About Duct Hose
More
About Selecting Thermal Insulation
More
About Hose
More
Abrasion-Resistant Suction Water Hose
- Temperature Range: -10° to 140° F
- Material: EPDM Rubber or PVC
- Color: Black or Clear
- Compatible Hose Fittings: Cam-and-Groove
Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging. Hose is designed for vacuum applications such as removing accumulated water from pits, loading docks, and other flooded areas.
Per Ft. | ||||||||
|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Max. Pressure | Max. Vacuum | Max. Continuous Lg., ft. | 1-99 | 100-Up | |
Black EPDM Rubber Hose with Gray Spiral | ||||||||
| 6" | 6 7/8" | 27" | 35 psi @ 72° F | 20" of Hg @ 72° F | 50 | 0000000 | 000000 | 000000 |
High-Vacuum Hose with Claw-Clamp Fittings
More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. The ribbed design absorbs vibration so it doesn't transfer from one component to the next. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63. Each fitting on the hose requires four claw clamps and a ring (both sold separately) to connect. Not for use in pressure applications.
Double-claw clamps attach to the grooves on the fittings.
Single-claw clamps have a clamp on one end and an exposed bolt on the other. Thread the bolt-end directly into the body of pumps, valves, or other high-vacuum components.
- Temperature Range: Not Rated
- Material:
6" Lengths: 321 Stainless Steel
Other Lengths: 304 Stainless Steel - Fitting Material: 304 Stainless Steel
| For Tube OD | Flange OD | High-Vacuum Flange Size | ID | OD | Wall Thickness | Bend Radius | High Vacuum Connection Type | Max. Vacuum | Each | |
6" Lg. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 6" | 7.09" | 160 | 6" | 6 7/8" | 0.01" | 5 1/4" | ISO-K | 10 -8 torr @ 72° F | 0000000 | 0000000 |
Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Tube OD | For Flange OD | For High-Vacuum Flange Size | High Vacuum Connection Type | O-Ring | Inner Ring | Max. Vacuum | Max. Temp., °F | Each | |
| 6" | 7.09" | 160 | ISO-K | Viton® Fluoroelastomer Rubber | 304 Stainless Steel | 10 -8 torr @ 72° F | 400° | 0000000 | 000000 |
High-Pressure Duct Hose for Metal Chips and Shavings
- Flexible
- Compatible Clamps: Worm-Drive and Twin-Ring Clamps
- Color: Blue
- Temperature Range: 0° to 158° F
A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications. It has a smooth interior for unrestricted flow.
Warning: Hose should not be used for applications that generate a static charge.
Spiral | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Compresses To | Maximum Vacuum | Maximum Pressure | Lining Material | Material Thickness | Interior Surface Texture | Direction | Material | Max. Continuous Lg., ft. | Per Ft. | |
Per Foot | |||||||||||||
PVC | |||||||||||||
| 6" | 6 7/8" | 25" | 75% | 25 in. of Hg @ 72° F | 23 psi @ 72° F | Polyurethane | 0.18" | Smooth | Right Hand | Plastic | 50 | 0000000 | 000000 |
| Each | |||||||||||||
Full Coil | |||||||||||||
PVC | |||||||||||||
| 6" | 6 7/8" | 25" | 75% | 25 in. of Hg @ 72° F | 23 psi @ 72° F | Polyurethane | 0.18" | Smooth | Right Hand | Plastic | 50 | 00000000 | 00000000 |
Flexible Rubber Foam Pipe Insulation
Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines. Seal with contact adhesive (sold separately). To use outdoors, coat in acrylic paint.
- Temperature Range: See Table
- Heat Flow Rate: See Table
- Density: See Table
- Color: See Table
- Specifications Met: See Table
1/2" Wall Thick. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | For Pipe Size | Lg., ft. | Temp. Range, °F | Heat Flow Rate | Density | Color | Flexibility | Specifications Met | R Value | Each | |
Buna-N/PVC Foam | |||||||||||
| 5 3/4" | 5 | 6 | -40° to 220° | 0.25 Btu @ 75° F | 4.5 lbs./cu. ft. | Black | Flexible | ASTM E84 25/50 for Flame and Smoke, ASTM C534 | 2 | 00000000 | 000000 |
Mineral Wool Pipe Insulation
These insulation tubes and sheets meet ASTM E84 standards for flame and smoke. They are typically used in process piping and mechanical systems and perform best at temperatures up to 600° F. To use outdoors, add metal jacketing.
- Temperature Range: 0° to 1200° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 8 lbs./cu. ft.
- Color: Yellow
- Specifications Met: See table
2" Wall Thick. | |||||||
|---|---|---|---|---|---|---|---|
| ID | For Pipe Size | Lg., ft. | Flexibility | Specifications Met | R Value | Each | |
| 2 7/8" | 2 1/2 | 3 1/4 | Rigid | ASTM E84 0/0 for Flame and Smoke, ASTM C547 | 8.7 | 00000000 | 000000 |
Fiberglass Pipe Insulation
This common insulation material is typically used on hot and cold water lines and in process piping. To use outdoors, add metal jacketing.
Tubes, elbows, and tees are formed to provide the best fit on pipe and are the easiest to install. If your pipe is larger than the sizes we offer, choose a sheet/strip.
Tubes have an all-service jacket (ASJ) made of kraft paper with an adhesive strip closure. Seal with reinforced insulation tape (sold separately).
- Temperature Range: 0° to 850° F
- Jacket Temperature Range: -20° to 150° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 4.5 lbs./cu. ft.
- Color: Yellow
- Jacket Color: White
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C547, ASTM C585
- Temperature Range: 0° to 1000° F
- Heat Flow Rate: 0.23 Btu @ 75° F
- Density: 5 lbs./cu. ft.
- Color: Brown
- Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C585
2" Wall Thick. | |||||
|---|---|---|---|---|---|
| ID | For Pipe Size | Flexibility | R Value | Each | |
| 2 7/8" | 2 1/2 | Rigid | 8.7 | 00000000 | 000000 |
Ultra-Insulating Low-Temperature Polyisocyanurate Foam Pipe Insulation
This very rigid insulation offers the lowest heat-flow rate of our pipe insulation and restricts absorption of water, air, and gas. It is typically used in process piping and chiller plants and performs best in applications below 50° F. To use outdoors, add metal jacketing.
Tubes have a kraft paper all-service jacket (ASJ) that resists mold and mildew by allowing moisture to evaporate. They have an adhesive strip closure.
- Temperature Range: -295° to 300° F
- Jacket Temperature Range: -40° to 240° F
- Heat Flow Rate: 0.17 Btu @ 75° F
- Density: 2 lbs./cu. ft.
- Color: Green
- Jacket Color: White
- Specifications Met: ASTM E84 25/50 for Flame and Smoke
2" Wall Thick. | ||||||
|---|---|---|---|---|---|---|
| ID | For Pipe Size | Lg., ft. | Flexibility | R Value | Each | |
| 2 7/8" | 2 1/2 | 3 | Rigid | 11.8 | 00000000 | 000000 |
- Temperature Range: -295° to 300° F
- Heat Flow Rate: 0.17 Btu @ 75° F
- Density: 2 lbs./cu. ft.
- Color: Green
- Specifications Met: ASTM E84 25/50 for Flame and Smoke
2" Wall Thick. | |||||
|---|---|---|---|---|---|
| ID | For Pipe Size | Flexibility | R Value | Each | |
| 2 7/8" | 2 1/2 | Rigid | 11.8 | 00000000 | 000000 |
- Temperature Range: -295° to 300° F
- Heat Flow Rate: 0.17 Btu @ 75° F
- Density: 2 lbs./cu. ft.
- Color: Green
- Specifications Met: ASTM E84 25/50 for Flame and Smoke
2" Wall Thick. | |||||
|---|---|---|---|---|---|
| ID | For Pipe Size | Flexibility | R Value | Each | |
| 2 7/8" | 2 1/2 | Rigid | 11.8 | 00000000 | 000000 |