A small swing radius lets you cut tubing in tight spaces. All have an enclosed adjustment screw to prevent damage from chips and debris.

Cutters with grooved rollers give clearance for cutting flared tube ends with little material loss.

Tighten the knob just once on cutters with an autofeed cutter wheel, and the wheel will automatically cut through the rest of the tubing.

Attach ratchet handles to cutters to control tube cutting in 10-degree increments. Use them to make precise cuts, even in tight spaces where hands don’t fit comfortably.

An enclosed ratchet feed opens quickly to accept tubing and instantly slides to cutting position. These cutters have grooved rollers for clearance to cut flared tube ends with little material loss. The adjustment screw is enclosed to prevent damage from chips and debris.

This cutter has two sets of guide wheels that ride in the corrugations for stability so you get clean, precise cuts.

Rollers have a groove that provides clearance to cut flared tube ends with little material loss.

Enclosed adjustment screw prevents damage from chips and debris.

After cutting, crimp tubing in preparation for making connections. Rollers have a groove for clearance to cut flared tube ends with little material loss. An enclosed adjustment screw prevents damage from chips and debris.

For smooth cuts and trouble-free operation, these cutters have enclosed steel bearings. All have grooved rollers for clearance to cut flared tube ends with little material loss. They have an enclosed adjustment screw to prevent damage from chips and debris.

Made of materials that are FM approved, these cutters satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. They're also nonmagnetic.

Warning: Do not use these tools in direct contact with acetylene.

Ratchet action permits cutting in cramped areas.

A spring-loaded cutting wheel tightens as you spin these cutters around tubing without a handle to get in your way.

Ratcheting handle provides extra leverage.

An insulated handle protects against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. They have grooved rollers that provide clearance to cut flared tube ends with little material loss.

Ratchet action moves the cutter 360° around a pipe with only 10° of handle swing.

Turn this cutter 360° around a pipe to make a cut.

Make cuts in most rigid plastic tubing. Rollers have a groove for clearance to cut flared tube ends with little material loss. An enclosed adjustment screw prevents damage from chips and debris.

A fast-acting release lever opens the cutter to maximum size. Push the handle to quickly slide the cutting wheel onto the pipe. To cut CPVC and PVC, use optional Reed CPVC and PVC cutting wheels.