Wheel Bearing Locknut Socket Sets
 Plastic Case |  4-Pin |
 6-Pin | |
 6-Point | |
 6-Point Rounded |
Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts. They ensure the proper torque setting when you reinstall a locknut on your wheel, so you know it's safe and secure. These are square drive sockets for use with hand-driven tools, not impact wrenches. Made of steel, they grip locknuts tightly and prevent rounding.
4-pin and 6-pin sockets fit around retaining locknuts with slots or holes in the side. Also known as spanner sockets, they’re similar to tri-groove sockets but have four or six pins instead of three.
Spindle puller adapters remove the front spindle on four-wheel drive trucks so you can access the needle bearing when lubricating and aligning the front wheels.
6-point sockets are designed for use with hex locknuts.
6-point rounded sockets fit the special rounded hex nuts found on some trucks.
Carry sets with a plastic case from one location to the next.
| Number of Pieces | Components Included | Includes | Container Type | Each | |
1/2" Square Drive—Chrome-Plated Steel | |||||
|---|---|---|---|---|---|
| 6 | 5 Sockets 1 Adapter | 4-Pin: 2", 2 1/4", 2 3/4" 6-Pin: 2 1/4" Spindle Puller Adapter | Plastic Case | 000000000 | 0000000 |
| 7 | 7 Sockets | 6-Point: 2 3/8", 2 1/2", 55 mm 6-Point Rounded: 2 3/8", 2 1/2", 2 9/16", 2 3/4" | Plastic Case | 000000000 | 000000 |
Nonmarring 6-Point Impact Socket Sets
Tighten or loosen nuts and bolts without damaging the finish. The tough steel core of the socket withstands the high torque of impact tools, but the insert and outer sleeve are made of plastic, which won’t scratch chrome plating and other coatings. The hex shape achieves the best possible grip on hex fasteners to prevent rounding their points.
| No. of Pieces | Components Included | Includes | Insert Material | Sleeve Material | Container Type | Each | |
1/2" Square Drive—Steel | |||||||
|---|---|---|---|---|---|---|---|
| 9 | 9 Sockets | Deep Sockets (Inch): 3/4", 13/16", 7/8", 15/16", 1", 1 1/16" Deep Sockets (Metric): 17 mm, 19 mm, 21 mm | Plastic | Plastic | Plastic Case | 00000000 | 0000000 |
Budd Wheel Impact Socket Sets
 Budd Wheel Impact Socket Set |  4-Point Socket Shape |  6-Point Socket Shape | ||||
 Socket Retaining Ring | ||||||
Remove and install dual wheels on trucks and trailers with the sockets in these sets. The sockets are extra deep for use with Budd wheels, so you can remove both the nut and the stud with a single socket. Sets include sockets for hex drives to access lug nuts and sockets for square drives to turn the threaded shafts on inner wheels. All are impact sockets, made to withstand the high torque and force of impact tools. Use them with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring-style socket retainer.
For technical drawings and 3-D models, click on a part number.
6-Point Lug Nut-Holding Impact Sockets
Move from lug nut to lug nut with the speed of a racecar pit crew. Up to five standard 6-point lug nuts stack up in the shank of these sockets, so you don’t have to stop to take the lug nuts out of the socket. With thicker walls and more give than standard sockets, these sockets can withstand the high torque and force of impact tools.
For technical drawings and 3-D models, click on a part number.
Clearance Depth | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | OD | Nut | Bolt | Bolt Clearance Style | Material | Finish | Each | |
1/2" Square Drive | |||||||||
| 3/4" | 5 1/4" | 1 1/8" | 4 29/64" | 4 3/4" | Extra Deep | Steel | Zinc Plated | 000000000 | 000000 |
Budd Wheel Impact Sockets
Remove and install dual wheels on trucks and trailers—these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels. They are made to withstand the high torque and force of impact tools.
Sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
For technical drawings and 3-D models, click on a part number.
Sockets | Retaining Rings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Square Recess Size | Overall Lg. | OD | Compatible Retaining Ring ID | Bolt Clearance Style | Material | Finish | Each | Each | ||
Inch | |||||||||||
3/4" Square Drive | |||||||||||
| 1 1/2" | 13/16" | 4" | 2 1/4" | 1 5/8" | Deep | Steel | Black Oxide | 0000000 | 000000 | 0000000 | 00000 |
1" Square Drive | |||||||||||
| 1 1/2" | 13/16" | 3 15/16" | 2 1/4" | 2" | Deep | Steel | Zinc-Phosphate Coated | 000000000 | 00000 | 00000000 | 0000 |
Metric | |||||||||||
1" Square Drive | |||||||||||
| 35 mm | 17mm | 3 3/4" | 2 9/64" | 2" | Deep | Steel | Zinc-Phosphate Coated | 000000000 | 00000 | 00000000 | 0000 |
| 38 mm | 20mm | 3 13/16" | 2 13/64" | 2" | Deep | Steel | Zinc-Phosphate Coated | 000000000 | 00000 | 00000000 | 0000 |
| 41 mm | 21mm | 3 15/16" | 2 45/64" | 2" | Deep | Steel | Zinc-Phosphate Coated | 000000000 | 00000 | 00000000 | 0000 |
8-Point Sockets
Quickly position these sockets on square and external 8-point fasteners.
3/4" square drive size sockets work with wheel bearing locknuts on trucks and trailers.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | OD | Material | Each | |
3/4" Square Drive | |||||
|---|---|---|---|---|---|
| 2 3/8" | 3 1/2" | 2 45/64" | Steel | 000000000 | 000000 |
| 2 9/16" | 3 1/2" | 2 59/64" | Steel | 000000000 | 00000 |
| 2 3/4" | 3 1/2" | 3 13/64" | Steel | 000000000 | 00000 |
| 2 7/8" | 3 1/2" | 3 9/32" | Steel | 000000000 | 00000 |
| 3" | 3 1/2" | 3 31/64" | Steel | 000000000 | 00000 |
| 3 1/8" | 3 1/2" | 3 39/64" | Steel | 000000000 | 00000 |
| 3 1/4" | 3 1/2" | 3 45/64" | Steel | 000000000 | 00000 |
| 3 1/2" | 3 1/2" | 3 63/64" | Steel | 000000000 | 00000 |
| 3 3/4" | 3 1/2" | 4 17/64" | Steel | 000000000 | 00000 |
| 3 7/8" | 3 1/2" | 4 27/64" | Steel | 000000000 | 00000 |
| 4 3/8" | 3 1/2" | 4 63/64" | Steel | 000000000 | 00000 |
| 4 1/2" | 3 1/2" | 5 1/8" | Steel | 000000000 | 00000 |
| 4 7/8" | 3 1/2" | 5 35/64" | Steel | 000000000 | 00000 |
| 94 mm | 3 1/2" | 4 7/32" | Steel | 000000000 | 00000 |
| 100 mm | 3 1/2" | 4 31/64" | Steel | 000000000 | 00000 |