How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Plastic and Rubber Tubing
More
About Metal Tubing
More
About Hose
More
Selecting Clamps Using Pipe, Conduit, or Tubing Trade Size
More
Crack-Resistant Firm Plastic Tubing for Food and Beverage
This tubing offers superior impact and crack resistance—even at low temperatures. Made of FDA listed materials, it is suitable for use with food and beverage. It is made without plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through it. Tubing is semi-flexible, so it is good for gradual bends.
Polyethylene tubing can withstand lower temperatures and higher pressures than EVA tubing.
Semi-clear tubing gives you a limited view inside the line.
Smooth-Bore Seamless Stainless Steel Tubing
Seamless construction with no weld bead gives this tubing an interior with unrestricted flow. It is stronger than welded tubing and can be flared without splitting.
316 stainless steel offers excellent corrosion resistance.
Tubing that meets ASTM specifications adheres to international standards for dimensions and materials.
- Temperature Range: -325° to 1500° F
- Bending Method: Tube Bender
- For Use With: Hydraulic Fluid, Oil, Water, Natural Gas, Air
- Compatible Tubing Fittings: see table
Tube Supports for Brass Compression Tube Fittings for Air and Water
Use these sleeves with brass compression nuts and fittings to create a seal on plastic and rubber tubing. They are brass, so they won’t damage tubing.
- Temperature Range: -75° to 550° F
- Tubing: Use with hard or firm (Rockwell 15T 1-15T 60) nylon plastic, polyethylene plastic, polypropylene plastic, or polyurethane rubber
For Tube, mm | |||||
|---|---|---|---|---|---|
| OD | ID | Tube Support Material | Max. Pressure | Each | |
| 16 | 13 | Brass | 1300 psi @ 72° F | 00000000 | 00000 |
Plastic Barbed Tube Fittings for Air and Water
Fittings have barbs that grip onto tubing.
Acetal fittings won’t absorb water and lose strength, even in high-humidity environments.
- Temperature Range: Nylon: 32° to 140° F
Acetal: -40° to 175° F - Tubing: Nylon: Use with firm or soft (Durometer 45A-80A) polyurethane rubber or PVC plastic
Acetal: Use with firm or soft (Durometer 40A-80A) polyurethane rubber or PVC plastic
| For Tube ID | Material | Color | Clarity | Max. Pressure | Pkg. Qty. | Pkg. | |
| 13mm | Acetal Plastic | White | Semi-Clear | 145 psi @ 72° F | 10 | 00000000 | 000000 |
- Temperature Range: Nylon: 32° to 140° F
Acetal: -40° to 175° F - Tubing: Nylon: Use with firm or soft (Durometer 45A-80A) polyurethane rubber or PVC plastic
Acetal: Use with firm or soft (Durometer 40A-80A) polyurethane rubber or PVC plastic
| For Tube ID | Material | Color | Clarity | Max. Pressure | Pkg. Qty. | Pkg. | |
| 13mm | Acetal Plastic | White | Semi-Clear | 145 psi @ 72° F | 10 | 00000000 | 000000 |
- Temperature Range: -40° to 175° F
- Tubing: Use with firm or soft (Durometer 40A-80A) polyurethane rubber or PVC plastic
Inline tees are also known as branch tees.
| For Tube ID (A) | For Tube ID (B) | Material | Color | Clarity | Maximum Pressure | Pkg. Qty. | Pkg. | |
| 10mm | 13mm | Acetal Plastic | White | Semi-Clear | 145 psi @ 72° F | 10 | 00000000 | 000000 |
- Temperature Range: Nylon: 32° to 140° F
Acetal: -40° to 175° F - Tubing: Nylon: Use with firm or soft (Durometer 45A-80A) polyurethane rubber or PVC plastic
Acetal: Use with firm or soft (Durometer 40A-80A) polyurethane rubber or PVC plastic
| For Tube ID | Material | Color | Clarity | Max. Pressure | Pkg. Qty. | Pkg. | |
| 13mm | Acetal Plastic | White | Semi-Clear | 145 psi @ 72° F | 10 | 00000000 | 000000 |
- Temperature Range: Nylon: 32° to 140° F
Acetal: -40° to 175° F - Tubing: Nylon: Use with firm or soft (Durometer 45A-80A) polyurethane rubber or PVC plastic
Acetal: Use with firm or soft (Durometer 40A-80A) polyurethane rubber or PVC plastic
| For Tube ID | Material | Color | Clarity | Max. Pressure | Pkg. Qty. | Pkg. | |
| 13mm | Acetal Plastic | White | Semi-Clear | 145 psi @ 72° F | 10 | 00000000 | 000000 |
Air Hose
Attach barbed fittings to this hose for use in low-pressure air applications. Hose has a smooth interior for unrestricted flow. It is reinforced with yarn for good strength. It won’t degrade when exposed to ozone or UV light.
Buna-N rubber hose has good abrasion and tear resistance.
Medium-Pressure Chemical Hose
Yarn reinforcement gives this hose good strength under pressure.
Buna-N hose has a slightly wider temperature range than nylon hose. Use it with diesel fuel, gasoline, and mineral spirits.
Metal Barbed Hose Fittings for Air and Water
Slide the barbed end into rubber hose and secure with the appropriate clamp or crimp-on hose ferrule.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. Plain brass fittings have good corrosion resistance. Nickel-plated brass fittings resist corrosion better than plain brass fittings.
Aluminum fittings are lighter in weight than other metal fittings. They have good corrosion resistance.
Stainless steel fittings have very good corrosion resistance. 303 stainless steel fittings won’t rust when exposed to water, making them good for areas that require frequent cleanings. Fittings with a threaded end are also known as hose nipples.
Hose connectors are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose.
Metric, UN/UNF (SAE Straight), and BSPP male threads with gasket protect against leaks.
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Pipe Size | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 13mm | 1/4 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 000000 |
| 13mm | 1/2 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp | SAE J476 | 1 | 0000000 | 00000 |
Nickel-Plated Brass | |||||||||
| 13mm | 1/2 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
Aluminum | |||||||||
| 13mm | 1/2 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -20° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
303 Stainless Steel | |||||||||
| 13mm | 1/4 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
| 13mm | 1/2 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
UN/UNF (SAE Straight)
Male Threads with Gasket
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: Bronze Fittings: ASTM B584
| For Hose ID | Pipe Size | Gasket Material | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Pkg. Qty. | Pkg. | |
Brass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 13mm | 1/4 | Buna-N Rubber | 300 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 000000 |
| 13mm | 1/2 | Buna-N Rubber | 300 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
303 Stainless Steel | |||||||||
| 13mm | 1/4 | Buna-N Rubber | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
| 13mm | 1/2 | Buna-N Rubber | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Pipe Size | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 13mm | 1/2 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp, Crimp-On Hose Ferrule | SAE J476 | 1 | 0000000 | 000000 |
Aluminum | |||||||||
| 13mm | 1/4 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -20° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
303 Stainless Steel | |||||||||
| 13mm | 1/2 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
UN/UNF (SAE Straight)
Male Threads with Gasket
- Maximum Pressure: See table
- Maximum Vacuum: 27 in. of Hg @ 72° F
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Thread Size | Gasket Material | Max. Pressure | Temperature Range, °F | Attachment Type | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 13mm | M10 × 1 mm | __ | 250 psi @ 72° F | -40° to 160° | Worm-Drive Clamp, Crimp-On Hose Ferrule | SAE J476 | 1 | 0000000 | 000000 |
| 13mm | M12 × 1.5 mm | Buna-N Rubber | 250 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
| 13mm | M16 × 1.5 mm | Buna-N Rubber | 250 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
Nickel-Plated Brass | |||||||||
| 13mm | M12 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
Aluminum | |||||||||
| 13mm | M16 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
303 Stainless Steel | |||||||||
| 13mm | M10 × 1 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
| 13mm | M16 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | __ | 1 | 00000000 | 00000 |
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Pipe Size | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Pkg. Qty. | Pkg. | |
Brass | ||||||||
|---|---|---|---|---|---|---|---|---|
| 13mm | 1/2 | 300 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 000000 |
303 Stainless Steel | ||||||||
| 13mm | 1/4 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
| 13mm | 1/2 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
- Maximum Pressure: See table
- Maximum Vacuum: 27 in. of Hg @ 72° F
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Pipe Size | Max. Pressure | Temperature Range, °F | Attachment Type | Pkg. Qty. | Pkg. | |
Brass | |||||||
|---|---|---|---|---|---|---|---|
| 13mm | 1/2 | 300 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 000000 |
- Maximum Pressure: See table
- Maximum Vacuum: 27 in. of Hg @ 72° F
- Temperature Range: -30° to 200° F
- Attachment Type: Use Crimp-On Hose Ferrules, Worm-Drive Clamps or Band-and-Buckle Clamps
| For Hose ID | Pipe Size | Max. Pressure | Pkg. Qty. | Pkg. | |
Brass | |||||
|---|---|---|---|---|---|
| 13mm | 1/2 | 300 psi @ 72° F | 1 | 00000000 | 000000 |
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Pkg. Qty. | Pkg. | |
303 Stainless Steel | |||||||
|---|---|---|---|---|---|---|---|
| 13mm | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 000000 |
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
For Hose ID | ||||||||
|---|---|---|---|---|---|---|---|---|
| (A) | (B) | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Pkg. Qty. | Pkg. | |
Brass | ||||||||
| 13mm | 8mm | 300 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 000000 |
| 13mm | 10mm | 300 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
Aluminum | ||||||||
| 13mm | 10mm | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
303 Stainless Steel | ||||||||
| 13mm | 10mm | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
Plastic Barbed Hose Fittings for Water
Made of polypropylene, these fittings have good corrosion and abrasion resistance, and are lighter in weight than metal barbed hose fittings. Slide the barbed end into plastic or rubber hose and secure with a clamp.
Fittings with a threaded end are also known as hose nipples.
Hose connectors are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose.
- Maximum Pressure: 200 psi @ 72° F
- Temperature Range: 35° to 190° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
- Maximum Pressure: Inch: See table
- Temperature Range: Inch: 10° to 150° F; Metric: 30° to 190° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
| For Hose ID | Color | Max. Pressure | Each | |
Polypropylene Plastic | ||||
|---|---|---|---|---|
| 13mm | Black | 200 psi @ 72° F | 00000000 | 00000 |
- Maximum Pressure: Inch: 150 psi @ 72° F; Metric 200 psi @ 72° F
- Temperature Range: Inch: 10° to 150° F; Metric: 35° to 190° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
Hose × Male
Threaded Pipe
- Maximum Pressure: 200 psi @ 72° F
- Temperature Range: 35° to 190° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
| For Hose ID | Pipe Size | Color | Each | |
Polypropylene Plastic | ||||
|---|---|---|---|---|
| 13mm | 1/2 | Black | 00000000 | 00000 |
- Maximum Pressure: Inch: 150 psi @ 72° F; Metric: 200 psi @ 72° F
- Temperature Range: Inch: 10° to 150° F; Metric: 35° to 190° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
- Maximum Pressure: Inch: 150 psi @ 72° F; Metric: 200 psi @72° F
- Temperature Range: Inch: 10° to 150° F; Metric: 35° to 190° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
| For Hose ID | Color | Each | |
Polypropylene Plastic | |||
|---|---|---|---|
| 13mm | Black | 00000000 | 00000 |
- Maximum Pressure: Inch: 150 psi @ 72° F; Metric: 200 psi @ 72° F
- Temperature Range: Inch: 10° to 150° F; Metric: 35° to 190° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
For Hose ID | ||||
|---|---|---|---|---|
| (A) | (B) | Color | Each | |
Polypropylene Plastic | ||||
| 13mm | 6mm | Black | 00000000 | 00000 |
Metal Barbed Hose Fittings for Chemicals and Petroleum
Made of stainless steel, these fittings stand up to a wide variety of chemicals, as well as fuels, gasoline, and oils. To connect, slide the barbed end into plastic or rubber hose and secure with a clamp.
Adapters are also known as hose nipples; they adapt a barbed end to a threaded end.
Connectors and reducers are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose.
Metric and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks.
- For Use With: See table
- Maximum Pressure: See table
- Temperature Range: See table
- Attachment Type: Use Band-and-Buckle Clamps
| For Hose ID | Pipe Size | Max. Pressure | Temperature Range, °F | For Use With | Each | |
316 Stainless Steel | ||||||
|---|---|---|---|---|---|---|
| 13mm | 1/2 | 300 psi @ 72° F | -40° to 300° | Acetone, Boric Acid, Citric Acid, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 000000 |
- For Use With: Acetone, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil
- Maximum Pressure: See table
- Temperature Range: -40° to 300° F
- Attachment Type: Use Band-and-Buckle Clamps
| For Hose ID, mm | Pipe Size | Gasket Material | Max. Pressure | Each | |
316 Stainless Steel | |||||
|---|---|---|---|---|---|
| 13 | 1/2 | Fluoroelastomer Rubber | 300 psi @ 72° F | 000000000 | 000000 |
- For Use With: See table
- Maximum Pressure: See table
- Temperature Range: -40° to 300° F
- Attachment Type: Use Band-and-Buckle Clamps
| For Hose ID | Pipe Size | Max. Pressure | For Use With | Each | |
316 Stainless Steel | |||||
|---|---|---|---|---|---|
| 13mm | 1/2 | 250 psi @ 72° F | Acetone, Boric Acid, Citric Acid, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 000000 |
- For Use With: See table
- Maximum Pressure: See table
- Temperature Range: -40° to 300° F
- Attachment Type: Use Band-and-Buckle Clamps
Thread | |||||||
|---|---|---|---|---|---|---|---|
| For Hose ID | Size | Pitch, mm | Gasket Material | Max. Pressure | For Use With | Each | |
316 Stainless Steel | |||||||
| 13mm | M10 | 1 | Viton® Fluoroelastomer Rubber | 250 psi @ 72° F | Acetone, Boric Acid, Citric Acid, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 000000 |
| 13mm | M16 | 1.5 | Fluoroelastomer Rubber | 125 psi @ 72° F | Acetone, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 00000 |
- For Use With: See table
- Maximum Pressure: See table
- Temperature Range: -40° to 300° F
- Attachment Type: Use Band-and-Buckle Clamps
| For Hose ID | Pipe Size | Max. Pressure | For Use With | Each | |
316 Stainless Steel | |||||
|---|---|---|---|---|---|
| 13mm | 1/2 | 250 psi @ 72° F | Acetone, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 000000 |
- For Use With: See table
- Maximum Pressure: 300psi @ 72° F
- Temperature Range: See table
- Attachment Type: Use Band-and-Buckle Clamps
| For Hose ID | Temperature Range, °F | For Use With | Each | |
316 Stainless Steel | ||||
|---|---|---|---|---|
| 13mm | -40° to 300° | Acetone, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 000000 |
Metal Garden Hose Fittings
Connect these fittings to rubber or plastic garden hose for a variety of water supply applications.
Brass fittings have good corrosion resistance and are softer than other metal fittings, so they’re easier to thread together. Fittings with a barbed end are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose. Fittings with a clamp-on barbed end slide into hose and secure with a clamp.
- Attachment Type: Use Worm-Drive Clamps
| For Hose ID | Garden Hose Trade Size | Lg. | Each | |
Brass | ||||
|---|---|---|---|---|
| 13mm | 3/4 | 1 11/16" | 000000000 | 000000 |
- Attachment Type: Use Worm-Drive Clamps
| For Hose ID | Garden Hose Trade Size | Lg. | Each | |
Brass | ||||
|---|---|---|---|---|
| 13mm | 3/4 | 1 23/32" | 000000000 | 000000 |
Polished Multipurpose 304 Stainless Steel
Polished to either a brushed or mirror-like finish, this material is widely used to fabricate decorative enclosures and industrial workstations. The sheets, strips, bars, and adhesive-back foil are covered with a protective peel-off film. 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Brushed #4 is often called a satin finish; it’s similar to a #3 finish, except the grain lines are finer. Rectangular and round tubes are polished on the outside.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength:
Inch Sizes: Not Rated
Metric Sizes: 24,000 psi - Hardness:
Inch Sizes: Rockwell B80 (Medium)
Metric Sizes: Rockwell B70 (Medium) - Heat Treatment: See table
- Heat Treatable: No
- Specifications Met:
Inch Sizes: ASTM A554
Metric Sizes: ASTM A269
Ultra-High-Temperature Quartz Glass Tubes
- Color: Clear
- Max. Temperature: 2000° F
- Fabrication: Annealed
Blistering temperatures won’t melt these quartz tubes, and rapid temperature shifts won’t cause them to crack. Even tougher than borosilicate, they can be used in furnaces and ovens heated up to 2000° F. These highly pure tubes are often used in laboratories because they won’t leach impurities into samples or contaminate chemical reactions. Quartz tubes are optically clear and have excellent UV transmission, making them ideal for UV purification systems.
12" Lg. | |||||
|---|---|---|---|---|---|
| OD | ID | Wall Thick. | Edge Fabrication | Each | |
Metric | |||||
| 15mm | 13.000mm | 1mm | Ground | 0000000 | 00000 |
Strut-Mount Vibration-Damping Routing Clamps
Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.
TPE clamps hold lines of pipe, tubing, and conduit in light duty applications without the need for fasteners or installation tools. Made from a single piece of rubber, they prevent corrosion caused by metal-to-metal contact and resist most oils, chemicals, and cleaning compounds. To install, insert the clamp into strut channel and twist it 90° to secure. Then, press material into the clamp.
Zinc-plated steel and stainless steel clamps with TPE cushion resist most oils, chemicals, and cleaning compounds. With a metal body, they provide a more secure hold than TPE clamps. Slide into strut channel and fasten the nut to secure. Stainless steel clamps are more corrosion resistant than zinc-plated steel clamps.
Polypropylene clamps are good for hydraulic applications. To install, slide into strut channel and fasten the mounting bolts into the included strut channel nuts. Clamps with 316 stainless steel top plates are more corrosion resistant than clamps with steel top plates.
Glass-filled nylon clamps with SBR cushion are good for refrigeration, HVAC, and hydraulic applications. Their plastic construction prevents corrosion caused by metal-to-metal contact. Slide into strut channel and fasten the nut to secure.
Clamps with a thumb grip have a tab on the bottom of the cushion for easy installation and removal.
Stacking clamps allow you to route multiple lines with different diameters on top of each other. They include fasteners and a plate for attaching to regular clamps or other stacking clamps. Stacking clamps cannot be used alone.
ID | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size | Lg. | Wd. | Ht. | Center Ht. | Thick. | For Strut Channel Wd. | Mounting Fasteners Included | Temp. Range, °F | Features | Each | |
Zinc-Plated Steel with TPE Rubber Cushion | |||||||||||||
| 1/2" | 13 | 1/8 | 15/16" | 1 1/4" | 2" | 3/8" | 1/16" | 1 5/8" | Yes | -50° to 275° | Thumb Grip | 00000000 | 00000 |
304 Stainless Steel with TPE Rubber Cushion | |||||||||||||
| 1/2" | 13 | 1/8 | 15/16" | 1 1/4" | 2" | 3/8" | 1/16" | 1 5/8" | Yes | -50° to 275° | Thumb Grip | 00000000 | 0000 |
316 Stainless Steel with TPE Rubber Cushion | |||||||||||||
| 1/2" | 13 | 1/8 | 7/8" | 1 1/4" | 2" | 3/8" | 5/64" | 1 5/8" | Yes | -50° to 270° | __ | 00000000 | 0000 |
Nylon Plastic with SBR Rubber Cushion | |||||||||||||
| 1/2" | 13 | 1/8 | 1 1/2" | 1 5/8" | 3 3/8" | 1 1/4" | 1/8" | 1 5/8" | Yes | -50° to 250° | __ | 000000 | 0000 |
Shown with Stacking
Clamp (Sold Separately)
Clamps | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ID | Stacking Clamps | |||||||||||||||
| Inch | Metric, mm | For Pipe Size | Capacity | Lg. | Wd. | Ht. | Center Ht. | Thick. | For Strut Channel Wd. | Mounting Fasteners Included | For Max. Pressure, psi | Temp. Range, °F | Each | Each | ||
TPE Rubber | ||||||||||||||||
| 1/2" | 13 | 1/8 | 75 lbs. | 1 1/2" | 1 3/8" | 1 13/16" | 7/16" | 3/32" | 1 5/8" | __ | __ | -50° to 275° | 000000000 | 00000 | 000000 | 00 |
Polypropylene Plastic with Zinc-Plated Steel Top Plate | ||||||||||||||||
| 1/2" | 13 | 1/8 | Not Rated | 1 5/8" | 1 3/16" | 1 15/16" | 5/8" | __ | 1 5/8" | Yes | 2,000 | -20° to 190° | 0000000 | 0000 | 00000000 | 00000 |
Polypropylene Plastic with 316 Stainless Steel Top Plate | ||||||||||||||||
| 1/2" | 13 | 1/8 | Not Rated | 1 5/8" | 1 3/16" | 1 15/16" | 5/8" | __ | 1 5/8" | Yes | 2,000 | -20° to 190° | 0000000 | 00000 | 000000 | 00 |
Low-Profile Strut-Mount Metal Routing Clamps
For routing pipe, tubing, and conduit in areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top. Slide a bolt (sold separately) through the mounting hole and into a strut channel nut (sold separately) to secure. All are zinc-plated steel for good corrosion resistance.
ID | Mounting | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size | Lg. | Wd. | Thick. | For Strut Channel Wd. | Ctr.-to-Ctr. | Fasteners Included | Hole Dia. | Each | |
Zinc-Plated Steel | |||||||||||
| 1/2" | 13 | 1/8 | 1 7/16" | 1 5/8" | 1/16" | 1 5/8" | 5/8" | No | 1/4" | 0000000 | 00000 |
Strut-Mount Metal Routing Clamps for Insulated Pipe
Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion. To install, slide the clamp into the strut channel, insert the insulated pipe, and tighten the clamping screw to secure. All are zinc-plated steel and TPO for good corrosion resistance.
ID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Insulation Thick. | For Pipe Size | Capacity | Lg. | Wd. | Ht. | Center Ht. | Thick. | For Strut Channel Wd. | Screw Material | Nut Material | Temp. Range, °F | Specifications Met | Each | |
Zinc-Plated Steel with TPO Plastic Cushion | ||||||||||||||||
| 1/2" | 13 | 1/2" | 1/8 | 230 lbs. | 1 5/8" | 2" | 3 3/8" | 3/4" | 5/64" | 1 5/8" | Steel | Steel | -60° to 225° | UL 2043 | 00000000 | 00000 |
| 1/2" | 13 | 3/4" | __ | 230 lbs. | 2 1/16" | 2" | 3 13/16" | 1" | 1/8" | 1 5/8" | Steel | Steel | -60° to 225° | UL 2043 | 00000000 | 0000 |
| 1/2" | 13 | 1" | 1/8 | 230 lbs. | 2 5/8" | 2" | 4 5/16" | 1 1/4" | 1/8" | 1 5/8" | Steel | Steel | -60° to 225° | UL 2043 | 00000000 | 00000 |
Strut-Mount Metal Routing Clamps
Route pipe, tubing, and conduit across strut channel. To install, slide the clamp into the strut channel and tighten the clamping screw to secure.
Zinc-plated steel clamps have good corrosion resistance. Copper-plated steel clamps resist corrosion when used with copper tubing.
ID | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size | Capacity, lbs. | Lg. | Wd. | Ht. | Thick. | For Strut Channel Wd. | Mounting Fasteners Included | Screw Material | Nut Material | Each | |
Zinc-Plated Steel | |||||||||||||
| 1/2" | 13 | 1/8 | 400 | 5/8" | 1 1/4" | 1 15/16" | 1/16" | 1 5/8" | Yes | Steel | Steel | 00000000 | 00000 |
Copper-Plated Steel | |||||||||||||
| 1/2" | 13 | 1/8 | 400 | 5/8" | 1 1/4" | 1 15/16" | 1/16" | 1 5/8" | Yes | Steel | Steel | 0000000 | 0000 |