5" Tubing | McMaster-Carr

Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.

Flexible Duct Hose with Wear
Strip for Corrosive Fumes

Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.

Clear Flexible Duct Hose with Wear Strip for Fumes

Vent smoke, water-based paint fumes, and welding fumes with this hose that gives you a clear view inside your line.

Crush-Resistant Flexible Duct
Hose for Exhaust Fumes

Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over.

Duct Hose and Fittings for Dust

Blo-R-Vac Flexible Duct Hose for Dust

A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.

High-Temperature Flexible Duct Hose for Dust

The neoprene coating on this hose holds up under high heat.

Flexible Duct Hose for Clean Environments

This white hose makes dirt and other contaminants easy to spot.

Blo-R-Vac Flexible Duct
Hose with Wear Strip for Dust

This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.

Flame-Resistant Flexible Duct
Hose with Wear Strip for Dust

In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.

Abrasion-Resistant Very Flexible Duct Hose for Dust

A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).

Very Flexible Duct Hose for Dust

The small bend radius makes this hose easy to wrap around corners and install in tight spaces.

Static-Control Very Flexible Duct Hose for Dust

The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.

Bend-and-Stay Very Flexible Duct Hose for Dust

Bend this hose in any direction and it will hold its shape without support.

Duct Hose and Fittings for Chips and Shavings

Blo-R-Vac Duct Hose for
Wood Chips and Plastic Pellets

A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.

Continuous-Flex Duct Hose for
Wood Chips and Plastic Pellets

The neoprene coating on this hose withstands continuous motion without weakening.

Abrasion-Resistant Duct Hose with Wear
Strip for Wood Chips and Plastic Pellets

Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.

Flame-Resistant Duct Hose for
Wood Chips and Plastic Pellets

Hose meets UL 94 V-2 for flame retardance.

Bend-and-Stay Metal Duct Hose
for Wood Chips and Plastic Pellets

Lightweight, yet strong, this aluminum hose bends and maintains its shape without support.

Super-Abrasion-Resistant Metal Duct
Hose for Metal Chips and Shavings

Formed by metal interlocked strips, this hose has the strength to stand up to sharp, abrasive materials.

Puncture- and Abrasion-Resistant Duct
Hose for Metal Chips and Shavings

Blow jagged, abrasive materials through this hose without worrying about punctures or tears. It’s made of extra--thick TPU (thermoplastic polyurethane).

Static-Control Duct Hose for
Metal Chips and Shavings

SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.

Duct Hose with Wear Strip
for Metal Chips and Shavings

Hose has a plastic spiral that acts as a wear strip to protect against damage.

Extra-Strength High-Vacuum Duct
Hose for Metal Chips and Shavings

The strongest rubber duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.

High-Pressure Duct Hose for
Metal Chips and Shavings

A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.

Antistatic Duct Hose for Dry Food

Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.

Duct Hose and Fittings for Air

Bend-and-Stay Metal Duct Hose for Air

Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.

Crush-Resistant Duct Hose for Air

Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.

Insulated Blo-N-Vent Duct
Hose with Wear Strip for Air

A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.

Quick-Attach Duct Hose with Wear Strip for Air

The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.

Heat-Reflective Duct Hose for Air

A metalized polyester cover reflects heat so the temperature inside the hose won’t rise.

Blo-N-Vent Duct Hose for Air

Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.

Blo-N-Vent Duct Hose with Wear Strip for Air

A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.

Easy-Store Duct Hose for Air

The most compressible hose we offer, this duct hose collapses to 5% of its length for easy storage.

Metal

Low-Carbon Steel Round Tubes

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as frames, supports, and conduit.

Multipurpose 4140 Alloy Steel Round Tubes

Made from alloy steel, also known as chrome-moly steel, these tubes resist fracturing from repeated stress. They’re used for a wide range of parts, including cylinders, rollers, and frames.

Multipurpose 304 Stainless Steel

From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

Multipurpose 6061 Aluminum Round Tubes

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

932 Bearing Bronze Tubes

Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.

Weldable 954 Bearing Bronze Tubes

954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears. The strength of this material increases with heat treating.

Oil-Filled 841 Bearing Bronze Tubes

Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.

Easy-to-Machine 936 Bearing Bronze Tubes

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

Plastic

Clear Scratch- and UV-Resistant Cast Acrylic Tubes

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

Easy-to-Machine Wear-Resistant Cast Nylon Tubes

This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.

MDS-Filled Easy-to-Machine
Wear-Resistant Cast Nylon Tubes

The addition of MDS gives these tubes exceptional wear resistance along with a self-lubricating surface. They're made of cast nylon 6, making them easier to machine and better electrical insulators than other MDS-filled nylon tubes.

Chemical-Resistant Slippery PTFE Tubes

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Pressure-Rated Borosilicate Glass Tubes

These short glass tubes can be used as glass bowls in oil dispensers.

Heating, Venting, and Air Conditioning

Pipe Insulation Banding

Save installation time with banding that’s ready to use. It has an easy-to-close fastener on one end.

Gas Chimney Vents and Fittings

For use with gas-fired equipment, such as boilers and furnaces, these vent pipes and fittings withstand temperatures up to 400° F. Also known as type B gas vents.

About Duct Hose

Large-Diameter Soft Rubber Tubing for Food and Beverage

Large-Diameter Soft RubberTubing for Food and Beverage

Hose

Vibration-Resistant Water Hose with Flanges

High-Pressure Easy-Store Discharge Water Hose

High-Temperature Coolant Hose

Coolant Hose

Extreme-Temperature Coolant Hose

Dry-Food Hose

Clear-View Abrasion-Resistant Dry-Food Hose

Duct Hose and Fittings for Fumes

High-Temperature Rigid Metal Duct Hose for Fumes

Adjustable-Diameter Rigid Duct Hose for Fumes

Bend-and-Stay Very FlexibleMetal Duct Hose for Fumes

Blo-R-Vac Very Flexible Duct Hose for Fumes

Lightweight Very Flexible Duct Hose for Fumes

Easy-Store Very Flexible Duct Hose for Fumes

Retracting Very Flexible DuctHose with Wear Strip for Fumes

Economical Very Flexible Duct Hose for Fumes

High-Temperature Flexible Duct Hose for Fumes

Flexible Duct Hose with WearStrip for Corrosive Fumes

Clear Flexible Duct Hose with Wear Strip for Fumes

Crush-Resistant Flexible DuctHose for Exhaust Fumes

Duct Hose and Fittings for Dust

Blo-R-Vac Flexible Duct Hose for Dust

High-Temperature Flexible Duct Hose for Dust

Flexible Duct Hose for Clean Environments

Blo-R-Vac Flexible DuctHose with Wear Strip for Dust

Flame-Resistant Flexible DuctHose with Wear Strip for Dust

Abrasion-Resistant Very Flexible Duct Hose for Dust

Very Flexible Duct Hose for Dust

Static-Control Very Flexible Duct Hose for Dust

Bend-and-Stay Very Flexible Duct Hose for Dust

Duct Hose and Fittings for Chips and Shavings

Blo-R-Vac Duct Hose forWood Chips and Plastic Pellets

Continuous-Flex Duct Hose forWood Chips and Plastic Pellets

Abrasion-Resistant Duct Hose with WearStrip for Wood Chips and Plastic Pellets

Flame-Resistant Duct Hose forWood Chips and Plastic Pellets

Bend-and-Stay Metal Duct Hosefor Wood Chips and Plastic Pellets

Super-Abrasion-Resistant Metal DuctHose for Metal Chips and Shavings

Puncture- and Abrasion-Resistant DuctHose for Metal Chips and Shavings

Static-Control Duct Hose forMetal Chips and Shavings

Duct Hose with Wear Stripfor Metal Chips and Shavings

Extra-Strength High-Vacuum DuctHose for Metal Chips and Shavings

High-Pressure Duct Hose forMetal Chips and Shavings

Antistatic Duct Hose for Dry Food

Duct Hose and Fittings for Air

Bend-and-Stay Metal Duct Hose for Air

Crush-Resistant Duct Hose for Air

Insulated Blo-N-Vent DuctHose with Wear Strip for Air

Quick-Attach Duct Hose with Wear Strip for Air

Heat-Reflective Duct Hose for Air

Blo-N-Vent Duct Hose for Air

Blo-N-Vent Duct Hose with Wear Strip for Air

Easy-Store Duct Hose for Air

Metal

Low-Carbon Steel Round Tubes

Multipurpose 4140 Alloy Steel Round Tubes

Multipurpose 304 Stainless Steel

Multipurpose 6061 Aluminum Round Tubes

932 Bearing Bronze Tubes

Weldable 954 Bearing Bronze Tubes

Oil-Filled 841 Bearing Bronze Tubes

Easy-to-Machine 936 Bearing Bronze Tubes

Plastic

Clear Scratch- and UV-Resistant Cast Acrylic Tubes

Easy-to-Machine Wear-Resistant Cast Nylon Tubes

MDS-Filled Easy-to-MachineWear-Resistant Cast Nylon Tubes

Chemical-Resistant Slippery PTFE Tubes

Pressure-Rated Borosilicate Glass Tubes

Pressure-Rated Borosilicate Glass Tubes

Heating, Venting, and Air Conditioning

Pipe Insulation Banding

Gas Chimney Vents and Fittings

Large-Diameter Soft Rubber
Tubing for Food and Beverage

Bend-and-Stay Very Flexible
Metal Duct Hose for Fumes

Retracting Very Flexible Duct
Hose with Wear Strip for Fumes

Flexible Duct Hose with Wear
Strip for Corrosive Fumes

Crush-Resistant Flexible Duct
Hose for Exhaust Fumes

Blo-R-Vac Flexible Duct
Hose with Wear Strip for Dust

Flame-Resistant Flexible Duct
Hose with Wear Strip for Dust

Blo-R-Vac Duct Hose for
Wood Chips and Plastic Pellets

Continuous-Flex Duct Hose for
Wood Chips and Plastic Pellets

Abrasion-Resistant Duct Hose with Wear
Strip for Wood Chips and Plastic Pellets

Flame-Resistant Duct Hose for
Wood Chips and Plastic Pellets

Bend-and-Stay Metal Duct Hose
for Wood Chips and Plastic Pellets

Super-Abrasion-Resistant Metal Duct
Hose for Metal Chips and Shavings

Puncture- and Abrasion-Resistant Duct
Hose for Metal Chips and Shavings

Static-Control Duct Hose for
Metal Chips and Shavings

Duct Hose with Wear Strip
for Metal Chips and Shavings

Extra-Strength High-Vacuum Duct
Hose for Metal Chips and Shavings

High-Pressure Duct Hose for
Metal Chips and Shavings

Insulated Blo-N-Vent Duct
Hose with Wear Strip for Air

MDS-Filled Easy-to-Machine
Wear-Resistant Cast Nylon Tubes