Choose a Category
Clear All
System of Measurement System of Measurement |
|---|
|
ID ID | Show |
|---|
|
ID ID | Hide |
|---|
Shape Shape |
|---|
 | Round Tube |
Clarity Clarity |
|---|
 | Clear |
Performance Properties Performance Properties |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Specifications Met Specifications Met |
|---|
|
Density Density |
|---|
|
Flexibility Flexibility |
|---|
 | Flexible |
 | Semi-Rigid |
Comparable To Comparable To |
|---|
|
|
Dielectric Strength Dielectric Strength |
|---|
|
Electrical Insulation Rating Electrical Insulation Rating |
|---|
|
Flexural Modulus Flexural Modulus |
|---|
|
For Use Outdoors For Use Outdoors |
|---|
|
For Use With For Use With |
|---|
Friction Rating Friction Rating |
|---|
|
About Plastic
More
About Selecting Thermal Insulation
More
Clear Scratch- and UV-Resistant Cast Acrylic Tubes
- Color: Clear
- Temperature Range: 0° to 150° F
- Tensile Strength: 10,000-11,250 psi (Good)
- Impact Strength: 0.3-0.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell M94-M100 (Hard)
- For Use Outdoors: Yes
- Specifications Met: Made of FDA Listed Material, UL 94HB
Fabricate containers, tanks, and lenses for light fixtures with these scratch- and UV-resistant cast acrylic tubes. Cast acrylic, which is comparable to Lucite and Plexiglas® Acrylic, is easier to machine than extruded acrylic. This material stands up to outdoor use better than polycarbonate and maintains clarity over time.
Flexible Rubber Foam Pipe Insulation
Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint.
Slit tubes have an adhesive strip closure.
Unslit Tubes
Unslit Tube
- Temperature Range: -295° to 220° F
- Heat Flow Rate: 0.25 Btu @ 75° F
- Density: 4.5 lbs./cu. ft.
- Color: Black
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534
Slit Tubes
Slit Tube
- Temperature Range: -295° to 180° F
- Heat Flow Rate: 0.25 Btu @ 75° F
- Density: 4.5 lbs./cu. ft.
- Color: Black
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534
90° Elbows
Elbow
- Temperature Range: -295° to 220° F
- Heat Flow Rate: 0.25 Btu @ 75° F
- Density: 4.5 lbs./cu. ft.
- Color: Black
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534
Tees
Tee
- Temperature Range: -295° to 220° F
- Heat Flow Rate: 0.25 Btu @ 75° F
- Density: 4.5 lbs./cu. ft.
- Color: Black
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C534
Economical Flexible Polyethylene Foam Pipe Insulation
Slit Tubes
Slit Tube
- Temperature Range: See table
- Heat Flow Rate: 0.25 Btu @ 75° F
- Density: 1.5 lbs./cu. ft.
- Color: See table
- Specifications Met: See table
| ID | For Pipe Size | For Copper Tube Size | Lg., ft. | Flexibility | Specifications Met | R Value | Each | |
3/8" Wall Thick. | ||||||||
|---|---|---|---|---|---|---|---|---|
-295° to 200° F Temperature Range—Black | ||||||||
| 3 5/8" | 3 | 3 1/2 | 6 | Flexible | ASTM E84 25/50 for Flame and Smoke | 1.5 | 000000000 | 000000 |
1/2" Wall Thick. | ||||||||
-295° to 200° F Temperature Range—Black | ||||||||
| 3 5/8" | 3 | 3 1/2 | 6 | Flexible | ASTM E84 25/50 for Flame and Smoke | 2 | 000000000 | 00000 |
3/4" Wall Thick. | ||||||||
-295° to 200° F Temperature Range—Black | ||||||||
| 3 5/8" | 3 | 3 1/2 | 6 | Flexible | ASTM E84 25/50 for Flame and Smoke | 3 | 000000000 | 00000 |
The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)