How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
High-Polish Metal Quick-Clamp Sanitary Tube Fittings
- Temperature Range: See Gaskets
The smooth finish inside these fittings makes it easy to remove product residue. Also known as aseptic and tri-clamp fittings, they connect with a gasket, a clamp, and another quick-clamp fitting for a fast and easy way to access your line. The pressure rating of the fitting will vary depending on the clamp you choose, and the temperature rating will vary based on the gasket material you choose.
316 stainless steel fittings have excellent corrosion resistance.
Fittings that meet DIN standards adhere to international requirements for sanitary quick-clamp fittings.
Note: To complete a connection, you’ll need two quick-clamp fittings, a clamp, and a gasket (all sold separately).
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Beverage, Dairy, Food, Water
- Tubing: Use with welded 304/304L or 316/316L stainless steel
- Specifications Met: DIN 32676
For Tube OD | Flange OD | 316 Stainless Steel | ||||
|---|---|---|---|---|---|---|
| Quick Clamp | Metric Quick Clamp, mm | Quick Clamp | Metric Quick Clamp, mm | Wall Thick. | Each | |
| 1 1/2" | 40 | 1.984" | 52.5 | 0.122" | 0000000 | 0000000 |
Recessed Nut, Hole for
Lockout, and 2-Pin Hinge
Clamps with wing nut tighten by hand. Clamps with bolt tighten with a wrench. They handle higher pressures than wing-nut clamps for a stronger, more secure hold.
| For Tube OD | For Flange OD | Bolt Material | Max. Pressure | For Tube Specifications Met | Specifications Met | Each | |
304 Stainless Steel with Wing Nut | |||||||
|---|---|---|---|---|---|---|---|
| 1", 1 1/4", 1 1/2" | 1.984" | __ | 500 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 00000000 | 000000 |
304 Stainless Steel with Wing Nut, Spring Loaded | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | __ | 500 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 0000000 | 00000 |
304 Stainless Steel with Bolt | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | 304 Stainless Steel | 1,500 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 00000000 | 00000 |
316 Stainless Steel with Wing Nut and 2-Pin Hinge | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | __ | 700 psi @ 72 ° F | __ | __ | 0000000 | 00000 |
316 Stainless Steel with Safety Wing Nut and 2-Pin Hinge | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | __ | 720 psi @ 72 ° F | __ | __ | 0000000 | 00000 |
316 Stainless Steel with Double Bolt | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | 316 Stainless Steel | 2,400 psi @ 72 ° F | __ | ASME BPVC.VIII | 0000000 | 000000 |
316 Stainless Steel with Recessed Nut, Hole for Lockout, and 2-Pin Hinge | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | __ | 720 psi @ 72 ° F | __ | __ | 0000000 | 00000 |
White Nylon Plastic with Wing Nut | |||||||
| 1", 1 1/4", 1 1/2" | 1.984" | __ | 150 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 00000000 | 00000 |
For Tube OD | |||||||
|---|---|---|---|---|---|---|---|
| Gasket Connection | Standard Connection | Wall Thick. | Material | For Tube Specifications Met | Includes | Each | |
| 1 1/2" | 1 1/2" | 0.065" | 316 Stainless Steel | ASTM A269, ASTM A270 | 304 Stainless Steel Nut | 0000000 | 0000000 |
For Tube OD | ||||||
|---|---|---|---|---|---|---|
| Gasket Connection | Standard Connection | Wall Thick. | Material | For Tube Specifications Met | Each | |
| 1 1/2" | 1 1/2" | 0.065" | 316 Stainless Steel | ASTM A269, ASTM A270 | 0000000 | 0000000 |
Flange OD | |||||||
|---|---|---|---|---|---|---|---|
| For Tube OD | Extra-Support Connection | Standard Connection | Wall Thick. | Material | For Tube Specifications Met | Each | |
| 1 1/2" | 1.995" | 1.984" | 0.065" | 316 Stainless Steel | ASTM A269, ASTM A270 | 0000000 | 000000 |
Flange OD | |||||||
|---|---|---|---|---|---|---|---|
| For Tube OD | Extra-Support Connection | Standard Connection | Wall Thick. | Material | For Tube Specifications Met | Each | |
| 1 1/2" | 1.995" | 1.984" | 0.065" | 316 Stainless Steel | ASTM A269, ASTM A270 | 0000000 | 000000 |
Clamps for High-Polish Metal Quick-Clamp Sanitary Tube Fittings
- Temperature Range: See Gaskets or O-Rings
- Tubing:
Inch 304 Stainless Steel and Nylon Plastic: Use with welded 304/304L and 316/316L stainless steel that meets ASTM A269 or ASTM A270
Metric 304 Stainless Steel: Use with welded 304/304L and 316/316L stainless steel
Inch 316 Stainless Steel: Use with welded 304/304 L and 316/316L stainless steel
Metric 316 Stainless Steel: Use with welded 316/316L Stainless Steel
Connect quick-clamp sanitary tube fittings—also known as aseptic fittings—for a fast and easy way to access your line. Clamps with wing nut tighten by hand. Clamps with safety wing nut won’t release from minor loosening or jostling. They have a leak-before-burst design, which means they’ll leak to relieve pressure if the seal fails instead of bursting and causing a safety hazard.
Clamps with bolt tighten with a wrench. They handle higher pressures than wing-nut clamps for a stronger, more secure hold. Double-bolt clamps meet ASME design standards for pressure vessels.
Clamps with recessed nut require a hex socket adapter to loosen the nut, preventing the clamp from tampering and accidental removal. They have a hole for lockout (padlock not included) to block unauthorized access, helping you meet Hazard Analysis and Critical Control Point (HACCP) programs and Good Management Practices (GMP). Both of these security measures reduce the risk of product contamination. These clamps have a leak-before-burst design, so rather than burst dangerously if the seal fails, they’ll safely relieve pressure by dripping instead.
304 stainless steel clamps have very good corrosion resistance.
316 stainless steel clamps are more corrosion resistant than 304 stainless steel clamps. Clamps with two-pin hinge apply more even pressure on gaskets than other clamps, causing less wear and tear on gaskets.
Nylon clamps are lightweight compared to stainless steel clamps.
Clamps that meet DIN 11864 or DIN 32676 adhere to international standards for sanitary quick-clamp fittings.
For technical drawings and 3-D models, click on a part number.
Recessed Nut, Hole for
Lockout, and 2-Pin Hinge
| For Tube OD | For Flange OD | Max. Pressure | Specifications Met | Each | |
304 Stainless Steel with Wing Nut | |||||
|---|---|---|---|---|---|
| 1", 1 1/4", 1 1/2" | 1.984" | 500 psi @ 72° F | __ | 00000000 | 000000 |
304 Stainless Steel with Wing Nut, Spring Loaded | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 500 psi @ 72° F | __ | 0000000 | 00000 |
304 Stainless Steel with Bolt | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 1,500 psi @ 72° F | __ | 00000000 | 00000 |
316 Stainless Steel with Wing Nut | |||||
| 32mm, 40mm | 64mm | 725 psi @ 300° F | DIN 11864 | 0000000 | 00000 |
316 Stainless Steel with Wing Nut and 2-Pin Hinge | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 700 psi @ 72° F | __ | 0000000 | 00000 |
316 Stainless Steel with Safety Wing Nut and 2-Pin Hinge | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 720 psi @ 72° F | __ | 0000000 | 00000 |
316 Stainless Steel with Double Bolt | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 2,400 psi @ 72° F | ASME BPVC.VIII | 0000000 | 000000 |
316 Stainless Steel with Recessed Nut, Hole for Lockout, and 2-Pin Hinge | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 720 psi @ 72° F | __ | 0000000 | 00000 |
White Nylon Plastic with Wing Nut | |||||
| 1", 1 1/4", 1 1/2" | 1.984" | 150 psi @ 72° F | __ | 00000000 | 00000 |
| For Tube OD | ID | OD | Thick. | Temp. Range, °F | Color | Specifications Met | Each | |
Gaskets | ||||||||
|---|---|---|---|---|---|---|---|---|
Buna-N Rubber | ||||||||
| 1" | 0.900" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000 |
EPDM Rubber | ||||||||
| 1" | 0.900" | 1.980" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
Silicone Rubber | ||||||||
| 1" | 0.900" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
Fluoroelastomer Rubber | ||||||||
| 1" | 0.900" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
PTFE Plastic | ||||||||
| 1" | 0.900" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
| 1 1/2" | 1.400" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |