Use these clamps with quick-clamp fittings for dairy to quickly connect and disconnect your line as needed.

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Connect quick-clamp sanitary tube fittings—also known as aseptic fittings—for a fast and easy way to access your line.

Connect extra-support quick-clamp fittings for a fast and easy way to access your line.

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

Use these rings with quick-clamp high-vacuum fittings.

Create access points in ultra-high-vacuum lines or chambers by bolting two same-size flanges together with a copper gasket between them. The flanges’ sharp edges dig into the copper gasket and form an extremely tight seal, which means they handle higher vacuum pressures than other high-vacuum fittings with rubber gaskets.

Use these nuts with a sleeve and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°.

Use these fittings in an air vacuum system to avoid the hassle of brazing and welding. Insert two fittings into a clamp and tighten to form a secure seal in steel tubing.

For use in high-vacuum systems, these fittings use a metal reinforced O-ring to create an airtight seal. Also known as KF, QF, and NW fittings, they’re used for high-vacuum applications such as vacuum coating and heat treating, leak testing, and analyzing gases.

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

These fittings are an economical option for chemical waste systems. Fittings are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

To maintain sanitary standards in food, beverage, and dairy systems that require frequent cleaning, these valves are made of FDA compliant materials. Polished to a 32 Ra finish, they have smooth internal surfaces that prevent product buildup and inhibit bacteria growth. All have sanitary quick-clamp fittings for easy disassembly.

3-A certified as meeting sanitary design standards, these valves control the flow of liquids in food, dairy, pharmaceutical, and cosmetic plants.

Also known as vacuum isolation valves, these block flow so you can install and remove gauges from your system. They can also be used to add or vent gases in high-vacuum systems.

For food and beverage applications that require frequent cleaning, these valves have quick-clamp connections, polished internal surfaces, and a three-piece bolted body for easy disassembly.

To maintain sanitary standards in food, beverage, and dairy applications, these valves have sanitary quick-clamp connections and polished internal surfaces for easy cleaning.

Often used in sterilization applications with clean steam, these valves are electropolished to a 16 Ra finish for smooth internal surfaces that prevent product buildup and inhibit bacteria growth.

With sanitary quick-clamp connections for easy disassembly in systems that require frequent cleaning, these valves are often used to divert flow between ports in food and beverage applications.

Made of PTFE, these gaskets are chemically inert (except to molten alkali metal and elemental fluorine).

Made from PTFE with an EPDM core, these gaskets have added resiliency resulting in a longer product life.

Offering excellent resistance to detergents, hydraulic fluid, and salts, these PTFE gaskets have a corrosion-resistant 316 stainless steel screen to provide inline straining.

These chemical-resistant gaskets have a perforated plate that filters, separates, and strains liquids or dry materials in your line.

These gaskets meet Fed. Spec. Class 10,000 and ISO Class 7 clean room requirements.

These gaskets resist swelling when they come into contact with oil.

These gaskets meet Fed. Std. Class 10,000 and ISO Class 7 clean room requirements.

When working with water and steam, these gaskets ensure a tight seal.

To prevent contamination in your line, these gaskets set off metal detectors if a piece as small as 1 mm wears off. They’re EPDM, so the tight seal they form in stainless steel quick-clamp tube fittings withstands moist environments.

Even as temperatures rise, these silicone gaskets ensure a tight seal in quick-clamp stainless steel sanitary tube fittings.

A corrosion-resistant 316 stainless steel screen provides inline straining.

In addition to oil, these Buna-N gaskets resist water and salts.

Create a tight seal when connecting Swedish Milk Standard (SMS) fittings.