A polyester braid is embedded into the walls of this tubing, giving it the strength to withstand higher pressures than other soft tubing for air and water. Use in applications up to 350 psi.

Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.

With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.

Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.

The corrugated design allows this tubing to extend and compress just like an accordion.

With a diameter of 2" or larger, this tubing has the girth to handle high volumes of acids and other harsh substances.

The industry standard for general purpose food, beverage, and dairy applications, this tubing meets NSF/ANSI Standard 51 for food contact.

With a diameter of 2" or larger, this tubing has the girth to handle high-volume beverage and bulk food processing applications.

This tubing offers superior impact and crack resistance—even at low temperatures.

The strongest nonmetal duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.

Connect to high-vacuum pumps to route exhaust fumes out of your work area. Also known as roughing hose.

Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as axles, shafts, collets, and die holders. It resists fracturing from repeated stress.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

An anodized coating forms a bond to the inside, outside, and ends of these tubes to improve wear and corrosion resistance.

From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.

An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F.

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

This extruded acrylic offers similar performance as cast acrylic at a lower cost.

PETG can be formed into complex shapes without sacrificing durability.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.

A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.

This sleeving withstands temperatures up to 390°F and is often used to insulate connections in transformers and relays. It prevents electricity and heat from dissipating from wire and cable.

Made from thicker and denser fiberglass than standard spark-resistant sleeving, this sleeving is more abrasion resistant and provides better insulation. The silicone rubber coating protects against sparks and molten metal splash.

Braided from thick plastic strands, this sleeving has excellent abrasion resistance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Tested to meet MIL-STD-202, this sleeving meets performance standards for flame retardance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Reduce the likelihood of slipping in high-traffic areas. This sleeving has thick, nonslip fibers that create friction so it doesn’t slide when you step on it. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Unlike fiberglass and silica, this sleeving won't irritate skin, so it's easier to handle. It has a temperature rating of 1100° F or higher.

A blend of Aramid and fiberglass gives this sleeving excellent abrasion resistance. It can withstand temperatures up to 650° F

A slit along the length makes this sleeving easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

A strip of hook-and-loop creates a strong seal along the entire length of this sleeving, yet it can be opened at any point to access contents. Use it to wrap around wire, cable, or hose without disconnecting them.

Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Coated with PVC, this polyester sleeving resists chemicals and solvents. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Rated for temperatures down to -450° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

The strongest composite we offer, carbon fiber is comparable in strength to 6061 aluminum yet lighter in weight.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.