2.400" | 3.050" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3" | 2.900" | 3.580" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 6" | 5.820" | 6.510" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 8" | 7.780" | 8.670" | 0.205" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 10" | 9.770" | 10.660" | 0.205" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 12" | 11.730" | 12.660" | 0.205" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
Fluoroelastomer Rubber | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2" | 1.900" | 2.520" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 2 1/2" | 2.400" | 3.050" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 3" | 2.900" | 3.580" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 6" | 5.820" | 6.510" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 8" | 7.780" | 8.670" | 0.205" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 10" | 9.770" | 10.660" | 0.205" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 12" | 11.730" | 12.660" | 0.205" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
PTFE Plastic | ||||||||
| 1/2" | 0.380" | 0.860" | 0.178" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
| 3/4" | 0.620" | 0.860" | 0.178" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
| 1" | 0.900" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
| 2" | 1.900" | 2.520" | 0.203" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
| 2 1/2" | 2.400" | 3.050" | 0.203" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
| 3" | 2.900" | 3.580" | 0.203" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 0000 |
| 6" | 5.820" | 6.510" | 0.203" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 00000 |
| 8" | 7.780" | 8.670" | 0.205" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 00000 |
| 10" | 9.770" | 10.660" | 0.205" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 000000 |
| 12" | 11.730" | 12.660" | 0.205" | -100° to 500° | White | 3-A Certified 20-27 | 00000000 | 000000 |
O-Rings | ||||||||
EPDM Rubber | ||||||||
| 10mm | 12.000mm | 19.000mm | __ | 32° to 280° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 20mm | 22.000mm | 29.000mm | __ | 32° to 280° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 32mm | 34.000mm | 44.000mm | __ | 32° to 280° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 65mm | 68.000mm | 78.000mm | __ | 32° to 280° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 80mm | 83.000mm | 93.000mm | __ | 32° to 280° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
Viton® Fluoroelastomer Rubber | ||||||||
| 10mm | 12.000mm | 19.000mm | __ | 32° to 300° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 20mm | 22.000mm | 29.000mm | __ | 32° to 300° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 32mm | 34.000mm | 44.000mm | __ | 32° to 300° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 65mm | 68.000mm | 78.000mm | __ | 32° to 300° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
| 80mm | 83.000mm | 93.000mm | __ | 32° to 300° | Black | 3-A Certified 18-00 | 0000000 | 00000 |
PTFE Plastic | ||||||||
| 10mm | 12.000mm | 19.000mm | __ | 32° to 280° | White | 3-A Certified 18-00 | 0000000 | 00000 |
| 20mm | 22.000mm | 29.000mm | __ | 32° to 280° | White | 3-A Certified 18-00 | 0000000 | 00000 |
| 32mm | 34.000mm | 44.000mm | __ | 32° to 280° | White | 3-A Certified 18-00 | 0000000 | 00000 |
| 65mm | 68.000mm | 78.000mm | __ | 32° to 280° | White | 3-A Certified 18-00 | 0000000 | 00000 |
Clamps for Extra-Support High-Polish Metal Quick-Clamp Sanitary Tube Fittings
- Temperature Range: -30° to 200° F
- Tubing: Use with welded 304/304L or 316/316L stainless steel that meets ASTM A269 or ASTM A270
Connect extra-support quick-clamp fittings for a fast and easy way to access your line. Clamps have a wing nut that tightens by hand. They are 304 stainless steel for very good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamps for Plastic Quick-Clamp Sanitary Fittings for Stainless Steel Tubing
- For Use With: Dairy, Water
- Temperature Range: -40° F to 170° F
- Tubing: Use with welded 304/304L or 316/316L stainless steel that meets ASTM A269 or ASTM A270
- Specifications Met: 3-A Certified 62-02, FDA Compliant 21 CFR 177.2510
For technical drawings and 3-D models, click on a part number.
Clamps for Quick-Clamp Fittings for Dairy
- Temperature Range: 0° to 140° F
- Tubing: Use with soft (Durometer 50A-65A) silicone rubber
- Specifications Met: FDA Compliant 21 CFR 177.1500, USP Class VI
Use these clamps with quick-clamp fittings to quickly connect and disconnect your line as needed.
For technical drawings and 3-D models, click on a part number.