Choose a Category
Clear All
System of Measurement System of Measurement |
|---|
|
OD OD |
|---|
ID ID |
|---|
Wall Thickness Wall Thickness |
|---|
|
|
|
Material Material |
|---|
|
For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
Shape Shape |
|---|
 | Round Tube |
Flexibility Flexibility |
|---|
 | Flexible |
 | Semi-Rigid |
Performance Properties Performance Properties |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
|
Connection Style Connection Style |
|---|
 |
| Barbed |
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Comparable To Comparable To |
|---|
|
|
Specifications Met Specifications Met |
|---|
|
Friction Rating Friction Rating |
|---|
|
Hardness Hardness |
|---|
|
Tolerance Rating Tolerance Rating |
|---|
|
|
Maximum Pressure Maximum Pressure |
|---|
|
About Plastic
More
About Plastic and Rubber Tubing
More
Ultra-Chemical-Resistant Soft Plastic Tubing
- Versilon Trade Number: SE-200
- Flexible
- Compatible with Single-Barbed Tube Fittings
- Soft (Durometer 65A)
- Temperature Range: -30° to 160° F
An FEP (fluorinated ethylene propylene) liner gives this tubing better chemical resistance than any of our other soft tubing. It also provides a smooth interior for unrestricted flow. Tubing is also known as Versilon and formerly was known as Tygon. It is clear, so you can easily monitor flow. It is flexible, so it bends easily around objects.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Wall Thick. | Max. Pressure | Color | Lengths, ft. | Per Ft. | |
Clear Versilon PVC Plastic | |||||||
|---|---|---|---|---|---|---|---|
| 1/16" | 1/8" | 1/32" | 100 psi @ 72° F | Clear | 0000000 | 00000 | |
| 1/8" | 1/4" | 1/16" | 85 psi @ 72° F | Clear | 0000000 | 0000 | |
| 3/16" | 5/16" | 1/16" | 75 psi @ 72° F | Clear | 0000000 | 0000 | |
| 1/4" | 3/8" | 1/16" | 55 psi @ 72° F | Clear | 0000000 | 0000 | |
| 3/8" | 9/16" | 3/32" | 50 psi @ 72° F | Clear | 0000000 | 0000 | |
| 1/2" | 3/4" | 1/8" | 45 psi @ 72° F | Clear | 0000000 | 0000 | |
| 3/4" | 1" | 1/8" | 30 psi @ 72° F | Clear | 0000000 | 0000 | |
Wear-Resistant Nylon Tubes
- Color: Off-White
- Temperature Range: -40° to 165° F
- Tensile Strength: 11,200-12,300 psi (Good)
- Impact Strength: 0.6-1.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell R108-R121 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D6779, FDA Compliant 21 CFR 177.1500, UL 94HB
Because these wear-resistant nylon 6/6 tubes have a slippery surface that reduces friction, they’re often machined into bearings, gears, and valve seats.
Tubes with an oversized OD also have an undersized ID for finishing to the sizes listed.
For technical drawings and 3-D models, click on a part number.
Tubes
5 ft. Lg. | |||||
|---|---|---|---|---|---|
| OD | OD Tolerance | ID | ID Tolerance | Each | |
1/32" Wall Thick. | |||||
| 3/8" | -0.005" to 0.005" | 5/16" | -0.005" to 0.005" | 0000000 | 00000 |
| 1/2" | -0.005" to 0.005" | 7/16" | -0.005" to 0.005" | 0000000 | 0000 |
| 5/8" | -0.010" to 0.010" | 9/16" | -0.010" to 0.010" | 0000000 | 0000 |
| 3/4" | -0.010" to 0.010" | 11/16" | -0.010" to 0.010" | 0000000 | 0000 |
| 7/8" | -0.010" to 0.010" | 13/16" | -0.010" to 0.010" | 0000000 | 0000 |
| 1" | -0.010" to 0.010" | 15/16" | -0.010" to 0.010" | 0000000 | 0000 |
| 1 1/4" | -0.015" to 0.015" | 1 3/16" | -0.015" to 0.015" | 0000000 | 00000 |
| 1 1/2" | -0.015" to 0.015" | 1 7/16" | -0.015" to 0.015" | 0000000 | 00000 |
1/16" Wall Thick. | |||||
| 1/4" | -0.005" to 0.005" | 1/8" | -0.005" to 0.005" | 0000000 | 0000 |
| 3/8" | -0.005" to 0.005" | 1/4" | -0.005" to 0.005" | 0000000 | 0000 |
| 1/2" | -0.005" to 0.005" | 3/8" | -0.005" to 0.005" | 0000000 | 0000 |
| 5/8" | -0.010" to 0.010" | 1/2" | -0.010" to 0.010" | 0000000 | 0000 |
| 3/4" | -0.010" to 0.010" | 5/8" | -0.010" to 0.010" | 0000000 | 00000 |
| 7/8" | -0.010" to 0.010" | 3/4" | -0.010" to 0.010" | 0000000 | 00000 |
| 1" | -0.010" to 0.010" | 7/8" | -0.010" to 0.010" | 0000000 | 00000 |
| 1 1/4" | -0.015" to 0.015" | 1 1/8" | -0.015" to 0.015" | 0000000 | 00000 |
| 1 1/2" | -0.015" to 0.015" | 1 3/8" | -0.015" to 0.015" | 0000000 | 00000 |
1/8" Wall Thick. | |||||
| 3/8" | -0.005" to 0.005" | 1/8" | -0.005" to 0.005" | 0000000 | 00000 |
| 1/2" | -0.005" to 0.005" | 1/4" | -0.005" to 0.005" | 0000000 | 00000 |
| 5/8" | -0.010" to 0.010" | 3/8" | -0.010" to 0.010" | 0000000 | 00000 |
| 3/4" | -0.010" to 0.010" | 1/2" | -0.010" to 0.010" | 0000000 | 00000 |
| 7/8" | -0.010" to 0.010" | 5/8" | -0.010" to 0.010" | 0000000 | 00000 |
| 1" | -0.010" to 0.010" | 3/4" | -0.010" to 0.010" | 0000000 | 00000 |
| 1 1/4" | -0.015" to 0.015" | 1" | -0.015" to 0.015" | 0000000 | 00000 |
| 1 1/2" | -0.015" to 0.015" | 1 1/4" | -0.015" to 0.015" | 0000000 | 00000 |
Oversized Tubes
5 ft. Lg. | |||
|---|---|---|---|
| OD | ID | Each | |
1/16" Wall Thick. | |||
| 1/4" | 1/8" | 0000000 | 00000 |
| 5/8" | 1/2" | 0000000 | 00000 |
1/8" Wall Thick. | |||
| 1/2" | 1/4" | 0000000 | 00000 |
| 5/8" | 3/8" | 0000000 | 00000 |
| 3/4" | 1/2" | 0000000 | 00000 |
| 7/8" | 5/8" | 0000000 | 00000 |
| 1" | 3/4" | 0000000 | 00000 |
| 1 1/4" | 1" | 0000000 | 00000 |
| 1 1/2" | 1 1/4" | 0000000 | 00000 |
| 1 3/4" | 1 1/2" | 0000000 | 00000 |
| 2" | 1 3/4" | 0000000 | 00000 |
| 2 1/4" | 2" | 00000000 | 00000 |
| 2 1/2" | 2 1/4" | 0000000 | 00000 |
3/16" Wall Thick. | |||
| 5/8" | 1/4" | 0000000 | 00000 |
1/4" Wall Thick. | |||
| 3/4" | 1/4" | 0000000 | 00000 |
| 7/8" | 3/8" | 0000000 | 00000 |
| 1" | 1/2" | 0000000 | 00000 |
| 1 1/8" | 5/8" | 0000000 | 00000 |
| 1 1/4" | 3/4" | 0000000 | 00000 |
| 1 1/2" | 1" | 0000000 | 00000 |
| 1 3/4" | 1 1/4" | 0000000 | 00000 |
| 2" | 1 1/2" | 0000000 | 00000 |
| 2 1/2" | 2" | 00000000 | 000000 |
3/8" Wall Thick. | |||
| 1 1/4" | 1/2" | 0000000 | 00000 |
Easy-to-Machine Wear-Resistant Cast Nylon Tubes
- Color: Off-White
- Temperature Range: -20° to 200° F
- Tensile Strength: 10,000 psi (Good)
- Impact Strength: 1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R110-R115 (Hard)
- For Use Outdoors: No
- Specifications Met: ASTM D5989, FDA Compliant 21 CFR 177.1503, UL 94HB
These cast nylon 6 tubes are easier to machine than other standard nylon 6/6 rods. They’re also better electrical insulators. Use them to make pulleys, bushings, and bearings. These tubes have an oversized OD and an undersized ID for finishing to the sizes listed. This material is comparable to Nylatron and Nycast.
For technical drawings and 3-D models, click on a part number.
Oversized Tubes
| OD | ID | Lengths, ft. | Per Ft. | |
1/4" Wall Thick. | ||||
|---|---|---|---|---|
| 2" | 1 1/2" | 000000000 | 000000 | |
1/2" Wall Thick. | ||||
| 2" | 1" | 000000000 | 00000 | |
| 2 1/4" | 1 1/4" | 000000000 | 00000 | |
| 2 1/2" | 1 1/2" | 000000000 | 00000 | |
| 2 3/4" | 1 3/4" | 000000000 | 00000 | |
| 3" | 2" | 000000000 | 00000 | |
| 3 1/4" | 2 1/4" | 000000000 | 00000 | |
| 3 1/2" | 2 1/2" | 000000000 | 00000 | |
| 4" | 3" | 000000000 | 00000 | |
| 4 1/2" | 3 1/2" | 000000000 | 00000 | |
| 5" | 4" | 000000000 | 00000 | |
| 5 1/2" | 4 1/2" | 000000000 | 00000 | |
5/8" Wall Thick. | ||||
| 2 1/4" | 1" | 000000000 | 00000 | |
| 2 3/4" | 1 1/2" | 000000000 | 00000 | |
| 3 1/4" | 2" | 000000000 | 00000 | |
3/4" Wall Thick. | ||||
| 2 1/2" | 1" | 000000000 | 00000 | |
| 3" | 1 1/2" | 000000000 | 00000 | |
| 3 1/2" | 2" | 000000000 | 00000 | |
| 4 1/2" | 3" | 000000000 | 00000 | |
| 5" | 3 1/2" | 000000000 | 00000 | |
| 5 1/2" | 4" | 000000000 | 00000 | |
1" Wall Thick. | ||||
| 3" | 1" | 000000000 | 00000 | |
| 3 1/4" | 1 1/4" | 000000000 | 00000 | |
| 3 1/2" | 1 1/2" | 000000000 | 00000 | |
| 4" | 2" | 000000000 | 00000 | |
| 4 1/2" | 2 1/2" | 000000000 | 00000 | |
| 5" | 3" | 000000000 | 00000 | |
| 5 1/2" | 3 1/2" | 000000000 | 000000 | |
| 6" | 4" | 000000000 | 000000 | |
| 7" | 5" | 000000000 | 000000 | |
| 7 1/2" | 5 1/2" | 000000000 | 000000 | |
1 1/4" Wall Thick. | ||||
| 6 1/2" | 4" | 000000000 | 000000 | |
1 1/2" Wall Thick. | ||||
| 6" | 3" | 000000000 | 000000 | |
| 7" | 4" | 000000000 | 000000 | |
1 3/4" Wall Thick. | ||||
| 6 1/2" | 3" | 000000000 | 000000 | |
| 7 1/2" | 4" | 000000000 | 000000 | |
Oil-Filled Easy-to-Machine
Wear-Resistant Cast Nylon Tubes
- Color: Green
- Temperature Range: 32° to 230° F
- Tensile Strength: 9,500-10,000 psi (Good)
- Impact Strength: 1.2-1.4 ft-lbs./in. (Poor)
- Hardness: Rockwell R110 (Hard)
- For Use Outdoors: Yes
- Specifications Met: ASTM D5989
Impregnated with oil, these tubes remain slippery over time. Use them to fabricate pulleys, bushings, and bearings for use in hard-to-reach areas where adding a lubricant would be difficult. Because they are made of cast nylon 6, they are easier to machine than standard nylon rods, plus they’re better electrical insulators. The OD is oversized and the ID is undersized for finishing to the sizes listed. This material is comparable to Nycast and Nyloil.
For technical drawings and 3-D models, click on a part number.
Oversized Tubes
| OD | ID | Lengths, ft. | Per Ft. | |
1/4" Wall Thick. | ||||
|---|---|---|---|---|
| 2" | 1 1/2" | 000000000 | 000000 | |
1/2" Wall Thick. | ||||
| 2" | 1" | 000000000 | 00000 | |
| 2 1/4" | 1 1/4" | 000000000 | 00000 | |
| 2 1/2" | 1 1/2" | 000000000 | 00000 | |
| 2 3/4" | 1 3/4" | 000000000 | 00000 | |
| 3" | 2" | 000000000 | 00000 | |
| 3 1/4" | 2 1/4" | 000000000 | 00000 | |
| 3 1/2" | 2 1/2" | 000000000 | 00000 | |
| 4" | 3" | 000000000 | 00000 | |
| 4 1/2" | 3 1/2" | 000000000 | 00000 | |
| 5" | 4" | 000000000 | 00000 | |
| 5 1/2" | 4 1/2" | 000000000 | 00000 | |
5/8" Wall Thick. | ||||
| 2 1/4" | 1" | 000000000 | 00000 | |
| 2 3/4" | 1 1/2" | 000000000 | 00000 | |
| 3 1/4" | 2" | 000000000 | 00000 | |
3/4" Wall Thick. | ||||
| 2 1/2" | 1" | 000000000 | 00000 | |
| 3" | 1 1/2" | 000000000 | 00000 | |
| 3 1/2" | 2" | 000000000 | 00000 | |
| 4 1/2" | 3" | 000000000 | 00000 | |
| 5" | 3 1/2" | 000000000 | 00000 | |
| 5 1/2" | 4" | 000000000 | 00000 | |
1" Wall Thick. | ||||
| 3" | 1" | 000000000 | 00000 | |
| 3 1/4" | 1 1/4" | 000000000 | 00000 | |
| 3 1/2" | 1 1/2" | 000000000 | 00000 | |
| 4" | 2" | 000000000 | 00000 | |
| 4 1/2" | 2 1/2" | 000000000 | 00000 | |
| 5" | 3" | 000000000 | 00000 | |
| 5 1/2" | 3 1/2" | 000000000 | 00000 | |
| 6" | 4" | 000000000 | 00000 | |
1 1/2" Wall Thick. | ||||
| 6" | 3" | 000000000 | 000000 | |
Slippery UHMW Polyethylene Tubes
These impact- and wear-resistant tubes offer 360° protection from scrapes and strikes to wires, cords, and anything that can slide through them. UHMW has a low-friction surface that resists sticking and binding.
Tubes with an oversized OD also have an undersized ID for finishing to the sizes listed.
Tight-tolerance tubes, also known as bushing stock, slide over rods and inside shafts to increase or decrease the diameter. Their precise sizing allows ascending sizes to fit inside each other to create a thicker wall.
Oversized Tubes
- Color: White
- Temperature Range: -20° to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: ASTM D4020, Made of FDA Listed Material, UL 94HB
| OD | OD Tolerance | ID | ID Tolerance | Lengths, ft. | Per Ft. | |
1/8" Wall Thick. | ||||||
|---|---|---|---|---|---|---|
| 2" | Not Rated | 1 3/4" | Not Rated | 0000000 | 000000 | |
3/16" Wall Thick. | ||||||
| 1 3/8" | Not Rated | 1" | Not Rated | 0000000 | 0000 | |
| 1 5/8" | Not Rated | 1 1/4" | Not Rated | 0000000 | 0000 | |
| 2 1/4" | Not Rated | 1 7/8" | Not Rated | 0000000 | 00000 | |
| 2 5/8" | Not Rated | 2 1/4" | Not Rated | 0000000 | 00000 | |
| 3 1/8" | Not Rated | 2 3/4" | Not Rated | 0000000 | 00000 | |
1/4" Wall Thick. | ||||||
| 1" | Not Rated | 1/2" | Not Rated | 0000000 | 0000 | |
| 1 1/2" | Not Rated | 1" | Not Rated | 0000000 | 0000 | |
| 2" | Not Rated | 1 1/2" | Not Rated | 0000000 | 00000 | |
| 2 1/4" | Not Rated | 1 3/4" | Not Rated | 0000000 | 00000 | |
| 2 1/2" | Not Rated | 2" | Not Rated | 0000000 | 00000 | |
| 3" | Not Rated | 2 1/2" | Not Rated | 0000000 | 00000 | |
| 3 1/2" | Not Rated | 3" | Not Rated | 0000000 | 00000 | |
| 4" | Not Rated | 3 1/2" | Not Rated | 0000000 | 00000 | |
| 4 1/2" | Not Rated | 4" | Not Rated | 0000000 | 00000 | |
| 5" | Not Rated | 4 1/2" | Not Rated | 0000000 | 00000 | |
| 6 1/4" | Not Rated | 5 3/4" | Not Rated | 0000000 | 00000 | |
5/16" Wall Thick. | ||||||
| 7/8" | Not Rated | 1/4" | Not Rated | 0000000 | 0000 | |
| 1 1/4" | Not Rated | 5/8" | Not Rated | 0000000 | 00000 | |
| 1 3/8" | Not Rated | 3/4" | Not Rated | 0000000 | 0000 | |
| 1 7/8" | Not Rated | 1 1/4" | Not Rated | 0000000 | 00000 | |
| 2 3/8" | Not Rated | 1 3/4" | Not Rated | 0000000 | 00000 | |
3/8" Wall Thick. | ||||||
| 1 3/8" | Not Rated | 5/8" | Not Rated | 0000000 | 0000 | |
| 2 3/4" | Not Rated | 2" | Not Rated | 0000000 | 00000 | |
| 8 5/8" | Not Rated | 7 7/8" | Not Rated | 0000000 | 00000 | |
1/2" Wall Thick. | ||||||
| 1 1/2" | Not Rated | 1/2" | Not Rated | 0000000 | 0000 | |
| 2" | Not Rated | 1" | Not Rated | 0000000 | 00000 | |
| 2 1/2" | Not Rated | 1 1/2" | Not Rated | 0000000 | 00000 | |
| 3" | Not Rated | 2" | Not Rated | 0000000 | 00000 | |
| 3 1/2" | Not Rated | 2 1/2" | Not Rated | 0000000 | 00000 | |
| 4" | Not Rated | 3" | Not Rated | 0000000 | 00000 | |
Tight-Tolerance Tubes
- Color: White
- Temperature Range: -20° to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: ASTM D4020, Made of FDA Listed Material
6" Lg. | |||||
|---|---|---|---|---|---|
| OD | OD Tolerance | ID | ID Tolerance | Each | |
1/4" Wall Thick. (-0.06" to 0") | |||||
| 3/4" | -0.030" to 0.000" | 1/4" | 0.000" to 0.030" | 0000000 | 000000 |
| 1 1/4" | -0.030" to 0.000" | 3/4" | 0.000" to 0.030" | 0000000 | 00000 |
| 1 3/4" | -0.030" to 0.000" | 1 1/4" | 0.000" to 0.030" | 0000000 | 00000 |
| 2 1/4" | -0.030" to 0.000" | 1 3/4" | 0.000" to 0.030" | 0000000 | 00000 |
| 2 3/4" | -0.030" to 0.000" | 2 1/4" | 0.000" to 0.030" | 0000000 | 00000 |
| 3 1/4" | -0.030" to 0.000" | 2 3/4" | 0.000" to 0.030" | 0000000 | 00000 |
| 3 3/4" | -0.030" to 0.000" | 3 1/4" | 0.000" to 0.030" | 0000000 | 00000 |
Chemical-Resistant Slippery PTFE Tubes
- Color: White
- Temperature Range: -350° to 500° F
- Tensile Strength: 3,500 psi (Poor)
- Impact Strength: 2 ft.-lbs./in. (Good)
- Hardness: Durometer 50D-55D (Medium Soft)
- For Use Outdoors: Yes
- Specifications Met: ASTM D1710, Made of FDA Listed Material, UL 94V0, USP Class VI
Known for their naturally slippery surface, these PTFE tubes are often made into bearings, rollers, and parts that slide and roll. They have exceptional resistance to chemicals and perform better than other plastic tubes in extreme temperatures. These easy-to-machine tubes are also excellent electrical insulators.
| OD | ID | Lengths, ft. | Per Ft. | |
Oversized Tubes | ||||
|---|---|---|---|---|
1/16" Wall Thick. | ||||
| 1/4" | 1/8" | 0000000 | 00000 | |
| 5/16" | 3/16" | 0000000 | 0000 | |
| 3/8" | 1/4" | 0000000 | 0000 | |
| 7/16" | 5/16" | 0000000 | 0000 | |
| 1/2" | 3/8" | 0000000 | 0000 | |
| 9/16" | 7/16" | 0000000 | 0000 | |
| 5/8" | 1/2" | 0000000 | 0000 | |
| 3/4" | 5/8" | 0000000 | 00000 | |
| 1" | 7/8" | 0000000 | 00000 | |
3/32" Wall Thick. | ||||
| 1/4" | 1/16" | 0000000 | 0000 | |
| 1/2" | 5/16" | 0000000 | 0000 | |
1/8" Wall Thick. | ||||
| 1/2" | 1/4" | 0000000 | 0000 | |
| 5/8" | 3/8" | 0000000 | 0000 | |
| 3/4" | 1/2" | 0000000 | 0000 | |
| 7/8" | 5/8" | 0000000 | 00000 | |
| 1" | 3/4" | 0000000 | 00000 | |
| 1 1/4" | 1" | 0000000 | 00000 | |
| 1 1/2" | 1 1/4" | 0000000 | 00000 | |
| 1 3/4" | 1 1/2" | 0000000 | 00000 | |
| 2" | 1 3/4" | 0000000 | 00000 | |
3/16" Wall Thick. | ||||
| 5/8" | 1/4" | 0000000 | 0000 | |
| 3/4" | 3/8" | 0000000 | 00000 | |
| 1" | 5/8" | 0000000 | 00000 | |
| 1 1/4" | 7/8" | 0000000 | 00000 | |
| 1 3/8" | 1" | 0000000 | 00000 | |
| 1 3/4" | 1 3/8" | 0000000 | 00000 | |
| 1 7/8" | 1 1/2" | 0000000 | 00000 | |
1/4" Wall Thick. | ||||
| 3/4" | 1/4" | 0000000 | 00000 | |
| 7/8" | 3/8" | 0000000 | 00000 | |
| 1" | 1/2" | 0000000 | 00000 | |
| 1 3/8" | 7/8" | 0000000 | 00000 | |
| 1 1/2" | 1" | 0000000 | 00000 | |
| 2" | 1 1/2" | 0000000 | 00000 | |
| 2 1/2" | 2" | 0000000 | 000000 | |
3/8" Wall Thick. | ||||
| 2 1/4" | 1 1/2" | 0000000 | 00000 | |
1/2" Wall Thick. | ||||
| 3" | 2" | 0000000 | 000000 | |
3" Lg. | 6" Lg. | 12" Lg. | |||||
|---|---|---|---|---|---|---|---|
| OD | ID | Each | Each | Each | |||
1/4" Wall Thick. | |||||||
| 3 1/2" | 3" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 0000000 |
| 4" | 3 1/2" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
| 4 1/2" | 4" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
1/2" Wall Thick. | |||||||
| 4" | 3" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 5" | 4" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 6" | 5" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
3/4" Wall Thick. | |||||||
| 4" | 2 1/2" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 7" | 5 1/2" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
1" Wall Thick. | |||||||
| 4" | 2" | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 6" | 4" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 7" | 5" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
1 1/4" Wall Thick. | |||||||
| 5" | 2 1/2" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
1 1/2" Wall Thick. | |||||||
| 6" | 3" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
2" Wall Thick. | |||||||
| 7" | 3" | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
Durable Glass-Filled Chemical-Resistant
Slippery PTFE Tubes
- Color: Off-White
- Temperature Range: -350° to 500° F
- Tensile Strength: 1,000-2,500 psi (Poor)
- Impact Strength: Not Rated
- Hardness: Durometer 55D-66D (Medium Soft)
- For Use Outdoors: Yes
- Specifications Met: UL 94V0
For increased rigidity and durability over standard PTFE tubes, choose these glass-filled PTFE tubes. They offer the same naturally slippery surface that you’d expect from PTFE, along with the excellent resistance to chemicals and extreme temperatures. They can be machined to close tolerances because the reinforcement prevents them from expanding when exposed to water and heat. The OD is oversized and the ID is undersized for finishing to the sizes listed.
For technical drawings and 3-D models, click on a part number.
1 ft. Lg. | |||||
|---|---|---|---|---|---|
| OD | OD Tolerance | ID | ID Tolerance | Each | |
Oversized Tubes | |||||
1/8" Wall Thick. (-0.025" to 0.025") | |||||
| 1/2" | 0.000" to 0.025" | 1/4" | -0.025" to 0.000" | 0000000 | 000000 |
| 5/8" | 0.000" to 0.025" | 3/8" | -0.025" to 0.000" | 0000000 | 00000 |
| 3/4" | 0.000" to 0.025" | 1/2" | -0.025" to 0.000" | 0000000 | 00000 |
| 1" | 0.000" to 0.025" | 3/4" | -0.025" to 0.000" | 0000000 | 00000 |
1/2" Wall Thick. | |||||
| 2" | 0.000" to 0.188" | 1" | -0.188" to 0.000" | 0000000 | 000000 |
| 2 1/2" | 0.000" to 0.188" | 1 1/2" | -0.188" to 0.000" | 0000000 | 000000 |
5/8" Wall Thick. | |||||
| 3" | 0.000" to 0.188" | 1 3/4" | -0.188" to 0.000" | 0000000 | 000000 |
3/4" Wall Thick. | |||||
| 2 1/2" | 0.000" to 0.188" | 1" | -0.188" to 0.000" | 0000000 | 000000 |
| 3 1/2" | 0.000" to 0.188" | 2" | -0.188" to 0.000" | 0000000 | 000000 |
7/8" Wall Thick. | |||||
| 3" | 0.000" to 0.188" | 1 1/4" | -0.188" to 0.000" | 0000000 | 000000 |
1" Wall Thick. | |||||
| 3" | 0.000" to 0.188" | 1" | -0.188" to 0.000" | 0000000 | 000000 |
| 3 1/2" | 0.000" to 0.188" | 1 1/2" | -0.188" to 0.000" | 0000000 | 000000 |
The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)