Filter by
ID
Shape
Clarity
Material
System of Measurement
Maximum Temperature
Flexibility
Performance
Insulation Type
Density
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Flammability Rating
REACH
RoHS
Specifications Met
Minimum Temperature
Application
Comparable To
Dielectric Strength
Electrical Insulation Rating
About Selecting Thermal Insulation
More
About Plastic
More
Clear Scratch- and UV-Resistant Cast Acrylic Tubes
- Color: Clear
- Temperature Range: 0° to 150° F
- Tensile Strength: 10,000-11,250 psi (Good)
- Impact Strength: 0.3-0.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell M94-M100 (Hard)
- For Use Outdoors: Yes
- Specifications Met: See table
Fabricate containers, tanks, and lenses for light fixtures with these scratch- and UV-resistant cast acrylic tubes. Cast acrylic, which is comparable to Lucite and Plexiglas® Acrylic, is easier to machine than extruded acrylic. This material stands up to outdoor use better than polycarbonate and maintains clarity over time.
Flexible Rubber Foam Pipe Insulation
Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint.
For technical drawings and 3-D models, click on a part number.
Unslit Tubes
Unslit Tube
- Temperature Range: See Table
- Heat Flow Rate: See Table
- Density: See Table
- Color: See Table
- Specifications Met: See Table
1" Wall Thick. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | For Pipe Size  | Lg., ft. | Temp. Range, °F | Heat Flow Rate | Density | Color | Flexibility | Specifications Met | R Value | Each | |
Neoprene Foam | |||||||||||
| 4 7/8" | 4 | 6 | -40° to 220° | 0.27 Btu @ 75° F | 4 lbs./cu. ft. | Blue | Flexible | ASTM C534, UL Classified, UL 723 25/50 for Flame and Smoke | 5.5 | 00000000 | 0000000 |