The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance up to the maximum temperature.

For technical drawings and 3-D models, click on a part number.

Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.

For technical drawings and 3-D models, click on a part number.

Fabricate containers, tanks, and lenses for light fixtures with these scratch- and UV-resistant cast acrylic tubes. Cast acrylic, which is comparable to Lucite and Plexiglas® Acrylic, is easier to machine than extruded acrylic. This material stands up to outdoor use better than polycarbonate and maintains clarity over time.

Tightly braided nylon fibers give this sleeving excellent abrasion resistance. As it wears, the fibers frizz and make the outer wall thicker for improved protection. The interior is smooth to reduce snags during installation. It meets Mine Safety and Health Administration (MSHA) standards for fire protection in mines. Because this sleeving is non-expandable, it does not stretch, so it’s best for applications where you know the exact diameter of the items you need to protect.

Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint.

Slit tubes have an adhesive strip closure.

Even at high temperatures, these tubes remain flexible to stretch over components without tearing. They restrict absorption of water, air, and gas and are typically used on hot and cold water lines and electrical components.

Less flexible than rubber foam, this insulation restricts absorption of water, air, and gas. It is typically used in plumbing applications. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint.

Slit tubes have an adhesive strip closure.

Melamine has a lightweight construction that allows quick and easy installation. Use on cold and hot water piping and with refrigeration systems. Insulation has an all-service jacket (ASJ) made of kraft paper with an adhesive strip closure. Seal seams with silicone sealant and join lengths with tape (both sold separately).

These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 (Class 100) clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems. The jacket has an adhesive strip closure. Seal seams with a silicone sealant and join lengths with tape (both sold separately).

Very rigid with a 0% water absorption rate, this insulation is unaffected by corrosive environments, organic solvents, and most acids. It is typically used in chemical-processing systems and underground lines. Insulation is flame resistant, meeting ASTM E84 0/0 for flame and smoke. Seal with tape (sold separately). Outdoor and underground use require metal jacketing (sold separately).

Tubes have a kraft paper jacket with an adhesive strip for sealing.

This common insulation material is typically used on hot and cold water lines and in process piping. To use outdoors, add metal jacketing.

Tubes, elbows, and tees are formed to provide the best fit on pipe and are the easiest to install. If your pipe is larger than the sizes we offer, choose a sheet/strip.

Tubes have an all-service jacket (ASJ) made of kraft paper with an adhesive strip closure. Seal with reinforced insulation tape (sold separately).

Elbows and tees with PVC jacketing seal using reinforced HVAC tape (sold separately).

Hook-and-loop fasteners make it easy to install, remove, and reuse this flexible insulation. Use on steam, hot water, and process pipes and fittings.