System of Measurement System of Measurement |
|---|
|
OD OD | Show |
|---|
|
OD OD | Hide |
|---|
Shape Shape |
|---|
 | Round Tube |
Tolerance Rating Tolerance Rating |
|---|
|
Type Type |
|---|
 | Conduit |
Conduit Trade Size Conduit Trade Size |
|---|
|
Temper Temper |
|---|
|
Specifications Met Specifications Met |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Yield Strength Yield Strength |
|---|
|
Temper Rating Temper Rating |
|---|
|
Elongation Elongation |
|---|
|
Hardness Hardness |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
Heat Treatable Heat Treatable |
|---|
|
Aluminum Performance Properties Aluminum PerformanceProperties |
|---|
|
Flexibility Flexibility |
|---|
 | Rigid |
Fabrication Fabrication |
|---|
|
Appearance Appearance |
|---|
|
About Aluminum
More
About Conduit
More
Easy-to-Form Marine-Grade 5086 Aluminum Tubes
- Yield Strength: 28,000 psi
- Hardness: Not Rated
- Temper: H32 (1/4 Hard)
- Fabrication: Cold Worked
- Specifications Met: ASTM B210
5086 aluminum is used on ships, oil rigs, tanks, and pressure vessels because of its excellent saltwater resistance and formability.
Rigid Aluminum Conduit
For technical drawings and 3-D models, click on a part number.
This nonmagnetic aluminum conduit withstands damp and corrosive environments. It is lightweight, but its walls are strong enough to resist damage while remaining easy to bend and cut. Bend with a conduit bender (not included) and cut with a hacksaw. This conduit has one threaded male end; the other end has a threaded female connector.
5-ft. lengths can be shipped via small-parcel carrier.
Attach rigid aluminum conduit to a knockout in an outlet box or enclosure with these adapters, also known as hubs. Made of nonmagnetic aluminum, they withstand damp and corrosive environments.
Conduit Connection | Electrical Box Connection | |||||||
|---|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Thread Size | Thread Type | Gender | Thread Size | Thread Type | Gender | Each | |
| 1 1/4 | 1 1/4 | NPT | Female | 1 1/4 | NPSM | Male | 0000000 | 000000 |
Join pieces of rigid aluminum conduit. Made of nonmagnetic aluminum, these connectors withstand damp and corrosive environments.
Conduit Connection | |||||
|---|---|---|---|---|---|
| Conduit Trade Size | Thread Size | Thread Type | Gender | Each | |
| 1 1/4 | 1 1/4 | NPS | Female | 0000000 | 00000 |
Join pieces of rigid aluminum conduit. Made of nonmagnetic aluminum, these connectors withstand damp and corrosive environments.
Conduit Connection | ||||||
|---|---|---|---|---|---|---|
| Conduit Trade Size | Thread Size | Thread Type | Gender | Lg. | Each | |
| 1 1/4 | 1 1/4 | NPT | Male | 10 3/4" | 0000000 | 000000 |
Join two different sizes of rigid aluminum conduit. Made of nonmagnetic aluminum, these bushings withstand damp and corrosive environments.
Thick-Wall (Rigid) Steel Conduit
For technical drawings and 3-D models, click on a part number.
This impact- and crush-resistant conduit is also known as galvanized rigid conduit (GRC). It has one threaded male end; the other end has a threaded female connector.
5-ft. lengths can be shipped via small-parcel carrier.
Attach medium-wall (IMC) and thick-wall (rigid) steel conduit to a knockout in an outlet box or enclosure.
NPT female × NPSM male straight adapters are also known as hubs. They have an insulated throat to protect wire and cable from abrasion when being pulled. Use in wet or dry locations.
Conduit Connection | Electrical Box Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Thread Size | Thread Type | Gender | Thread Size | Thread Type | Gender | Material | Includes | Each | |
| 1 1/4 | 1 1/4 | NPT | Female | 1 1/4 | NPSM | Male | Zinc | Locknut | 0000000 | 000000 |
Attach medium-wall (IMC) and thick-wall (rigid) steel conduit to a knockout in an outlet box or enclosure.
NPSM male × flanged end male straight adapters are also known as conduit nipples, chase nipples, and box adapters. The flange installs through a knockout from inside an outlet box or enclosure. Use with a locknut (not included) to create a short raceway between boxes or enclosures.
Conduit Connection | Electrical Box Connection | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Thread Size | Thread Type | Gender | For Knockout Trade Size | Gender | Lg. | Material | Each | |
| 1 1/4 | 1 1/4 | NPSM | Male | 1 1/4 | Male | 7/8" | Zinc | 0000000 | 00000 |
Attach medium-wall (IMC) and thick-wall (rigid) steel conduit to a knockout in an outlet box or enclosure.
Compression female × NPSM male straight adapters offer a reliable hold on conduit.
Conduit Connection | Electrical Box Connection | |||||||
|---|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Gender | Thread Size | Thread Type | Gender | Material | Includes | Each | |
| 1 1/4 | Female | 1 1/4 | NPSM | Male | Zinc-Plated Steel | Locknut | 0000000 | 000000 |
Attach medium-wall (IMC) and thick-wall (rigid) steel conduit to a knockout in an outlet box or enclosure.
NPSM female × NPSM male 90° elbow adapters are for tight spaces where conduit can't be bent.
Conduit Connection | Electrical Box Connection Type | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Thread Size | Thread Type | Gender | Thread Size | Thread Type | Gender | Material | Each | |
| 1 1/4 | 1 1/4 | NPSM | Female | 1 1/4 | NPSM | Male | Iron | 0000000 | 000000 |
Join pieces of medium-wall (IMC) and thick-wall (rigid) conduit.
Compression female straight connectors join two pieces of unthreaded conduit. Push the conduit into the ends; tighten the compression rings to secure.
Conduit Connection | ||||
|---|---|---|---|---|
| Conduit Trade Size | Gender | Material | Each | |
| 1 1/4 | Female | Zinc-Plated Steel | 0000000 | 000000 |
Join pieces of medium-wall (IMC) and thick-wall (rigid) conduit.
NPT female straight connectors with glide insert have three pieces. The two outer pieces turn independently so you don't need to rotate the conduit.
Join pieces of medium-wall (IMC) and thick-wall (rigid) conduit.
NPSM female 90° elbow connectors with removable cover allow for quick access to pull wire and cable.
Join pieces of medium-wall (IMC) and thick-wall (rigid) conduit.
Offset elbow connectors join knockouts on outlet boxes or enclosures that do not align.
Conduit or Electrical Box Connection | |||||||
|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Thread Size | Thread Type | Gender | Offset Lg. | Material | Each | |
| 1 1/4 | 1 1/4 | NPSM | Male | 3/4" | Zinc | 0000000 | 00000 |
Connect to the end of conduit or a fitting to protect wire and cable from abrasion when being pulled. Use with medium-wall (IMC) and thick-wall (rigid) steel conduit.
Conduit Connection | |||||||
|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Thread Size | Thread Type | Gender | Material | Color | Each | |
| 1 1/4 | 1 1/4 | NPSM | Female | Polypropylene | Gray | 00000000 | 00000 |
Join two different sizes of threaded conduit. Use with medium-wall (IMC) and thick-wall (rigid) steel conduit.
Conduit Connection | ||||||
|---|---|---|---|---|---|---|
| Conduit Trade Size | Thread Size | Thread Type | Gender | Material | Each | |
| 1 1/4 × 1/2 | 1 1/4 × 1/2 | NPSM | Male × Female | Zinc-Plated Steel | 0000000 | 00000 |
| 1 1/4 × 3/4 | 1 1/4 × 3/4 | NPSM | Male × Female | Zinc-Plated Steel | 0000000 | 0000 |
| 1 1/4 × 1 | 1 1/4 × 1 | NPSM | Male × Female | Zinc-Plated Steel | 0000000 | 0000 |
| 2 × 1 1/4 | 2 × 1 1/4 | NPSM | Male × Female | Zinc-Plated Steel | 0000000 | 00000 |
Ground conduit by running a ground wire through the attached lug. The included grommet protects wire and cable from abrasion when being pulled. Use with medium-wall (IMC) and thick-wall (rigid) steel conduit.
Grounding clamps with hinge open for quick installation around conduit and secure with a screw.
| Conduit Trade Size | Gender | Material | Compatible With | Each | |
Grounding Clamp with Hinge | |||||
|---|---|---|---|---|---|
| 1 1/4 | Female | Zinc | Aluminum Wire, Copper Wire | 00000000 | 000000 |
Reduce the knockout size in an outlet box or enclosure so you can attach a different size of medium-wall (IMC) and thick-wall (rigid) steel conduit to it. Two reducing washers are required per knockout.
Seal out moisture while reducing a knockout size in an outlet box or enclosure. Each includes a washer and a rubber-coated steel gasket.
| Conduit Trade Size | Material | Each | |
| 1 1/4 × 3/4 | Steel | 00000000 | 000000 |
Rigid PVC Conduit
For technical drawings and 3-D models, click on a part number.
Also known as PVC Schedule 40 conduit, this conduit is corrosion resistant and UV light resistant for outdoor use. It is lightweight with strong walls to provide protection from damage. It can be buried or encased in concrete.
The female end is expanded so another piece of conduit can be pushed in to connect without a fitting. PVC cement is required (not included) when joining conduit and push-in ends on fittings and access ports.
8-ft. lengths can be shipped via small-parcel carrier.
Attach PVC Schedule 40 or Schedule 80 conduit to a knockout in an outlet box or enclosure. These adapters are lightweight, corrosion resistant, and UV light resistant for outdoor use. They can be buried or encased in concrete. PVC cement is required (not included) to secure push-in connections.
Adapters with NPT threads connect unthreaded conduit to threaded fittings and knockouts. Push-in male × flanged end male adapters, also known as box adapters, install through a knockout from inside an electrical enclosure.
Conduit Connection | Electrical Box Connection | ||||||
|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Gender | Thread Size | Thread Type | For Knockout Trade Size | Gender | Each | |
Push-In Conduit Connection × Threaded Electrical Box Connection | |||||||
| 1 1/4 | Female | 1 1/4 | NPT | __ | Female | 0000000 | 00000 |
| 1 1/4 | Female | 1 1/4 | NPT | __ | Male | 0000000 | 000 |
Push-In Conduit Connection × Flanged End Electrical Box Connection | |||||||
| 1 1/4 | Male | __ | __ | 1 1/4 | Male | 0000000 | 0000 |
Join pieces of PVC Schedule 40 or Schedule 80 conduit. These connectors are lightweight, corrosion resistant, and UV light resistant for outdoor use. They can be buried or encased in concrete. They have push-in ends that slide over conduit. PVC cement is required (not included) to secure the connection.
Conduit Connection | |||
|---|---|---|---|
| Conduit Trade Size | Gender | Each | |
Push-In Conduit Connection | |||
| 1 1/4 | Female | 0000000 | 00000 |
Join pieces of PVC Schedule 40 or Schedule 80 conduit. These connectors are lightweight, corrosion resistant, and UV light resistant for outdoor use. They can be buried or encased in concrete. PVC cement is required (not included) to secure the connection.
Conduit Connection | ||||
|---|---|---|---|---|
| Conduit Trade Size | Gender | Lg. | Each | |
Push-In Conduit Connection | ||||
| 1 1/4 | Male | 9 1/4" | 0000000 | 00000 |
Connect two different sizes and genders of PVC Schedule 40 or Schedule 80 conduit. These reducing adapters are lightweight, corrosion resistant, and UV light resistant for outdoor use. They can be buried or encased in concrete. PVC cement is required (not included) to secure the connection.
Also known as conduit bodies, these ports provide access to wire and cable inside PVC Schedule 40 or Schedule 80 conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run. These ports are lightweight, corrosion resistant, and UV light resistant for outdoor use. They can be buried or encased in concrete. PVC cement is required (not included) to secure the connection.
Conduit Connection | |||
|---|---|---|---|
| Conduit Trade Size | Gender | Each | |
Push-In Conduit Connection | |||
| 1 1/4 | Female | 0000000 | 000000 |
Also known as conduit bodies, these ports provide access to wire and cable inside PVC Schedule 40 or Schedule 80 conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run. These ports are lightweight, corrosion resistant, and UV light resistant for outdoor use. They can be buried or encased in concrete. PVC cement is required (not included) to secure the connection.
Conduit Connection | |||
|---|---|---|---|
| Conduit Trade Size | Gender | Each | |
Push-In Conduit Connection | |||
| 1 1/4 | Female | 0000000 | 000000 |
Also known as conduit bodies, these ports provide access to wire and cable inside PVC Schedule 40 or Schedule 80 conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run. These ports are lightweight, corrosion resistant, and UV light resistant for outdoor use. They can be buried or encased in concrete. PVC cement is required (not included) to secure the connection.
Conduit Connection | |||
|---|---|---|---|
| Conduit Trade Size | Gender | Each | |
Push-In Conduit Connection | |||
| 1 1/4 | Female | 0000000 | 000000 |
Also known as conduit bodies, these ports provide access to wire and cable inside PVC Schedule 40 or Schedule 80 conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run. These ports are lightweight, corrosion resistant, and UV light resistant for outdoor use. They can be buried or encased in concrete. PVC cement is required (not included) to secure the connection.
Conduit Connection | |||
|---|---|---|---|
| Conduit Trade Size | Gender | Each | |
Push-In Conduit Connection | |||
| 1 1/4 | Female | 0000000 | 00000 |