Clear All
Connection Style Connection Style |
|---|
 |
| Threaded |
 |
| Barbed |
 |
| Compression |
Material Material |
|---|
|
For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
For Tube Material For Tube Material |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Sleeve Material Sleeve Material |
|---|
|
Specifications Met Specifications Met |
|---|
Nut Material Nut Material |
|---|
|
Compression Connection Type CompressionConnection Type |
|---|
 | Standard |
For Tube Fabrication For Tube Fabrication |
|---|
|
Maximum Vacuum Maximum Vacuum |
|---|
|
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Backflow-Prevention Valves
More
Vibration-Resistant Compression Fittings for Stainless Steel Tubing
- For Use With: Acetylene, Air, Butane, Compressed Air, Cutting Oil, Diesel Fuel, Fuel Oil, Gasoline, Helium, Hydraulic Fluid (Petroleum Base), Kerosene, Mineral Oil, Natural Gas, Nitrogen, Propane, Soap Solutions
- Temperature Range: -10° to 400° F
- Tubing: Use with seamless 316Ti or 321 stainless steel
- Specifications Met: DIN 3861
Instead of a metal sleeve (ferrule), these fittings have a rubber sleeve that cushions tubing and absorbs vibration to maintain a tight seal, even when connected to large pumps. However, rubber sleeves can’t withstand temperatures as high as metal ones. To create the strong seal, tighten the included nut. These fittings are made of 316 stainless steel, so they have excellent corrosion resistance. They’re also known as flareless fittings. All meet DIN 3861, which is an international standard for compression tube fitting specifications.
BSPP and metric male threads have a gasket to prevent leaks.
For technical drawings and 3-D models, click on a part number.
Straight Adapters, Tube × Male Threaded Pipe
Straight Adapters, Tube × Male Threaded Pipe
BSPP and Metric
Male Threads with
Gasket and Washer
Male Threads with
Gasket and Washer
For Tube | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Pipe Size  | Thread Size | Thread Pitch, mm | Material | Gasket Material | Maximum Pressure | Each | |
NPT Threads | |||||||||
| 6 | 1 | 1/8 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 000000 |
| 6 | 1 | 1/4 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 00000 |
| 8 | 1 | 1/4 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 00000 |
| 10 | 1 | 1/4 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 00000 |
| 10 | 1 | 3/8 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | 1/4 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | 3/8 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | 1/2 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 | 1.5 | 1/2 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 | 2 | 1/2 | __ | __ | 316 Stainless Steel | __ | 4,500 psi @ 72° F | 00000000 | 000000 |
| 22 | 2.5 | 3/4 | __ | __ | 316 Stainless Steel | __ | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 | 2.5 | 1 | __ | __ | 316 Stainless Steel | __ | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 | 3 | 1 1/4 | __ | __ | 316 Stainless Steel | __ | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 | 3.5 | 1 1/2 | __ | __ | 316 Stainless Steel | __ | 2,300 psi @ 72° F | 00000000 | 000000 |
BSPP Threads | |||||||||
| 6 | 1 | 1/8 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 6 | 1 | 1/4 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 8 | 1 | 1/8 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 8 | 1 | 1/4 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 8 | 1 | 3/8 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 10 | 1 | 1/4 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 10 | 1 | 3/8 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 10 | 1 | 1/2 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 12 | 1.5 | 1/4 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | 3/8 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 12 | 1.5 | 1/2 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 | 1.5 | 3/8 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 | 1.5 | 1/2 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 | 2 | 1/2 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 18 | 2 | 3/4 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 22 | 2.5 | 3/4 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 | 2.5 | 1 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 | 3 | 1 1/4 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 | 3.5 | 1 1/2 | __ | __ | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
Metric Threads | |||||||||
| 8 | 1 | __ | M12 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 10 | 1 | __ | M14 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | __ | M16 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | __ | M18 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 12 | 1.5 | __ | M22 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 | 1.5 | __ | M18 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 | 1.5 | __ | M22 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 | 2 | __ | M22 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 22 | 2.5 | __ | M26 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 | 2.5 | __ | M33 | 2 | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 | 3 | __ | M42 | 2 | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 | 3.5 | __ | M48 | 2 | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
Straight Adapters, Tube × Female Threaded Pipe
Straight Adapters, Tube × Female Threaded Pipe
For Tube | ||||||||
|---|---|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Pipe Size | Thread Size | Thread Pitch, mm | Material | Maximum Pressure | Each | |
BSPP Threads | ||||||||
| 6 | 1 | 1/8 | __ | __ | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 8 | 1 | 1/4 | __ | __ | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 8 | 1 | 1/2 | __ | __ | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 | 1 | 1/4 | __ | __ | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 | 1 | 3/8 | __ | __ | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 | 1 | 1/2 | __ | __ | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | 3/8 | __ | __ | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 12 | 1.5 | 1/2 | __ | __ | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 | 1.5 | 1/2 | __ | __ | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 | 2 | 1/2 | __ | __ | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 22 | 2.5 | 3/4 | __ | __ | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 | 2.5 | 1 | __ | __ | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 | 3 | 1 1/4 | __ | __ | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
Metric Threads | ||||||||
| 6 | 1 | __ | M10 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 8 | 1 | __ | M12 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 15 | 1.5 | __ | M18 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 | 2 | __ | M22 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 35 | 3 | __ | M42 | 2 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
Straight Connectors, Tube
Straight Connectors, Tube
For Tube | |||||
|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Material | Maximum Pressure | Each | |
| 6 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 8 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 10 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 | 2 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 22 | 2.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 | 2.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 | 3 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 | 3.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
Through-Wall Straight Connectors, Tube
Through-Wall Connectors, Tube
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
For Tube | |||||||
|---|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Material | Maximum Pressure | For Hole Diameter, mm | For Maximum Wall Thickness, mm | Each | |
| 6 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 12 | 16 | 00000000 | 000000 |
| 8 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 14 | 16 | 00000000 | 000000 |
| 10 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 16 | 16 | 00000000 | 00000 |
| 12 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 18 | 16 | 00000000 | 000000 |
| 15 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 22 | 16 | 00000000 | 000000 |
| 18 | 2 | 316 Stainless Steel | 4,500 psi @ 72° F | 26 | 16 | 00000000 | 000000 |
| 22 | 2.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 30 | 16 | 00000000 | 000000 |
| 28 | 2.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 36 | 16 | 00000000 | 000000 |
| 35 | 3 | 316 Stainless Steel | 2,300 psi @ 72° F | 45 | 16 | 00000000 | 000000 |
| 42 | 3.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 52 | 16 | 00000000 | 000000 |
Straight Connectors (Swivels Until Tightened), Tube
Straight Connectors (Swivels Until Tightened), Tube
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Material | Gasket Material | Maximum Pressure | Each | |
| 6 | 1 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 8 | 1 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 | 1 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 | 2 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 22 | 2.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 | 2.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 | 3 | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 | 3.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
Straight Reducers, Tube
Straight Reducers, Tube
| For Tube OD (Wall Thickness) | Material | Maximum Pressure | Each | |
| 8 mm (1 mm) × 6 mm (1 mm) | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 mm (1 mm) × 6 mm (1 mm) | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 mm (1 mm) × 8 mm (1 mm) | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 mm (1.5 mm) × 6 mm (1 mm) | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 12 mm (1.5 mm) × 8 mm (1 mm) | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 12 mm (1.5 mm) × 10 mm (1 mm) | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 mm (1.5 mm) × 10 mm (1 mm) | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 mm (1.5 mm) × 12 mm (1.5 mm) | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 18 mm (2 mm) × 10 mm (1 mm) | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 mm (2 mm) × 12 mm (1.5 mm) | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 22 mm (2.5 mm) × 12 mm (1.5 mm) | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 22 mm (2.5 mm) × 15 mm (1.5 mm) | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 22 mm (2.5 mm) × 18 mm (2 mm) | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 mm (2.5 mm) × 18 mm (2 mm) | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 mm (2.5 mm) × 22 mm (2.5 mm) | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 mm (3 mm) × 22 mm (2.5 mm) | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 mm (3 mm) × 28 mm (2.5 mm) | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
Straight Reducers (Swivels Until Tightened), Tube
Straight Reducers (Swivels Until Tightened), Tube
| For Tube OD (Wall Thickness) | Material | Gasket Material | Maximum Pressure | Each | |
| 8 mm (1 mm) × 6 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 mm (1 mm) × 6 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 10 mm (1 mm) × 8 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 mm (1.5 mm) × 6 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 mm (1.5 mm) × 8 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 mm (1.5 mm) × 10 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 mm (1.5 mm) × 6 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 15 mm (1.5 mm) × 8 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 mm (1.5 mm) × 10 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 mm (1.5 mm) × 12 mm (1.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 mm (2 mm) × 6 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 mm (2 mm) × 8 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 mm (2 mm) × 10 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 mm (2 mm) × 12 mm (1.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 mm (2 mm) × 15 mm (1.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 22 mm (2.5 mm) × 6 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 22 mm (2.5 mm) × 8 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 22 mm (2.5 mm) × 10 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 22 mm (2.5 mm) × 12 mm (1.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 22 mm (2.5 mm) × 15 mm (1.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 22 mm (2.5 mm) × 18 mm (2 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 mm (2.5 mm) × 6 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 mm (2.5 mm) × 8 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 mm (2.5 mm) × 10 mm (1 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 mm (2.5 mm) × 12 mm (1.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 mm (2.5 mm) × 15 mm (1.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 mm (2.5 mm) × 18 mm (2 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 mm (2.5 mm) × 22 mm (2.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 mm (3 mm) × 12 mm (1.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 mm (3 mm) × 15 mm (1.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 mm (3 mm) × 18 mm (2 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 mm (3 mm) × 22 mm (2.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 mm (3 mm) × 28 mm (2.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 mm (3.5 mm) × 18 mm (2 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 mm (3.5 mm) × 22 mm (2.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 mm (3.5 mm) × 28 mm (2.5 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 mm (3.5 mm) × 35 mm (3 mm) | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
90° Elbow Adapters, Tube × Male Threaded Pipe
90° Elbow
Adapters, Tube ×
Male Threaded Pipe
Adapters, Tube ×
Male Threaded Pipe
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Pipe Size | Material | Maximum Pressure | Each | |
NPT Threads | ||||||
| 6 | 1 | 1/8 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 6 | 1 | 1/4 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 8 | 1 | 1/4 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 | 1 | 1/4 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 | 1 | 3/8 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 12 | 1.5 | 1/4 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 12 | 1.5 | 1/2 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 | 1.5 | 1/2 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 | 2 | 1/2 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 22 | 2.5 | 3/4 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 | 2.5 | 1 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 | 3.5 | 1 1/2 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
90° Elbow Connectors, Tube
90° Elbow Connectors, Tube
For Tube | |||||
|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Material | Maximum Pressure | Each | |
| 6 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 0000000 |
| 8 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 | 2 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 22 | 2.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 | 2.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 | 3 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 | 3.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
Tee Connectors, Tube
Tee Connectors, Tube
For Tube | |||||
|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Material | Maximum Pressure | Each | |
| 6 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 0000000 |
| 8 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 12 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 | 2 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 22 | 2.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 28 | 2.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 | 3 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 | 3.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
Cross Connectors, Tube
Cross Connectors, Tube
For Tube | |||||
|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Material | Maximum Pressure | Each | |
| 6 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 0000000 |
| 8 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 10 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 12 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 15 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 18 | 2 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 22 | 2.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 | 3 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 | 3.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 00000000 |
Nuts
Nut
For Tube | |||||
|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Nut Material | Maximum Pressure | Each | |
| 6 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 000000 |
| 8 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 10 | 1 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 15 | 1.5 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 18 | 2 | 316 Stainless Steel | 4,500 psi @ 72° F | 00000000 | 00000 |
| 22 | 2.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 00000 |
| 28 | 2.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 | 3 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 | 3.5 | 316 Stainless Steel | 2,300 psi @ 72° F | 00000000 | 000000 |
Nuts for Vibration-Resistant Compression Fittings for Stainless Steel Tubing
Nut
- For Use With: Acetylene, Air, Butane, Diesel Fuel, Compressed Air, Cutting Oil, Fuel Oil, Gasoline, Hydraulic Fluid (Petroleum Base), Kerosene, Mineral Oil, Natural Gas, Helium, Nitrogen, Propane, Soap Solutions
- Temperature Range: -10° to 400° F
- Tubing: Use with seamless 316Ti or 321 stainless steel
- Specifications Met: DIN 3861
Pair these nuts with vibration-resistant compression sleeves and fittings for a strong seal on stainless steel tubing. Made of 316 stainless steel, they have excellent corrosion resistance. All meet DIN 3861, which is an international standard for compression tube fitting specifications.
For technical drawings and 3-D models, click on a part number.
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Nut Material | Sleeve Material | Maximum Pressure | Each | |
| 6 | 1 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 000000 |
| 8 | 1 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 10 | 1 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 12 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 15 | 1.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 18 | 2 | 316 Stainless Steel | Fluoroelastomer Rubber | 4,500 psi @ 72° F | 00000000 | 00000 |
| 22 | 2.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 00000 |
| 28 | 2.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 35 | 3 | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
| 42 | 3.5 | 316 Stainless Steel | Fluoroelastomer Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
Check Valves with Barbed Fittings for Harsh Chemicals
Spring-Loaded Ball Check Valve
Prevent backflow in chemical tubing lines. These valves have barbed fittings that grip onto tubing, providing a secure hold. The plastic body and fluoroelastomer seal provide excellent chemical resistance. Valves open to allow flow in one direction and close when flow stops or reverses.
Polypropylene valves are more corrosion resistant than nylon valves.
Nylon valves are more impact resistant than polypropylene valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Polypropylene Plastic Body—Spring-Loaded Ball
- For Use With: Acetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene, Water, Xenon, Xylene
- Ball Material: 316 Stainless Steel
- Spring Material: 302 Stainless Steel
- Seal Material: Fluoroelastomer Rubber
Nylon Plastic Body—Spring-Loaded Ball
- For Use With: Acetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene, Water, Xenon, Xylene
- Ball Material: 316 Stainless Steel
- Spring Material: 302 Stainless Steel
- Seal Material: Fluoroelastomer Rubber