Use this tubing in high-temperature applications up to 390° F.

Stretch it, bend it, compress it – this tubing will spring back to its original shape.

This tubing can handle continuous bending and flexing in applications requiring movement, such as metering (peristaltic) pumps and robotics.

Thick walls give this tubing excellent abrasion resistance.

The lightweight, spongy walls provide thermal insulation, so the tubing won’t produce condensation when cold air or fluid runs through it.

With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.

Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.

This tubing maintains its flexibility, even when temperatures drop to -100° F.

Static electricity will not build up in this tubing, so you can use it near sensitive equipment.

This resilient tubing won’t crack due to stress or impact.

Run chemicals through this tubing at temperatures between -450° F and 500° F.

Hard walls give this tubing excellent strength in high-pressure and vacuum applications.

Keep your work site safe and clutter free—this coiled tubing extends when you need it and retracts out of the way when you don't.

An FEP liner gives this tubing better chemical resistance than any of our other soft tubing. It also provides a smooth interior for unrestricted flow.

Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.

Cold temperatures pose no problems for this tubing—it stays strong and flexible, even when temperatures drop to -100° F.

An FEP liner gives this tubing better chemical resistance than any of our other firm tubing. It also provides a smooth interior for easy cleaning unrestricted flow.

The industry standard for general purpose food, beverage, and dairy applications, this tubing meets NSF/ANSI Standard 51 for food contact.

Silver ions are blended into the walls of this tubing to inhibit the growth of odor-causing microbes.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.

Route air, liquids, and ingredients around your food processing plants while lowering the risk of contaminating the food. Made of silicone, this tubing has a metal additive that will set off metal detectors to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs.

Tough and durable, this tubing resists abrasion and tearing.

Strong, yet pliable, this tubing is good for gradual bends and can handle repeated flexing.

With the best oil resistance of all our fuel and lubricant tubing, this tubing won’t deteriorate or become brittle when exposed to oil—even with long-term use.

This tubing can handle the highest temperatures of all of our fuel and lubricant tubing. Use it in applications up to 450° F.

The highest purity soft tubing we offer, this tubing is bagged in a clean room to prevent dirt and moisture from contaminating the inside. It is cured with platinum and is made with a nonleaching plasticizer that won’t impart tastes or odors to the fluid running through it.

With hard walls and the ability to handle extreme temperatures, this tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it.

Supply air to two power tools without worrying about your lines getting tangled.

Made of nylon, this hose is lighter and easier to maneuver than rubber hydraulic hose.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Rated for temperatures down to -450° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

Protectively sheath materials, such as thermocouples, that move between hot and cold environments. Similar to nonporous alumina tubes, air and gas cannot pass through these mullite tubes.

Tight braiding makes this sleeving resistant to fraying when cut with scissors. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

This sleeving withstands temperatures over 1000°F, such as in refineries.

Wrap this sleeving around cable, cords and wires to protect them and to form bundles.

Protect cables, cords, and wire and form them into bundles in your food-processing plant while lowering the risk of contaminating the food.