The lightweight, spongy walls provide thermal insulation, so the tubing won’t produce condensation when cold air or fluid runs through it.

This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.

Also known as air brake tubing, this tubing meets D.O.T. FMVSS 106 or D.O.T. FMVSS 49 specifications for testing and performance requirements in motor vehicle brake systems.

Conductive material embedded in the walls, along with a metal strip, lets this tubing divert static buildup away from sensitive equipment when conveying dry materials such as flour, salt, and sugar. Tubing has a diameter of 4" or larger to handle bulk food processing applications.

The threads on these fittings mate with NPT, NPTF, BSPT, and BSPP threads.

Barbs grip onto tubing.

Lighter in weight than metal quick-disconnect couplings, these couplings are plastic.

Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push, and an internal gripping ring and fluoroelastomer O-ring hold the tubing tight.

These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Hose has a single thin layer of PVC-coated fiberglass for venting smoke, water-based paint fumes, and welding fumes.

Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.

Tough, resilient EVA (ethylene vinyl acetate) offers excellent impact resistance and is long lasting.

Step on or drive over this hose without causing damage.

If your liquid contains some solid particles, this tough EPDM rubber hose can handle the extra abrasion.

Identify your air lines by color.

A tough EPDM rubber cover protects the hose from damage. Use hose with juice, meat, milk, poultry, and syrup.

Strong yarn reinforces this hose to give it a higher pressure rating than other food and beverage hose. Also known as brewer’s and vintner’s hose, the hose material is FDA compliant.

CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.

Often used as a protective shield in thermocouples and other conditions with drastic climate changes, these SiAlON ceramic tubes won't deform, expand, or crack when repeatedly exposed to large temperature changes.

Rated UL 94 V-2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.

Wrap this sleeving around wire, cable, and hose without disconnecting them. It has a slit along the entire length and wraps over itself to stay closed without an adhesive strip or other closure.

Attach conduit to a knockout in an outlet box or enclosure.

Also known as Type B, this conduit is more crush and abrasion resistant than liquid-tight flexible plastic conduit.

Even in temperatures as low as -50° F and as high as 220° F, this conduit stays flexible.

In addition to resisting oil, this conduit resists lubricants and grease.

Join pieces of conduit.

Connect different sizes and genders of conduit.

This is also known as PVC Schedule 40 conduit.

Often used in automated applications such as robotics, this highly flexible silicone rubber tubing withstands continuous motion without cracking and tearing. It resists abrasion and can be dragged over rough surfaces without damage.

Also known as breakout boots, these splitters insulate and seal the point where wire splits off from cable, or where cables exit from conduit.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.

Route wires, cables, and tubing along T‐slotted rails.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.

Wire, cable, and cords pass through the grommet opening while the bristles fill in the gaps to control dust and debris. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 and Fed. Spec. Class 100 clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems.