An EPDM cover guards this hose, so it won't tear if scraped or break down from ozone or UV light. Use it to move milk, syrup, meat, and other wet and food and beverages. It’s FDA compliant, so it’s safe to use with food. It’s also 3-A certified for its sanitary design. Made of butyl, it won’t impart tastes or odors to your product. It also won't corrode when washed repeatedly with hot water and cleaning solutions. The interior of the hose is reinforced with a yarn and steel wire, so it will hold its shape even when attached to a vacuum pump.

For technical drawings and 3-D models, click on a part number.

With a tough EPDM cover, this hose won’t wear down from rubbing or scraping, crack from ozone, or degrade from UV light. It has flanged ends that join with quick-clamp fittings, so you can easily access lines that carry milk, syrup, meat, and other wet food and drinks. You know this hose is safe to use with food because it’s FDA compliant and its fittings are 3-A certified. Made of butyl, it won’t impart tastes or odors to food and beverages as they pass through your line. Both the hose and fittings withstand high temperatures and mild cleaning solutions, so you can clean your line often. Reinforced with yarn and steel wire, this hose holds its shape and won’t collapse when hooked up to a vacuum pump.

The fittings are also known as tri-clamp fittings. Attach them to other quick-clamp fittings with a gasket and a clamp.

For technical drawings and 3-D models, click on a part number.

Braided stainless steel construction gives this hose moderate flexibility and makes it tough enough to handle extreme temperatures, as well as vibration. Bolt the flanged end to pumps and tanks. The flange swivels until tightened, so it’s easy to align with bolt holes. You’ll need a gasket to seal the connection.

Made of EPDM rubber reinforced with steel wire so it handles high temperatures, this hose is often used to clean hard-to-reach areas or supply heat and moisture to processing equipment. The fittings are also known as ground-joint couplings. Fittings that swivel until tightened are easy to install.

For technical drawings and 3-D models, click on a part number.

Made of EPDM rubber reinforced with steel wire so it handles high temperatures, this hose is often used to clean hard-to-reach areas or supply heat and moisture to processing equipment. The fittings are also known as ground-joint couplings. They swivel until tightened for easy installation.

For technical drawings and 3-D models, click on a part number.

Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures. Hose is for use with smoke, water-based paint fumes, and welding fumes.

Neoprene-coated hose meets UL 94 HB and UL 94 V-0 for flame retardance and can also handle sparks.

Silicone-coated hose handles a wider temperature range than neoprene-coated hose.

Warning: Hose should not be used for applications that generate a static charge.

For technical drawings and 3-D models, click on a part number.

Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over. Use to vent carbon monoxide exhaust fumes while engine idling. Hose is also for use with smoke and water-based paint fumes.

2" to 4" ID hose has one end that is slightly larger than the other end. To make longer lengths, screw the smaller end of one hose into the larger end of another hose of the same size. When your application requires frequent movement or pulling, use a straight connector.

For technical drawings and 3-D models, click on a part number.