About Sleeving
More
About Plastic and Rubber Tubing
More
About Duct Hose
More
About Hose
More
Corrugated Flexible Hard Plastic Tubing for Chemicals
- Flexible
- Compatible with Compression Tube Fittings
- Hard (Durometer 55D)
- Temperature Range: -110° to 200° F
The corrugated design allows this Teflon® FEP (fluorinated ethylene propylene) tubing to extend and compress just like an accordion. It is flexible and bends easily without kinking. Tubing has the chemical resistance to withstand a wide variety of acids and other harsh substances. It has a cuff on each end for easy connections to compression fittings. Tubing is semi-clear, so it gives you a limited view inside your line.
For technical drawings and 3-D models, click on a part number.
High-Temperature Abrasion-Resistant Soft
Rubber Tubing for Food, Beverage, and Dairy
- Flexible
- Compatible with Barbed Tube Fittings
- Soft (Durometer 65A)
- Temperature Range: -60° to 450° F
Not only can this tubing handle the highest temperatures of all our soft tubing for food, beverage, and dairy, it also has thick, silicone rubber walls for superior abrasion and crush resistance. Tubing is made of FDA listed materials. Free of plasticizers like DEHP, it won’t impart tastes or odors to the fluid passing through it. Tubing is semi-clear, so you get a limited view inside the line. It is flexible, so it bends easily around objects.
For technical drawings and 3-D models, click on a part number.
High-Pressure Water Hose
- Temperature Range: 10° to 150° F
- Material: Blended Rubber
- Color: Yellow
- Compatible Hose Fittings: Barbed
The steel wire reinforcement gives this hose extra strength in high-pressure conditions. The blended rubber cover is nonmarking and resists oil and abrasion.
For technical drawings and 3-D models, click on a part number.
Per Ft. | |||||||
---|---|---|---|---|---|---|---|
ID | OD | Bend Radius | Max. Pressure | Max. Continuous Lg., ft. | 1-49 | 50-Up | |
1 1/4" | 1 13/16" | 14" | 600 psi @ 150° F 1,000 psi @ 72° F | 50 | 000000000 | 000000 | 00000 |
Suction Water Hose
- Temperature Range: -10° to 130° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: PVC
- Color: Clear or Green
- Compatible Hose Fittings: Cam-and-Groove or Easy-Fit Barbed
Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose. It is made of PVC, which is economical yet durable.
Suction Water Hose with Cam-and-Groove Socket and Plug
- Temperature Range: -10° to 130° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: PVC
- Color: Clear or Green
Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose. It is made of PVC, which is economical yet durable. To connect fittings, insert the plug into the socket and push the levers down.
Coupling Size | ID | OD | Bend Radius | Color | Other Lengths, ft. | 5 ft. | 10 ft. | 15 ft. | 20 ft. | 25 ft. | 30 ft. | 50 ft. | 100 ft. | |
Aluminum Cam-and-Groove Female Socket × Aluminum Cam-and-Groove Male Plug | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
90 psi @ 72° F Max. Pressure | ||||||||||||||
1 1/2 × 1 1/2 | 1 1/2" | 1 13/16" | 5" | Clear | 1 to 100 | 0000000 | ||||||||
1 1/2 × 1 1/2 | 1 1/2" | 1 13/16" | 5" | Green | 1 to 100 | 0000000 | ||||||||
Polypropylene Cam-and-Groove Female Socket × Polypropylene Cam-and-Groove Male Plug | ||||||||||||||
90 psi @ 72° F Max. Pressure | ||||||||||||||
1 1/2 × 1 1/2 | 1 1/2" | 1 13/16" | 5" | Clear | 1 to 100 | 0000000 | ||||||||
1 1/2 × 1 1/2 | 1 1/2" | 1 13/16" | 5" | Green | 1 to 100 | 0000000 |
Suction Water Hose with Threaded Fittings
- Temperature Range: -10° to 130° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: PVC
- Color: Clear or Green
- Female Fitting Swivels Until Tightened
Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose. It is made of PVC, which is economical yet durable. Fittings that swivel until tightened are easy to install.
For technical drawings and 3-D models, click on a part number.
Lubricated-Air Hose
- Temperature Range: -20° to 160° F
- Material: Blended Rubber
- Color: Red
- Compatible Hose Fittings: Barbed
Hose is oil resistant for use with power tools that use lubricated air.
For technical drawings and 3-D models, click on a part number.
Per Ft. | ||||||
---|---|---|---|---|---|---|
ID | OD | Bend Radius | Max. Continuous Lg., ft. | 1-99 | 100-Up | |
250 psi @ 72° F Max. Pressure | ||||||
1 1/4" | 1 13/16" | 8 3/4" | 100 | 0000000 | 000000 | 000000 |
Wet-Food and Beverage Hose
- Temperature Range: -15° to 155° F
- Maximum Vacuum: 29" of Hg @ 72° F
- Material: PVC
- Color: Clear with White Spiral
- Compatible Hose Fittings: Cam-and-Groove and Quick-Clamp Sanitary
The PVC construction means this hose won’t impart tastes or odors on your product. The hose is clear, so you can monitor flow. Use it with juice, milk, meat, poultry, and syrup.
Per Ft. | ||||||||
---|---|---|---|---|---|---|---|---|
ID | OD | Bend Radius | Max. Pressure | Specifications Met | Max. Continuous Lg., ft. | 1-99 | 100-Up | |
1 1/2" | 1 13/16" | 6" | 85 psi @ 72° F | NSF/ANSI 61 | 100 | 0000000 | 00000 | 00000 |
Wet-Food and Beverage Hose with Quick-Clamp Sanitary Fittings
- Temperature Range: -15° to 155° F
- Maximum Vacuum: 29" of Hg @ 72° F
- Material: PVC
- Color: Clear with White Spiral
The PVC construction means this hose won’t impart tastes or odors on your product. The hose is clear, so you can monitor flow. Use it with juice, meat, poultry, and syrup. Fittings are also known as tri-clamp fittings. They attach to other quick-clamp fittings with a gasket and a clamp.
Flange OD | ID | OD | Bend Radius | Max. Pressure | Specifications Met | Other Lengths, ft. | 5 ft. | 10 ft. | 15 ft. | 20 ft. | 25 ft. | 50 ft. | |
304 Stainless Steel Quick-Clamp Sanitary × 304 Stainless Steel Quick-Clamp Sanitary | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1.984" × 1.984" | 1 1/2" | 1 13/16" | 6" | 85 psi @ 72° F | FDA Compliant 21 CFR 177.2600 | 1 to 100 | 0000000 |
Wet-Food and Beverage Hose with Cam-and-Groove Socket and Plug
- Temperature Range: -15° to 155° F
- Maximum Vacuum: 29" of Hg @ 72° F
- Material: PVC
- Color: Clear with White Spiral
The PVC construction means this hose won’t impart tastes or odors on your product. The hose is clear, so you can monitor flow, and is NSF/ANSI 61 certified. Use it with juice, meat, poultry, and syrup. To connect fittings, insert the plug into the socket and push the levers down.
Coupling Size | ID | OD | Bend Radius | Max. Pressure | Specifications Met | Other Lengths, ft. | 5 ft. | 10 ft. | 15 ft. | 20 ft. | 25 ft. | 50 ft. | |
316 Stainless Steel Cam-and-Groove Female Socket × 316 Stainless Steel Cam-and-Groove Male Plug | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 1/2 × 1 1/2 | 1 1/2" | 1 13/16" | 6" | 85 psi @ 72° F | NSF/ANSI 61 | 1 to 100 | 0000000 |
High-Temperature Steam Hose with Female Threaded Fittings
- Temperature Range: -40° to 450° F
- Material: EPDM Rubber
- Color: Black or Red
- Both Fittings Swivel Until Tightened
Made of EPDM rubber reinforced with steel wire so it handles high temperatures, this hose is often used to clean hard-to-reach areas or supply heat and moisture to processing equipment. The fittings are also known as ground-joint couplings. They swivel until tightened for easy installation.
For technical drawings and 3-D models, click on a part number.
High-Temperature Steam Hose with Male and Female Threaded Fittings
- Temperature Range: -40° to 450° F
- Material: EPDM Rubber
- Color: Black or Red
- Female Fitting Swivels Until Tightened
Made of EPDM rubber reinforced with steel wire so it handles high temperatures, this hose is often used to clean hard-to-reach areas or supply heat and moisture to processing equipment. The fittings are also known as ground-joint couplings. Fittings that swivel until tightened are easy to install.
For technical drawings and 3-D models, click on a part number.
Medium-Pressure Fuel Oil Hose
- Temperature Range: -20° to 140° F
- Material: Buna-N Rubber with Blended Rubber Cover
- Color: Brown or Red
- Compatible Hose Fittings: Barbed
Multi-spiral yarn reinforcement gives this hose strength. Hose is not for use with gasoline.
For technical drawings and 3-D models, click on a part number.
Per Ft. | |||||||
---|---|---|---|---|---|---|---|
ID | OD | Bend Radius | Color | Max. Continuous Lg., ft. | 1-99 | 100-Up | |
250 psi @ 72° F Max. Pressure | |||||||
1 1/4" | 1 13/16" | 12 1/2" | Red | 100 | 00000000 | 000000 | 000000 |
Medium-Pressure Fuel Oil Hose with Male and Female Threaded Fittings
- Temperature Range: -20° to 140° F
- Material: Buna-N Rubber with Blended Rubber Cover
- Color: Brown or Red
- Female Fitting Swivels Until Tightened
Multi-spiral yarn reinforcement gives this hose strength to handle higher pressures. Hose is not for use with gasoline. Fittings that swivel until tightened are easy to install.
For technical drawings and 3-D models, click on a part number.
High-Temperature Rigid Metal Duct Hose for Fumes
- Rigid
- Compatible Clamps: U-Bolt Clamps
- Max. Temperature: Galvanized Steel: 750° F; Aluminum: 450° F; 304 Stainless Steel: 1500° F; 316 Stainless Steel: 1200° F
Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures. Hose is for use with smoke, welding fumes, and oil fumes.
Galvanized steel offers fair corrosion resistance.
Aluminum is lighter than steel and has good corrosion resistance.
304 stainless steel has very good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
ID | OD | Bend Radius | Interior Surface Texture | Specifications Met | Other Lengths, ft. | 5 ft. | 6 ft. | 7 ft. | 8 ft. | 9 ft. | 10 ft. | 15 ft. | 20 ft. | 25 ft. | |
Galvanized Steel | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.012" Material Thick. | |||||||||||||||
1 5/8" | 1 13/16" | 5" | Ribbed | __ | 1 to 50 | 0000000 | |||||||||
Aluminum | |||||||||||||||
0.012" Material Thick. | |||||||||||||||
1 5/8" | 1 13/16" | 5" | Ribbed | __ | 1 to 100 | 00000000 | |||||||||
304 Stainless Steel | |||||||||||||||
0.012" Material Thick. | |||||||||||||||
1 5/8" | 1 13/16" | 4 1/2" | Ribbed | ASTM A240 | 1 to 50 | 0000000 |
Continuous-Flex Duct Hose for Wood Chips and Plastic Pellets
- Flexible
- Compatible Clamps: Worm-Drive and Quick-Release Clamps
- Color: Black
- Temperature Range: -40° to 250° F
The neoprene coating on this hose withstands continuous motion without weakening. Hose is also for use with cardboard fibers. It meets UL 94 V-0 for flame retardance.
Warning: Hose should not be used for applications that generate a static charge.
Spiral | Per Ft. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ID | OD | Bend Radius | Compresses To | Max. Vacuum | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Specifications Met | Max. Continuous Lg., ft. | 1-24 | 25-Up | |
Neoprene-Coated Nylon | ||||||||||||||
1 1/2" | 1 13/16" | 3/4" | 35% | 29 in. of Hg @ 72° F | 30 psi @ 72° F | 0.026" | Ribbed | Right Hand | Metal | UL 94 V-0 | 25 | 0000000 | 000000 | 00000 |
High-Temperature Flexible Duct Hose for Dust
- Flexible
- Compatible Clamps: Worm-Drive Clamps
- Color: Black
- Temperature Range: -60° to 300° F
The neoprene coating on this hose holds up under high heat. Hose meets UL 94 V-0 for flame retardance. It has a smooth interior for unrestricted flow. Hose is for use with lint, dust, and sawdust.
Warning: Hose should not be used for applications that generate a static charge.
For technical drawings and 3-D models, click on a part number.
Spiral | Per Ft. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ID | OD | Bend Radius | Compresses To | Max. Vacuum | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Specifications Met | Max. Continuous Lg., ft. | 1-11 | 12-Up | |
Neoprene-Coated Fiberglass | ||||||||||||||
1 3/4" | 1 13/16" | 2" | 75% | 22 in. of Hg @ 72° F | 23 psi @ 72° F | 0.024" | Smooth | Left Hand | Metal | UL 94 V-0 | 12 | 00000000 | 000000 | 00000 |
Very Flexible Duct Hose for Dust
- Very Flexible
- Compatible Clamps: Worm-Drive Clamps
- Color: Clear or Black
- Temperature Range: Clear: -20° to 180° F; Black: -40° to 250° F
The small bend radius makes this hose easy to wrap around corners and install in tight spaces. It is for use with lint, dust, and sawdust.
Black hose meets UL 94 V-0 for flame retardance.
Warning: Hose should not be used for applications that generate a static charge.
Spiral | Per Ft. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ID | OD | Bend Radius | Compresses To | Max. Vacuum | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Specifications Met | Max. Continuous Lg., ft. | 1-24 | 25-Up | |
Black Neoprene-Coated Polyester | ||||||||||||||
1 1/2" | 1 13/16" | 1 1/2" | 30% | 29 in. of Hg @ 72° F | 30 psi @ 72° F | 0.03" | Ribbed | Right Hand | Metal | UL 94 V-0 | 25 | 0000000 | 00000 | 00000 |
Smooth-Flow Duct Hose for Liquids
- Flexible
- Color: White
- Temperature Range: 15° to 125° F
A smooth interior allows for unrestricted flow and makes this hose easy to clean. Hose is for use with water.
For technical drawings and 3-D models, click on a part number.
Spiral | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
ID | OD | Bend Radius | Compresses To | Max. Vacuum | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Max. Continuous Lg., ft. | Per Ft. | |
Per Foot | ||||||||||||
PVC | ||||||||||||
1 1/2" | 1 13/16" | 4" | 50% | 29 in. of Hg @ 72° F | 34 psi @ 72° F | 0.055" | Smooth | Right Hand | Plastic | 100 | 0000000 | 00000 |
Each | ||||||||||||
Full Coil | ||||||||||||
PVC | ||||||||||||
1 1/2" | 1 13/16" | 4" | 50% | 29 in. of Hg @ 72° F | 34 psi @ 72° F | 0.055" | Smooth | Right Hand | Plastic | 100 | 00000000 | 000000 |
Duct Hose with Wear Strip for Liquids
- Flexible
- Color: Clear; Wear Strip is Blue
- Temperature Range:-40° to 200° F
Run water, mist, oil, and other liquids through this hose. The wear strip protects the hose from damage caused by dragging.
For technical drawings and 3-D models, click on a part number.
Spiral | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
ID | OD | Bend Radius | Max. Vacuum | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Max. Continuous Lg., ft. | Per Ft. | |
Polyurethane | |||||||||||
1 1/2" | 1 13/16" | 3 1/2" | 28 in. of Hg @ 72° F | 40 psi @ 72° F | 0.05" | Ribbed | Left Hand | Plastic | 50 | 00000000 | 00000 |
Screw these fittings over the end of your duct hose to make connections to equipment.
ID | OD | |||||||
---|---|---|---|---|---|---|---|---|
For Hose ID | A | B | A | B | Temperature Range, °F | Color | Each | |
Vinyl-Coated PVC | ||||||||
1 1/2" | 2" | 1 1/2" | 2 3/16" | 1 3/4" | 20° to 160° | White | 0000000 | 00000 |
Heat-Reflective Corrugated Sleeving
Made of aluminum with a fiberglass liner, this sleeving reflects heat away from contents and withstands temperatures up to 900° F to protect against internal and external sources of heat. Often used to protect wire and cable in vehicle engines, it resists antifreeze, brake fluid, gasoline, and oil. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility. It holds its shape when bent.