Battery Connection Type Battery Connection Type |
|---|
 | Clamp |
 | Ring Terminal |
 | Two-Pin SAE Connector |
 | 12V Vehicle Plug |
 | Sheathed Alligator Clip |
 | North American Style Connector |
Charging Current Charging Current |
|---|
|
|
|
Battery Chemistry Battery Chemistry |
|---|
|
For Battery Capacity For Battery Capacity |
|---|
Battery Connection Cord Length Battery ConnectionCord Length |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Power Plug Type Power Plug Type |
|---|
|
Height Height |
|---|
|
|
|
Power Consumption Power Consumption |
|---|
For Lithium Type For Lithium Type |
|---|
|
Chargers for Large-Cell Batteries
A
B
C
D
E
After the battery is fully charged, these chargers continuously provide a low-level charge to maintain the battery without overcharging.
Style E have mounting holes to attach them directly to mobile equipment, such as lift tables and floor scrubbers—no need to lug your equipment to a charger to power it.
Chargers with reverse-polarity protection prevent sparks and short circuits if the connectors touch or if they're not connected properly to the battery.
Chargers that cannot be sold to the regions listed are restricted by local energy efficiency regulations.
Style A—For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries
A
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
Charge Status Indicator and Reverse-Polarity Protection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 1.2-200 | 1.25 | Clamp (18"), 5/16" ID Ring Terminal (18"), Two-Pin SAE Connector (6 ft.) | Two Prong | 6 | 120V AC | 2" | 7" | 3 3/4" | 00000000 | 000000 |
Style B—For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries
B
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
Charge Status Indicator and Reverse-Polarity Protection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 12-68 | 2, 10 | Clamp (7 ft.) | Two Prong | 7 | 120V AC | 7 3/4" | 10 1/2" | 3 3/4" | 000000 | 000000 |
| 12 | 13-100 | 20 | Clamp (6 ft.) | Three Prong | 6 | 120V AC | 11" | 8" | 6" | 000000 | 000000 |
Style B—For Wet-Cell Lead Acid Batteries
B
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
Charge Status Indicator and Reverse-Polarity Protection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 12-59 | 3, 6 | Clamp (7 ft.) | Two Prong | 7 | 120V AC | 7 3/8" | 10 1/4" | 3 1/4" | 0000000 | 000000 |
Style C—For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries
C
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Cannot Be Sold To | Each | |
Charge Status Indicator and Reverse-Polarity Protection | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 24 | 80-150 | 10 | Clamp (8 ft.) | Three Prong | 7 | 120V AC | 6 1/2" | 7" | 8" | CA, OR | 000000 | 0000000 |
| 24 | 150-350 | 25 | Clamp (8 ft.) | Three Prong | 7 | 120V AC | 8 1/2" | 10" | 9 1/2" | __ | 000000 | 000000 |
Style C—For Wet-Cell Lead Acid Batteries
C
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Cannot Be Sold To | Each | |
Charge Status Indicator and Reverse-Polarity Protection | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 12/24 | 80-150 | 10 | Clamp (6 ft.) | Three Prong | 8 | 120V AC | 6 1/2" | 7" | 8" | CA, OR | 0000000 | 0000000 |
| 12/24 | 150-350 | 25 | Clamp (6 ft.) | Three Prong | 8 | 120V AC | 8 1/2" | 10" | 9 1/2" | __ | 0000000 | 000000 |
Style C—For Lithium Ion (Li-Ion), Dry-Cell AGM Lead Acid, and For Wet-Cell Lead Acid Batteries
C
| For Lithium Type | For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Battery Connection Current | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Cannot Be Sold To | Each | |
Charge Status Indicator and Reverse-Polarity Protection | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lithium Iron Phosphate (LiFePO4) | 12/24 | 80-150 | 10 | Clamp (8 ft.) | __ | Three Prong | 8 | 120V AC | 6 1/2" | 7" | 8" | __ | 0000000 | 0000000 |
| Lithium Iron Phosphate (LiFePO4) | 12/24 | 150-350 | 25 | Clamp (8 ft.) | __ | Three Prong | 8 | 120V AC | 6 1/2" | 7" | 8" | __ | 0000000 | 000000 |
| Lithium Iron Phosphate (LiFePO4) | 24 | 150-350 | 25 | Clamp (8 ft.) | __ | Three Prong | 8 | 120V AC | 6 1/2" | 7" | 8" | __ | 0000000 | 000000 |
| Lithium Iron Phosphate (LiFePO4) | 24 | 500-800 | 60 | North American Style Connector (8 ft.) | 175A | Three Prong | 8 | 120V AC | 10" | 9 1/2" | 17 1/2" | CA, OR | 0000000 | 000000 |
| Lithium Iron Phosphate (LiFePO4) | 36 | 150-350 | 25 | North American Style Connector (8 ft.) | 175A | Three Prong | 8 | 120V AC | 8 1/2" | 10" | 9 1/2" | CA, OR | 0000000 | 000000 |
| Lithium Iron Phosphate (LiFePO4) | 36 | 500-800 | 60 | North American Style Connector (8 ft.) | 175A | Three Prong | 8 | 208V AC/230V AC | 10" | 9 1/2" | 17 1/2" | CA, OR | 0000000 | 000000 |
| Lithium Iron Phosphate (LiFePO4) | 48 | 150-350 | 25 | North American Style Connector (8 ft.) | 175A | Three Prong | 8 | 120V AC | 8 1/2" | 10" | 9 1/2" | CA, OR | 0000000 | 000000 |
| Lithium Iron Phosphate (LiFePO4) | 48 | 500-800 | 60 | North American Style Connector (8 ft.) | 175A | Three Prong | 8 | 208V AC/230V AC | 10" | 9 1/2" | 17 1/2" | CA, OR | 0000000 | 000000 |
Style D—For K2 Energy Lithium Ion (Li-Ion) Batteries
D
| Charger No. | For Battery No. | For Lithium Type | For Battery Voltage | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Cannot Be Sold To | Each | |
Charge Status Indicator | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| K2C12V4A03 | K2B12V7EB, K2B12V10EB, K2B12V19EB, K2B12VG27-2, K2B12VG27-3, K2B12VU1-1 | Lithium Iron Phosphate (LiFePO4) | 12 | 4 | Sheathed Alligator Clip (4 ft.) | Two Prong | 4 | 120V AC | 1 3/16" | 5 1/2" | 2 3/8" | CA | 000000 | 000000 |
| K2C24V2A03 | K2B24V10EB | Lithium Iron Phosphate (LiFePO4) | 24 | 2 | Sheathed Alligator Clip (4 ft.) | Two Prong | 4 | 120V AC | 1 3/16" | 5 1/2" | 2 3/8" | CA | 000000 | 00000 |
Style E—For Lithium Ion (Li-Ion), Dry-Cell AGM Lead Acid, and For Wet-Cell Lead Acid Batteries
E
Mounting Holes | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Lithium Type | For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | No. of | Dia. | Mounting Fasteners Included | Cannot Be Sold To | Each | |
Charge Status Indicator and Reverse-Polarity Protection | ||||||||||||||||
| Lithium Iron Phosphate (LiFePO4) | 12 | 150-350 | 25 | 3/8" Ring Terminal (8 ft.) | Three Prong | 8 | 120V AC | 6 1/2" | 6" | 9" | 4 | 3/8" | No | CA, OR | 0000000 | 0000000 |
| Lithium Iron Phosphate (LiFePO4) | 24 | 150-350 | 25 | 3/8" Ring Terminal (8 ft.) | Three Prong | 8 | 120V AC | 6 1/2" | 6" | 9" | 4 | 3/8" | No | __ | 0000000 | 000000 |
| Lithium Iron Phosphate (LiFePO4) | 36 | 150-350 | 25 | 3/8" Ring Terminal (8 ft.) | Three Prong | 8 | 120V AC | 6" | 9" | 7" | 4 | 3/8" | No | CA, OR | 0000000 | 000000 |
| Lithium Iron Phosphate (LiFePO4) | 48 | 150-350 | 25 | 3/8" Ring Terminal (8 ft.) | Three Prong | 8 | 120V AC | 6" | 9" | 8" | 4 | 3/8" | No | CA, OR | 0000000 | 000000 |
Water-Resistant Chargers for Large-Cell Batteries
A
B
C
D
Charge batteries even in wet environments—a sealed housing keeps water out. They have reverse-polarity protection to prevent sparks and short circuits if the ring terminals touch or if they're not connected properly to the battery. After the battery is fully charged, they continuously provide a low-level charge to maintain the battery without overcharging.
When used with lithium batteries, Style D chargers must match the battery’s lithium type.
Chargers that cannot be sold to California and Oregon are restricted by local energy efficiency regulations.
Style A—For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries
A
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Mounting Hole Dia. | Mounting Fasteners Included | Each | |
| 12/24 | 5-100 | 2.5, 5 | Two-Pin SAE Connector (4 ft.), 5/16" ID Ring Terminal (18") | Three Prong | 6 | 120V AC | 5 1/8" | 8 7/8" | 2" | 3/8" | No | 00000000 | 0000000 |
Style B—For Wet-Cell Lead Acid Batteries
B
Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | No. of | Dia. | Mounting Fasteners Included | Cannot Be Sold To | Each | |
| 12 | 150-350 | 25 | 3/8" ID Ring Terminal (6 ft.) | Three Prong | 2 | 120V AC | 6 1/2" | 6" | 9" | 4 | 3/8" | No | CA, OR | 0000000 | 0000000 |
| 24 | 150-350 | 25 | 3/8" ID Ring Terminal (6 ft.) | Three Prong | 2 | 120V AC | 6 1/2" | 6" | 9" | 4 | 3/8" | No | __ | 0000000 | 000000 |
Style C—For Wet-Cell Lead Acid Batteries
C
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
| 12 | 72 | 6 | Clamp (4 ft.) | Three Prong | 6 | 120V AC | 3 1/2" | 5" | 2 3/8" | 0000000 | 0000000 |
Style D—For Lithium Ion (Li-Ion), Dry-Cell AGM Lead Acid, and Wet-Cell Lead Acid Batteries
D
Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Lithium Type | For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | No. of | Dia. | Mounting Fasteners Included | Each | |
| Lithium Cobalt Oxide (LiCoO2), Lithium Iron Phosphate (LiFePO4), Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 or NMC) | 24 | 55-425 | 40 | 3/8" ID Ring Terminal (6 ft.) | Three Prong | 6 | 120V AC | 3 7/8" | 8 1/2" | 12" | 4 | 5/16" | No | 0000000 | 0000000 |
| Lithium Cobalt Oxide (LiCoO2), Lithium Iron Phosphate (LiFePO4), Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 or NMC) | 36 | 55-425 | 26 | 3/8" ID Ring Terminal (6 ft.) | Three Prong | 6 | 120V AC | 3 7/8" | 8 1/2" | 12" | 4 | 5/16" | No | 0000000 | 000000 |
| Lithium Cobalt Oxide (LiCoO2), Lithium Iron Phosphate (LiFePO4), Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 or NMC) | 48 | 55-425 | 20 | 3/8" ID Ring Terminal (6 ft.) | Three Prong | 6 | 120V AC | 3 7/8" | 8 1/2" | 12" | 4 | 5/16" | No | 0000000 | 000000 |
Solar Panel Chargers for Large-Cell Batteries
Rigid
Flexible
Keep batteries charged even when electricity is unavailable. These chargers can be used in any battery capacity range.
Automatic chargers continuously provide a low-level charge to maintain the battery without overcharging.
Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Output Wattage, W | Battery Connection Type (Cord Lg.) | No. of | Dia. | Mounting Fasteners Included | Includes | Backing Material | Ht. | Wd. | Dp. | Each | |
Rigid | ||||||||||||||
Automatic Chargers for Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | ||||||||||||||
| 12 | __ | 0.2 | 2.4 | Clamp (108"), 12V Vehicle Plug (108") | 4 | 0.11" | Yes | __ | __ | 19 3/8" | 10 1/4" | 1 3/8" | 00000000 | 000000 |
| 12 | __ | 0.4 | 4.8 | Clamp (132"), 12V Vehicle Plug (132") | 4 | 0.11" | Yes | __ | __ | 17 1/4" | 15" | 2 3/4" | 00000000 | 00000 |
Flexible | ||||||||||||||
Manual Chargers for Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | ||||||||||||||
| 12 | 2-50 | 0.45 | 7 | 5/16" ID Ring Terminal (15ft.), 3/8" ID Ring Terminal (15ft.) | 4 | 3/8" | No | 3-ft. Cord with 12V Vehicle Socket | Vinyl Plastic | 23" | 14 1/2" | 3/64" | 0000000 | 000000 |
| 12 | 5-100 | 0.9 | 14 | 5/16" ID Ring Terminal (15ft.), 3/8" ID Ring Terminal (15ft.) | 4 | 3/8" | No | 3-ft. Cord with 12V Vehicle Socket | Vinyl Plastic | 42" | 14 1/2" | 3/64" | 0000000 | 000000 |
| 5-ft. Power Cord with 12V Vehicle Plug for Flexible Chargers | 0000000 | Each | 000000 |
Power Cords for Large-Cell Battery Solar Panel Chargers
Connect a flexible solar panel charger to a vehicle outlet to charge the vehicle’s battery.
| Manufacturer | Manufacturer Model No. | Battery Connection Type | Battery Connection Cord Lg., ft. | Each | |
| PowerFilm | RA-1 | 12V Vehicle Plug | 5 | 0000000 | 000000 |
Multiple-Battery Stationary
Chargers for Large-Cell Batteries
Charge up to eight batteries at once. After the battery is fully charged, these chargers continuously provide a low-level charge to maintain the battery without overcharging.
| For Battery Voltage | For No. of Batteries | For Battery Cap. Range, amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Features | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 8 | 24/44-75 | 2-12 | Clamp (6 ft.) | Charge Status Indicator | Three Prong | 9 | 120V AC | 12 1/8" | 19 1/8" | 12" | 0000000 | 0000000 |
Hand-Held Charger/Starters for Large-Cell Batteries
Small enough to carry, these charger/starters provide a 125-amp starting current. They have reverse-polarity protection to prevent sparks and short circuits if the clamps touch or if they're not connected properly to the battery. After the battery is fully charged, they continuously provide a low-level charge to maintain the battery without overcharging.
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Starting Current, A | Battery Connection Type (Cord Lg.) | Features | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6/12 | 12-150 | 6/15-40 | 125 | Clamp (12 ft.) | Charge Status Indicator, Reverse-Polarity Protection | Two Prong | 6 | 120V AC | 13" | 10 1/2" | 11 5/8" | 0000000 | 0000000 |
Charger/Starters for Large-Cell Batteries
Wheel these charger/starters to batteries that need maintenance. They provide higher starting currents than Hand-Held Charger/Starters for Large-Cell Batteries. All have reverse-polarity protection to prevent sparks and short circuits if the clamps touch or if they're not connected properly to the battery.
Automatic charger/starters turn off when the battery is fully charged, but will continue to monitor the battery and turn back on if voltage drops.
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Starting Current, A | Battery Connection Type (Cord Lg.) | Features | Wheel Material | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
Automatic | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Dry-Cell AGM Lead Acid and Wet-Cell Lead Acid Batteries | ||||||||||||||
| 12 | 13-120 | 45 | 130 | Clamp (6 ft.) | Power Supply, Ammeter, Reverse-Polarity Protection | Rubber | Three Prong | 6 | 120V AC | 33" | 12" | 12" | 000000 | 0000000 |
Stationary Chargers for Large-Cell Batteries
Bring batteries to these chargers for maintenance. To prevent overcharging, they automatically shut off when battery is fully charged.
| For Battery Voltage | For Battery Cap., amp-hrs. | Charging Current, A | Battery Connection Type (Cord Lg.) | Features | Power Plug Type | Power Cord Lg., ft. | Input Voltage | Ht. | Wd. | Dp. | Each | |
For Wet-Cell Lead Acid Batteries | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 12 | 240-300 | 30 | 175-amp North American Style Connector (8 ft.) | Charge Status Indicator, Ammeter | Three Prong | 7 | 120V AC | 12 3/16" | 7 1/2" | 5 1/2" | 0000000 | 0000000 |
| 24 | 240-300 | 30 | 175-amp North American Style Connector (8 ft.) | Charge Status Indicator, Ammeter | Three Prong | 7 | 120V AC | 12 3/16" | 7 1/2" | 5 1/2" | 0000000 | 000000 |
| 36 | 160-200 | 25 | 175-amp North American Style Connector (8 ft.) | Charge Status Indicator, Ammeter | Three Prong | 7 | 120V AC | 12 3/16" | 7 1/2" | 5 1/2" | 0000000 | 000000 |
Battery Chargers
Chargers cannot be sold to Canada due to import regulations.
For Nickel Cadmium (NiCad) and Nickel Metal Hydride (NiMH) Batteries
Charger for NiCad and NiMH Batteries
For No. of Batteries | ||||||||
|---|---|---|---|---|---|---|---|---|
| AA, AAA, C, D | 9V | Charging Time, hrs. | Input Voltage | Plug Type | Cord Lg., ft. | Cannot Be Sold To | Each | |
| 4 | 1 | 2-10 | 120V AC | Two Prong | 6 | Canada | 0000000 | 000000 |