System of Measurement System of Measurement |
|---|
|
OD OD | Show |
|---|
|
OD OD | Hide |
|---|
Material Material |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Flexibility Flexibility |
|---|
|
Tube Style Tube Style |
|---|
|
For Use On For Use On |
|---|
|
Density Density |
|---|
|
Heat Flow Rate Heat Flow Rate |
|---|
|
Specifications Met Specifications Met |
|---|
|
Maximum Vacuum Maximum Vacuum |
|---|
|
For Use With For Use With |
|---|
|
Interior Surface Texture Interior Surface Texture |
|---|
|
Bend Radius Bend Radius |
|---|
|
Compatible Clamps Compatible Clamps |
|---|
|
About Selecting Thermal Insulation
More
About Duct Hose
More
Extra-Strength High-Vacuum Duct
Hose for Metal Chips and Shavings
- Rigid
- Compatible Clamps: Bolt Clamps
- Color: Black
- Temperature Range: -40° to 160° F
The strongest nonmetal duct hose we offer, this SBR rubber hose is reinforced with yarn and has a metal spiral. Hose has a smooth interior for unrestricted flow.
Warning: Hose should not be used for applications that generate a static charge.
Spiral | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Max. Vacuum | Material Thick. | Interior Surface Texture | Direction | Material | Max. Continuous Lg., ft. | Per Ft. | |
Per Foot | ||||||||||
SBR Rubber | ||||||||||
| 10" | 10 5/8" | 30" | 10 in. of Hg @ 72° F | 0.414" | Smooth | Right Hand | Metal | 10 | 0000000 | 000000 |
| Each | ||||||||||
Full Coil | ||||||||||
SBR Rubber | ||||||||||
| 10" | 10 5/8" | 30" | 10 in. of Hg @ 72° F | 0.414" | Smooth | Right Hand | Metal | 10 | 00000000 | 000000 |
Mineral Wool Pipe Insulation
- Temperature Range: 0° to 1200° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 8 lbs./cu. ft.
- Color: Yellow
- Specifications Met: ASTM E84 5/0 for Flame and Smoke, ASTM C547
Rigid and flame resistant, these insulation tubes meet ASTM E84 5/0 for flame and smoke. They are typically used in process piping and mechanical systems and perform best at temperatures up to 600° F. To use outdoors, add metal jacketing.
2" Wall Thick. | ||||||
|---|---|---|---|---|---|---|
| ID | For Pipe Size | Lg., ft. | Flexibility | R Value | Each | |
| 6 5/8" | 6 | 3 | Rigid | 8.7 | 0000000 | 000000 |
Fiberglass Pipe Insulation
This common insulation material is typically used on hot and cold water lines and in process piping. To use outdoors, add metal jacketing.
Tubes, elbows, and tees are formed to provide the best fit on pipe and are the easiest to install. If your pipe is larger than the sizes we offer, choose a sheet/strip.
Tubes have an all-service jacket (ASJ) made of kraft paper with an adhesive strip closure. Seal with reinforced insulation tape (sold separately).
- Temperature Range: 0° to 850° F
- Jacket Temperature Range: -20° to 150° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 4.5 lbs./cu. ft.
- Color: Yellow
- Jacket Color: White
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C547, ASTM C585
- Temperature Range: 0° to 1000° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 5 lbs./cu. ft.
- Color: Brown
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C585
- Temperature Range: 0° to 1000° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 5 lbs./cu. ft.
- Color: Brown
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C585
2" Wall Thick. | |||||
|---|---|---|---|---|---|
| ID | For Pipe Size | Flexibility | R Value | Each | |
| 6 5/8" | 6 | Rigid | 8.7 | 00000000 | 000000 |