About Selecting Thermal Insulation
More
Mineral Wool Pipe Insulation
These insulation tubes and sheets meet ASTM E84 standards for flame and smoke. They are typically used in process piping and mechanical systems and perform best at temperatures up to 600° F. To use outdoors, add metal jacketing.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: 0° to 1200° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 8 lbs./cu. ft.
- Color: Yellow
- Specifications Met: See table
1 1/2" Wall Thick. | |||||||
|---|---|---|---|---|---|---|---|
| ID | For Pipe Size  | Lg., ft. | Flexibility | Specifications Met | R Value | Each | |
| 8 5/8" | 8 | 3 1/4 | Rigid | ASTM E84 0/0 for Flame and Smoke, ASTM C547 | 6.5 | 00000000 | 000000 |
Fiberglass Pipe Insulation
This common insulation material is typically used on hot and cold water lines and in process piping. To use outdoors, add metal jacketing.
Tubes, elbows, and tees are formed to provide the best fit on pipe and are the easiest to install. If your pipe is larger than the sizes we offer, choose a sheet/strip.
Tubes have an all-service jacket (ASJ) made of kraft paper with an adhesive strip closure. Seal with reinforced insulation tape (sold separately).
For technical drawings and 3-D models, click on a part number.
- Temperature Range: 0° to 850° F
- Jacket Temperature Range: -20° to 150° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 4.5 lbs./cu. ft.
- Color: Yellow
- Jacket Color: White
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C547, ASTM C585
- Temperature Range: 0° to 1000° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 5 lbs./cu. ft.
- Color: Brown
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C585
1 1/2" Wall Thick. | |||||
|---|---|---|---|---|---|
| ID | For Pipe Size | Flexibility | R Value | Each | |
| 8 5/8" | 8 | Rigid | 6.5 | 00000000 | 0000000 |