This general purpose tubing is the industry standard for air and water applications.

Stretch it, bend it, compress it – this tubing will spring back to its original shape.

This tubing can handle continuous bending and flexing in applications requiring movement, such as metering (peristaltic) pumps and robotics.

Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.

Multiple colors allow you to color-code your line for easy identification.

This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.

Ultraviolet light won’t cause this tubing to degrade or deteriorate.

You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures.

Use this general purpose tubing with a variety of chemicals.

Use this resilient tubing in high-temperature chemical applications up to 400° F.

Cold temperatures pose no problems for this tubing—it stays strong and flexible, even when temperatures drop to -100° F.

An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.

Not only can this tubing handle the highest temperatures of all our soft tubing for food, beverage, and dairy, it also has superior abrasion and crush resistance. Use in applications up to 450° F.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.

The smooth, nonabsorbing interior on this tubing resists material buildup, so it is easy to clean.

This tubing can handle continuous bending and flexing in applications requiring movement, such as metering (peristaltic) pumps and robotics.

This tubing is soft enough to handle continuous bending and flexing, yet tough enough to resist tearing and abrasion.

Not only is this tubing cured with platinum and free of plasticizers like DEHP, it can handle higher temperatures than any of our other high-purity tubing. Use in applications up to 450° F.

With hard walls and the ability to handle extreme temperatures, this tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.