We will reply to your message within an hour.
This general purpose tubing is the industry standard for air and water applications.
This tubing won’t degrade when exposed to the damaging effects of UV light.
Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.
Thick walls give this tubing excellent abrasion resistance.
Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.
With a diameter of 2" or larger, this tubing has the girth to handle high volumes of acids and other harsh substances.
An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.
The industry standard for general purpose food, beverage, and dairy applications, this tubing meets NSF/ANSI Standard 51 for food contact.
With a diameter of 2" or larger, this tubing has the girth to handle high-volume beverage and bulk food processing applications.
Pipe has a snap-together design that allows you to quickly connect to fittings with no cement required. It is typically used in gravity-flow drainage applications.
Hose is SBR rubber, so it stands up to the wear and tear of daily use.
Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.
Made of PVC, this hose is economical yet durable enough to handle vacuum up to 28 Hg.
Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.
Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.
Drain water from one place to another. Hose lays flat and folds up for carrying and storage.
Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.
Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.
Step on this hose and it springs back to its original shape.
You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.
Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.
Commonly known as radiator hose, this hose is for low-pressure coolant applications.
With a tighter bend radius than other coolant hose, this hose can twist and turn around equipment.
The PVC construction means this hose won’t impart tastes or odors on your product. Use with juice, milk, meat, poultry, and syrup.
The super-smooth interior of this hose prevents product buildup. Use hose with juice, milk, and syrup.
A tough EPDM rubber cover protects the hose from damage. Use hose with juice, meat, milk, poultry, and syrup.
Strong yarn reinforces this hose to give it a higher pressure rating than other food and beverage hose. Also known as brewer’s and vintner’s hose, the hose material is FDA compliant.
Hose is clear PVC so you can easily monitor flow. Use it with flour, grain, rice, and sugar.
The most durable dry-food hose we offer, this hose is made of gum rubber for excellent resistance to cuts and tears.
Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.
With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.
More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63.
Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures.
Increase or decrease the hose diameter by up to 25% with a two-handed twist.
Form elbows and bends with this hose and it will hold its shape without support.
Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.
With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.
Let go of this hose and it will spring back out of your way.
If you’re tight on storage space, this hose compresses down to a small size.
Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.
Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.
Alumina-coated glass fabric withstands extreme temperatures like stainless steel, but is much more flexible.
Vent smoke, water-based paint fumes, and welding fumes with this hose that gives you a clear view inside your line.
Unlike other duct hose that has a metal spiral, this hose has a plastic spiral that will not rust.
A nonstick PTFE liner gives this hose the ability to handle corrosive fumes such as smoke, paint fumes, hydrochloric acid fumes, and toluene fumes.
Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over.
Blow jagged, abrasive materials through this hose without worrying about punctures or tears. It’s made of extra--thick TPU (thermoplastic polyurethane).
Formed by metal interlocked strips, this hose has the strength to stand up to sharp, abrasive materials.
SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.
Hose has a plastic spiral that acts as a wear strip to protect against damage.
The strongest nonmetal duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.
A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.
Tough, resilient EVA (ethylene vinyl acetate) offers excellent impact resistance and is long lasting.
A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.
The neoprene coating on this hose withstands continuous motion without weakening.
Hose meets UL 94 V-2 for flame retardance.
Lightweight, yet strong, this aluminum hose bends and maintains its shape without support.
Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.
Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.
A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.
The neoprene coating on this hose holds up under high heat.
The smooth interior prevents dust from getting trapped and building up inside the hose.
Hose has a flexible plastic spiral that bounces back to its original shape when stepped on.
This white hose makes dirt and other contaminants easy to spot.
In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.
This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.
A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).
The small bend radius makes this hose easy to wrap around corners and install in tight spaces.
The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.
Bend this hose in any direction and it will hold its shape without support.
Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.
Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.
A metalized polyester cover reflects heat so the temperature inside the hose won’t rise.
The most compressible hose we offer, this duct hose collapses to 5% of its length for easy storage.
Step on or drive over this hose without causing damage.
A smooth interior allows for unrestricted flow and makes this hose easy to clean.
Run water, mist, oil, and other liquids through this hose.
A small bend radius lets this hose twist and turn to fit in cramped spaces.
Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.
Also known as chrome-moly steel, this versatile 4140 alloy steel is used for a wide range of parts, such as axles, shafts, collets, and die holders. It resists fracturing from repeated stress.
Gray cast iron machines faster with less wear on cutting tools than most types of steel. It's often fabricated into gears, pulleys, rollers, and bushings.
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.
954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears. The strength of this material increases with heat treating.
Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.
An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.
Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.
This extruded acrylic offers similar performance as cast acrylic at a lower cost.
At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.
PETG can be formed into complex shapes without sacrificing durability.
This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.
The addition of MDS gives these tubes exceptional wear resistance along with a self-lubricating surface. They're made of cast nylon 6, making them easier to machine and better electrical insulators than other MDS-filled nylon tubes.
This nylon stays lubricated over time because it’s filled with oil. Use it to fabricate parts for hard-to-reach places where adding lubricants would be difficult.
A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes.
In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.
CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.
Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.
This sleeving withstands temperatures up to 390°F and is often used to insulate connections in transformers and relays. It prevents electricity and heat from dissipating from wire and cable.
A silicone rubber coating on this fiberglass sleeving protects against sparks and molten metal splash.
Made from thicker and denser fiberglass than standard spark-resistant sleeving, this sleeving is more abrasion resistant and provides better insulation. The silicone rubber coating protects against sparks and molten metal splash.
Braided from thick plastic strands, this sleeving has excellent abrasion resistance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.
This sleeving withstands temperatures over 1000°F, such as in refineries.
With a temperature rating of 1800°F or higher, this sleeving can withstand hotter temperatures than fiberglass and most ceramic.
Organize and protect the cables on your Universal Robots arm without hindering its movement.
Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.
Often used in place of aluminum for structural frames, machinery components, and robotics, these tubes are lighter in weight and almost as rigid.
A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.
Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.
Used in turbine bearings, downpipe gaskets, and other machinery, these Garolite tubes withstand heavy impacts and temperatures as high as 500° F.
Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.
Use these tubes as jackets, seals, and insulation in areas where rubbing and scraping could cause wear on rubber. They are made of polyurethane, which combines the shock-absorbing qualities of rubber with the tear resistance of plastic.
Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines.
These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 and Fed. Spec. Class 100 clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems.
Melamine has a lightweight construction that allows quick and easy installation. Use on cold and hot water piping and with refrigeration systems.
Close these tubes with a cap on each end.