This general purpose tubing is the industry standard for air and water applications.

A polyester braid is embedded into the walls of this tubing, giving it the strength to withstand higher pressures than other soft tubing for air and water. Use in applications up to 350 psi.

This tubing won’t degrade when exposed to the damaging effects of UV light.

Multiple colors allow you to color-code your lines for easy identification.

Multiple colors allow you to color-code your line for easy identification.

A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.

Ultraviolet light won’t cause this tubing to degrade or deteriorate.

Hard walls give this tubing excellent strength in high-pressure and vacuum applications.

Use this general purpose tubing with a variety of chemicals.

Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.

Cold temperatures pose no problems for this tubing—it stays strong and flexible, even when temperatures drop to -100° F.

An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.

Silver ions are blended into the walls of this tubing to inhibit the growth of odor-causing microbes.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.

This tubing offers superior impact and crack resistance—even at low temperatures.

This tubing can handle continuous bending and flexing in applications requiring movement, such as metering (peristaltic) pumps and robotics.

The industry standard for fuel and lubricant applications, this tubing can be used intermittently with petroleum-based products without becoming hard or brittle.

Not only is this tubing cured with platinum and free of plasticizers like DEHP, it can handle higher temperatures than any of our other high-purity tubing. Use in applications up to 450° F.

Hose is polyurethane so it stretches and flexes more than nylon retracting hose.

Attach barbed fittings to this hose for use in low-pressure air applications.

Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.

Made of nylon, this hose is lighter and easier to maneuver than rubber hydraulic hose.

With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Rated for temperatures down to -450° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

The strongest composite we offer, carbon fiber is comparable in strength to 6061 aluminum yet lighter in weight.