About Selecting Thermal Insulation
More
About Plastic
More
About Hose
More
Coolant Hose
- Temperature Range: 0° to 210° F
- Material: Buna-N Rubber
- Color: Black with Green Stripe
- For Clamp Type: Worm Drive
Commonly known as radiator hose, this hose is for low-pressure coolant applications.
For technical drawings and 3-D models, click on a part number.
Per Ft. | ||||||
|---|---|---|---|---|---|---|
| ID | OD | Max. Pressure | Max. Continuous Lg., ft. | 1-24 | 25-Up | |
| 4 3/4" | 5 1/4" | 15 psi @ 72° F | 25 | 00000000 | 000000 | 000000 |
Multipurpose 6061 Aluminum Round Tubes
- Yield Strength: 35,000 psi
- Hardness: Brinell 95 (Soft)
- Temper: See table
- Fabrication: See table
- Specifications Met: See table
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Clear Scratch- and UV-Resistant Cast Acrylic Tubes
- Color: Clear
- Temperature Range: 0° to 150° F
- Tensile Strength: 10,000-11,250 psi (Good)
- Impact Strength: 0.3-0.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell M94-M100 (Hard)
- For Use Outdoors: Yes
- Specifications Met: See table
Fabricate containers, tanks, and lenses for light fixtures with these scratch- and UV-resistant cast acrylic tubes. Cast acrylic, which is comparable to Lucite and Plexiglas® Acrylic, is easier to machine than extruded acrylic. This material stands up to outdoor use better than polycarbonate and maintains clarity over time.
| OD | OD Tolerance | ID | Lengths, ft. | Specifications Met | Per Ft. | |
1/8" Wall Thick. | ||||||
|---|---|---|---|---|---|---|
| 5" | -0.045" to 0.045" | 4 3/4" | ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB | 00000000 | 000000 | |
1/4" Wall Thick. | ||||||
| 5 1/4" | -0.045" to 0.045" | 4 3/4" | ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB | 00000000 | 000000 | |
3/8" Wall Thick. | ||||||
| 5 1/2" | -0.045" to 0.045" | 4 3/4" | ASTM D5436, FDA Compliant 21 CFR 177.1010, UL 94 HB | 00000000 | 000000 | |
Clear Scratch- and UV-Resistant Acrylic Tubes
- Color: Clear
- Temperature Range: -40° to 180° F
- Tensile Strength; 9,195-11,030 (Good)
- Impact Strength: 0.040 ft.-lbs./in.
- Hardness: Rockwell M89-M96 (Hard)
- For Use Outdoors: Yes
- Specifications Met: UL 94 HB
When compared to cast acrylic tubes, these extruded acrylic tubes offer nearly the same performance at a fraction of the cost. Use them for sight gauges and protective covers. This scratch- and UV-resistant material stands up to outdoor use better than polycarbonate and maintains clarity over time.
| OD | OD Tolerance | ID | ID Tolerance | Lg., ft. | Each | |
1/8" Wall Thick. | ||||||
|---|---|---|---|---|---|---|
| 5" | -0.040" to 0.040" | 4 3/4" | -0.040" to 0.040" | 6 | 0000000 | 0000000 |
Clear Impact-Resistant Polycarbonate Tubes
- Color: Clear
- Temperature Range: -40° to 200° F
- Tensile Strength: 8,900-9,500 psi (Good)
- Impact Strength: 12-18 ft.-lbs./in. (Excellent)
- Hardness: Rockwell R118 (Hard)
- For Use Outdoors: No
Comparable to Lexan, Hyzod, Tuffak, and Makrolon, these polycarbonate tubes are half the weight of glass and maintain excellent impact resistance across a wide temperature range. Use them to make instrument gauge covers and display racks.
Flexible Rubber Foam Pipe Insulation
Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: See Table
- Heat Flow Rate: See Table
- Density: See Table
- Color: See Table
- Specifications Met: See Table
3/4" Wall Thick. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | For Pipe Size  | Lg., ft. | Temp. Range, °F | Heat Flow Rate | Density | Color | Flexibility | Specifications Met | R Value | Each | |
Buna-N/PVC Foam | |||||||||||
| 4 3/4" | 4 | 6 | -40° to 220° | 0.25 Btu @ 75° F | 4.5 lbs./cu. ft. | Black | Flexible | ASTM E84 25/50 for Flame and Smoke, ASTM C534 | 3 | 00000000 | 000000 |