About Metal Tubing
More
Miniature Stainless Steel Tubing
Also known as hypodermic or needle tubing, this tubing has thin walls and is made to tight tolerances for use in precision applications. It is welded with a smoothed weld bead on the inside to reduce particle buildup. Tubing connects by welding. To cut this tubing, you can use abrasive cutoff wheels and deburring tools or electrolytic cutting tools (not included).
304 stainless steel has very good corrosion resistance.
316 stainless steel has excellent corrosion resistance.
- Temperature Range: See table
- Bending Method: Tube Bender
| OD | Wall Thick. | ID | Tubing Needle Gauge | Max. Pressure | Temperature Range, °F | Temper Rating | 1 ft. | 3 ft. | |
304 Stainless Steel—For Use With Air, Natural Gas, Oil, Water | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.12" | 0.013" | 0.094" | 11 | 4,000 psi @ 72° F | -420° to 600° | Hard | 0000000 | ||
316 Stainless Steel—For Use With Air, Natural Gas, Oil, Water | |||||||||
| 0.12" | 0.013" | 0.094" | 11 | 4,000 psi @ 72° F | -420° to 600° | Hard | 00000000 | ||
Miniature Stainless Steel Tubing with Polished Exterior
- Temperature Range: -420° to 600° F
- Bending Method: Tube Bender
The outside of this small-diameter tubing is polished to a high-luster finish for a shiny appearance. Also known as hypodermic or needle tubing, it has thin walls and is made to tight tolerances for use in precision applications. It is welded with a smoothed weld bead on the inside to reduce particle buildup. Tubing has very good corrosion resistance. It connects by welding. To cut this tubing, you can use abrasive cutoff wheels and deburring tools or electrolytic cutting tools (not included).
For technical drawings and 3-D models, click on a part number.
Nonporous Alumina Ceramic Tubes
- Color: White
- Max. Temperature: 3075° F
- Fabrication: Fired
- Porosity: 0%
- Compressive Strength: 300,000 psi
Seal out air and gas in high-temperature and high-wear applications. This ultrahard ceramic can also be used in applications that require superior strength.
For technical drawings and 3-D models, click on a part number.