About Stainless Steel
More
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Standard-Wall Plastic Pipe for Water
Connect this pipe to standard-wall plastic pipe fittings for a variety of residential and commercial low-pressure plumbing and water supply applications. It’s made of PVC, which has good corrosion resistance. Pipe meets NSF/ANSI Standard 61 for drinking water. It also meets ASTM D1784 and ASTM D1785 specifications and testing requirements for material quality. Connect this pipe to unthreaded female socket-connect fittings using a PVC primer and cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
CPVC Pipe for Hot Water
Made of CPVC, this pipe can withstand high temperatures up to 170° or 200° F. It meets NSF/ANSI Standard 61 for drinking water. Also known as Schedule 80 pipe, it has thick, strong walls for use in heavy duty industrial plumbing and water supply applications, such as water processing and waste water treatment. Pipe has good corrosion resistance. It is comparable to Corzan.
Connect unthreaded pipe to unthreaded female socket-connect fittings using a CPVC primer and cement (also known as solvent weld).
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- For Use With: Acetic Acid (10%), Calcium Chloride, Deionized Water, Drinking Water, Hydrochloric Acid (25%), Nitric Acid (10%), Phosphoric Acid (85%), Salt Water, Sodium Hydroxide (50%), Sulfuric Acid (75%), Water
- Temperature Range: 32° F to 170° F
- Specifications Met: DIN 8079, ISO 15493, NSF/ANSI 61
- Fittings: Use CPVC plastic
- Flanges: Use Class 150 CPVC plastic
UV-Resistant Polypropylene Pipe for Chemicals
This polypropylene pipe resists the damaging effects of ultraviolet light, so it’s suitable for outdoor use. It has the chemical resistance to withstand a wide variety of acids, solvents, and other harsh substances. Pipe has thick, strong walls for heavy duty chemical processing applications. It meets ASTM D4101 specifications and testing requirements for material quality.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
For technical drawings and 3-D models, click on a part number.
- For Use With: Solvents
- Temperature Range: 32° to 212° F
- Specifications Met: ASTM D4101
- Fittings:: Use Polypropylene Plastic
Use heat welding to connect unthreaded pipe to unthreaded female socket-connect fittings.
8 ft. | ||||||||
|---|---|---|---|---|---|---|---|---|
| DIN Size, mm | OD, mm | ID, mm | Wall Thick., mm | Material | Color | Max. Pressure | Each | |
| 50 | 50 | 40.8 | 4.6 | Polypropylene Plastic | Light Gray | 150 psi @ 72° F | 00000000 | 000000 |
Polished Multipurpose 304 Stainless Steel
Polished to either a brushed or mirror-like finish, this material is widely used to fabricate decorative enclosures and industrial workstations. The sheets, strips, bars, and adhesive-back foil are covered with a protective peel-off film. 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Brushed #4 is often called a satin finish; it’s similar to a #3 finish, except the grain lines are finer. Rectangular and round tubes are polished on the outside.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength:
Inch Sizes: Not Rated
Metric Sizes: 24,000 psi - Hardness:
Inch Sizes: Rockwell B80 (Medium)
Metric Sizes: Rockwell B70 (Medium) - Heat Treatment: See table
- Heat Treatable: No
- Specifications Met:
Inch Sizes: ASTM A554
Metric Sizes: ASTM A269
| OD | OD Tolerance | ID | Fabrication | Heat Treatment | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
Brushed #4 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
2mm Wall Thick. (-0.03mm to 0.03mm Tolerance) | |||||||||
| 50mm | -0.250mm to 0.250mm | 46mm | Seamless | Annealed (Softened) | Not Rated | 0000000 | |||
3mm Wall Thick. (-0.3mm to 0.3mm Tolerance) | |||||||||
| 50mm | -0.250mm to 0.250mm | 44mm | Seamless | Annealed (Softened) | Not Rated | 0000000 | |||