Brighten areas of a jobsite with these floodlights, and move them at a moment’s notice. To choose your perfect light position, raise the mast up and down, then rotate and tilt the head. Ideal for tough jobsites, their polycarbonate lens resists impact. A battery life indicator lets you know when to recharge. You can still use them when they’re charging. They also have a 12V socket, also known as a vehicle outlet, to plug devices in and charge them. Adjust the light output using the keypad.

Style A have a handle and shoulder strap for easy transport.

Style B have two heads for double the brightness of Style A. These floodlights come with a USB adapter to charge up to two phones. With wheels and a retractable handle, you can move these floodlights around like a suitcase.

Brighten remote spaces with the DeWalt rechargeable battery that’s already in your toolkit. These floodlights extend up to 7 ft., and the light head turns at any angle to aim light where it’s needed. When you're done using them, fold them up. They have a handle for easy transport.

Built for tough jobsites, these floodlights have an impact-resistant plastic lens. And rated IP55, they’re sealed against humidity and low-pressure washdowns, so they’re good to use outside and in other damp areas. They’re also protected against dirty, dusty conditions.

Note: Battery life depends on the size of your battery.

Brighten remote areas, even if they’re damp or rainy. These floodlights are IP rated to keep out humidity and dripping, splashing, and falling liquids. Lightweight, you can move them elsewhere at a moment’s notice.

Style A can be hung or propped up like a picture frame with their handle. Adjust from a focused spot beam to a wide flood beam by twisting the light head. Rated IP54, these floodlights also seal out dusty conditions. Their high-capacity battery lets you plug your phone or other device in to charge while you’re working. And when you plug these lights in to charge, they’ll still produce light. The battery life indicator will let you know when to recharge.

Style B are made with tough jobsites in mind. For impact resistance, they’re cushioned with rubber at the edges and have a tempered-glass lens. You can drop them from up to 6 feet without damage. Rated IP67, they’re dust-tight and will still work if temporarily submerged under water. Adjust them to any angle to aim light exactly where you need it. To mount, hang them up with the extendable hook or stick the magnetic base to a metal surface. If there’s no surface to mount them on, add a tripod (sold separately).

Style C are the best at showing slight color differences. Originally used by evidence technicians, they’re great for inspecting paint or similarly colored wires. Light up something nearby or far away by adjusting the diffuser lens from a flood beam to a spot beam. Rated IP07, these floodlights will still work even if they’re temporarily submerged. They also have the best battery life, offering up to a full day of lighting. For unlimited operation, use the included adapters to plug them into a standard outlet or a 12V power source, such as a truck. They also come with a remote that lets you control them from up to 20 feet away. To mount, hang them like a lantern with the loop on top or stick them to a metal surface with the magnetic base. If you don’t have a surface to work with, add a tripod (sold separately).

Floodlights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Bring light to remote areas with the DeWalt rechargeable battery that's already in your toolkit. Built for tough jobsites, their plastic lens resists impact.

Style A have a handle that props them up. It fully rotates so you can aim the light beam where it’s needed.

IP54-rated floodlights are sealed against humidity and splashing and falling liquids, so they’re good for the outdoors and other damp spaces. They’re also protected against dirty, dusty conditions.

Note: Battery life depends on the size of your battery.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction. The head pivots to aim light where you need it. You can also hang the hooked feet over doors, scaffolding, and other surfaces. With an alloy steel frame and an impact-resistant plastic lens, these lights are built for tough jobsites. Still, they’re lightweight enough to carry around. You can use them outdoors and in other damp locations—rated IP07, they can even handle temporary submersion. A digital display shows you how much charge is left at the brightness level you’re using.

Compact and easy to carry, these ETL listed lights stand up to dripping, splashing, and falling liquids. The head adjusts up and down to direct light where it's needed. Their LEDs cast a cool light that highlights white and blue tones, which is good for inspecting.

Style A have a durable tempered-glass lens to protect the LEDs. For easy carrying, you can fold the frame flat.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers. Intrinsically safe, they’re designed not to create enough heat or sparks to trigger an explosion.

They’re durable enough to fall from 6 ft. and still work. The polycarbonate lens resists impact, and the sturdy steel body has rubber cushioning on the edges. Rated IP67, they’re completely dust tight and can be submerged in water and still work. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Set these cordless lights up on the included tripod or mount them using the hook on the back or the magnet on the base. You can set these lights up quickly and move them elsewhere at a moment’s notice. The hook makes it easy to carry them around your jobsite and the carrying case fits both the light and the tripod.

The handle opens into a tripod, so you can shine light on your work while keeping your hands free. The head on these flashlights tilts 120°, which allows you to direct the beam exactly where it's needed. When the tripod is closed, they can be carried like a standard flashlight. These flashlights have long-lasting, built-in LEDs that are more efficient and generate less heat than other light technologies. Good for close-up tasks and inspection work, these flashlights cast a flood beam to evenly distribute light.

Free your hands for other work by mounting a flashlight (not included) to a nearby surface.

Clamp-on mounts hug table edges and other surfaces up to 2" thick. Tighten them as needed for a secure hold.

Clip-on mounts grab onto surfaces with a mounting clip, so they’re easy to move around your workspace.

Magnetic mounts quickly snap onto metal surfaces, making them easy to place, remove, and reinstall.