A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors.

Use these latches alone for single-point latching, or add latch kits for more holding power.

The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.

Use these latches alone for single-point latching or add latch kits for multiple-point latching and extra holding power.

Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors.

A safety catch prevents accidental opening.

These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.

A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

To prevent accidental opening, these latches have a safety catch.

These latches are typically used to secure hoods and covers.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

The latch arm is coated with vinyl so it won't scratch surfaces.

A safety catch prevents accidental opening.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

Use these L-handle latches to draw lightweight surfaces together.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.

Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.

For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

Adjust the latching distance to compensate for gasketing and misalignment.

For use on gasketed doors, these latches use downward compression to pull surfaces together.

Lift and turn the handle 180° to open and close this lock.

Designed to stand up to heavy use, these latches are often seen on refrigerators and truck doors.

These padlockable hasps have a thick, heavy arm to resist prying.

Install these hasps over a cam lock and secure them with a padlock to increase security on cabinets and chests.

These padlockable hasps have a thick, heavy arm to resist prying.

Designed for use with cut-resistant padlocks, these hasps have a padlock shackle protector on the strike plate for added cut and pry resistance.

Choose these hasps if you need hasps that each open with a different key.

These strikes fit most deadbolt-style locks.

These drawer locks open with their own keys and with a master key.

To provide more security than other master keyed deadbolt cabinet door locks, these locks have thicker bodies and longer bolts to resist prying.

Choose these locks to use your own compatible lock cylinder to match the keying of an existing system.

Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.