Lighter than other plastic and rubber tubing, but extremely tough, this TPE plastic tubing stands up to the wear and tear of daily use. It’s made of FDA listed materials, so it’s suitable for use with food and beverage. Since it doesn’t contain plasticizers like DEHP, it won’t impart tastes or odors to the fluid passing through it. Tubing is opaque, so you cannot see inside the line to monitor flow. It is semi-flexible, so it is good for gradual bends.

For technical drawings and 3-D models, click on a part number.

When working near chemicals such as acids and alkalies, these tubes offer 360° protection to wires, cords, and anything that can slide through them. They’re made of PVC Type 1, a material that’s easy to thermoform, plus it is an excellent insulator. These tubes are oversized on the outside and undersized on the inside to allow for finishing to the sizes listed.

For technical drawings and 3-D models, click on a part number.

SBR grommets have good abrasion resistance. They are not for use outdoors.

Buna-N grommets withstand a wider range of temperatures than other grommets and resist abrasion, oil, and grease. They are not for use outdoors.

Grommets that meet MIL-G-3036 resist hot petroleum-based oil and coolant.

Grommets that meet MS-35489 and AN931 adhere to military dimensional standards.

For technical drawings and 3-D models, click on a part number.

These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. All of these grommets can be used outdoors.

Grommets that meet MIL-G-3036 resist hot petroleum-based oil and coolant.

Grommets that meet MS35489, AN930, and AN931 adhere to military dimensional standards.

Silicone grommets withstand a wider range of temperatures, but are not as chemical resistant as fluoroelastomer. They have a medium hardness rating, which offers a balance of cushioning and impact resistance.

For technical drawings and 3-D models, click on a part number.

These grommets snap into place and have wings that expand against the sides of the hole to lock them in position. Use them to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth holes. Made of plastic, these grommets are chemical resistant, and all have an extra-hard rating to withstand high levels of impact.

For technical drawings and 3-D models, click on a part number.

A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material. Use a cutting punch (sold separately) to create the hole, then set the grommet using either an installation punch or a press (both sold separately). Grommet trade size refers to the hole size and the size of the installation tool needed. All of these grommets can be used outdoors.

Grommets with a tooth lock washer keep material from loosening and rotating better than those with a standard washer.

Grommets that meet MIL-G-16491, NASM20230, and AN230 adhere to military dimensional standards.

Brass grommets are strong and have good corrosion resistance. Nickel-plated brass grommets have more corrosion resistance than brass grommets. Stainless steel grommets have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Hammer-driven cutting punches create holes for installing grommets when you strike them with a wooden or rawhide mallet. Hammer-driven installation punches set grommets in a hole when you strike them with a wooden or rawhide mallet.

For technical drawings and 3-D models, click on a part number.