About Turnbuckles and End Fittings
More
About Nuts, Materials, and Finishes
More
Clevis-to-Clevis Turnbuckles—Not for Lifting
Galvanized steel have a thick coating for mild corrosion resistance.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Forged bodies and components are stronger than cast bodies and components.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Turnbuckles | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Clevis Pin | Jam Nuts | ||||||||||
Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Each | Each | ||
10,000 | 20 1/4" | 6" | 26 1/4" | 7/8" | Cotter Pin | 1 3/16" | 1"-8 | 0000000 | 0000000 | 00000000 | 000000 |
10,000 | 25 1/2" | 12" | 37 1/2" | 7/8" | Cotter Pin | 1 3/16" | 1"-8 | 0000000 | 000000 | 00000000 | 00000 |
10,000 | 31 1/2" | 18" | 49 1/2" | 7/8" | Cotter Pin | 1 3/16" | 1"-8 | 0000000 | 000000 | 00000000 | 00000 |
Clevis-to-Clevis Turnbuckles—For Lifting
Made of galvanized steel, these turnbuckles have a thick coating for mild corrosion resistance.
Note: Capacities listed are for vertical lift only.
For technical drawings and 3-D models, click on a part number.
Turnbuckles | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Clevis Pin | Jam Nuts | |||||||||||
Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Thread Size | Specifications Met | Each | Each | ||
Forged Galvanized Steel Body with Forged Galvanized Steel Fittings | ||||||||||||
10,000 | 21 1/4" | 6" | 27 1/4" | 7/8" | Cotter Pin | 1 11/32" | 1"-8 | ASME B30.26, ASTM F1145 Type 1 | 0000000 | 0000000 | 00000000 | 000000 |
10,000 | 27 1/4" | 12" | 39 1/4" | 7/8" | Cotter Pin | 1 11/32" | 1"-8 | ASME B30.26, ASTM F1145 Type 1 | 0000000 | 000000 | 00000000 | 00000 |
10,000 | 33 1/4" | 18" | 51 1/4" | 7/8" | Cotter Pin | 1 11/32" | 1"-8 | ASME B30.26, ASTM F1145 Type 1 | 0000000 | 000000 | 00000000 | 00000 |
10,000 | 39 3/4" | 24" | 63 3/4" | 7/8" | Cotter Pin | 1 11/32" | 1"-8 | ASME B30.26, ASTM F1145 Type 1 | 0000000 | 000000 | 00000000 | 00000 |
Eye-to-Eye Turnbuckles—Not for Lifting
Galvanized steel and zinc-plated steel are mildly corrosion resistant.
Forged bodies and components are stronger than cast and wire drawn bodies and components.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Clevis-to-Eye Turnbuckles—Not for Lifting
Galvanized steel has a thick coating for mild corrosion resistance.
Forged bodies and components are stronger than cast bodies and components.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Turnbuckles | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Clevis Pin | Jam Nuts | ||||||||||||
Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Eye Shape | Eye ID | Thread Size | Each | Each | ||
10,000 | 19 1/4" | 6" | 25 1/4" | 7/8" | Cotter Pin | 1 3/16" | Round | 2" | 1"-8 | 0000000 | 0000000 | 00000000 | 000000 |
10,000 | 25 1/4" | 12" | 37 1/4" | 7/8" | Cotter Pin | 1 3/16" | Round | 2" | 1"-8 | 0000000 | 000000 | 00000000 | 00000 |
10,000 | 31 1/4" | 18" | 49 1/4" | 7/8" | Cotter Pin | 1 3/16" | Round | 2" | 1"-8 | 0000000 | 000000 | 00000000 | 00000 |
Clevis-to-Eye Turnbuckles—For Lifting
Made of galvanized steel, these turnbuckles have a thick coating for mild corrosion resistance.
Note: Capacities listed are for vertical lifting only.
For technical drawings and 3-D models, click on a part number.
Turnbuckles | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Clevis Pin | Jam Nuts | |||||||||||||
Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Dia. | Closure Type | Clevis Inside Wd. | Eye Shape | Eye ID | Thread Size | Specifications Met | Each | Each | ||
Forged Galvanized Steel Body with Galvanized Steel Fittings | ||||||||||||||
10,000 | 21 1/2" | 6" | 27 1/2" | 7/8" | Cotter Pin | 1 11/32" | Oval | 1 7/16" | 1"-8 | ASME B30.26; ASTM F1145 Type 1 | 0000000 | 0000000 | 00000000 | 000000 |
10,000 | 27 1/2" | 12" | 39 1/2" | 7/8" | Cotter Pin | 1 11/32" | Oval | 1 7/16" | 1"-8 | ASME B30.26; ASTM F1145 Type 1 | 0000000 | 000000 | 00000000 | 00000 |
10,000 | 33 1/2" | 18" | 51 1/2" | 7/8" | Cotter Pin | 1 11/32" | Oval | 1 7/16" | 1"-8 | ASME B30.26; ASTM F1145 Type 1 | 0000000 | 000000 | 00000000 | 00000 |
10,000 | 40 1/4" | 24" | 64 1/4" | 7/8" | Cotter Pin | 1 11/32" | Oval | 1 7/16" | 1"-8 | ASME B30.26; ASTM F1145 Type 1 | 0000000 | 000000 | 00000000 | 00000 |
Hook-to-Eye Turnbuckles—Not for Lifting
Galvanized steel and zinc-plated steel are mildly corrosion resistant.
Forged bodies and components are stronger than cast bodies and components.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Hook-to-Hook Turnbuckles—Not for Lifting
Zinc-plated steel and galvanized steel are mildly corrosion resistant.
Forged bodies and components are stronger than cast bodies and components.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Threaded Stud-to-Stud Turnbuckles—Not for Lifting
Galvanized steel has a thick coating for mild corrosion resistance.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Unthreaded Stub-to-Stub Turnbuckles—Not for Lifting
Weld these stubs to parts or use to push objects apart instead of pulling them together.
Galvanized steel has a thick coating for mild corrosion resistance.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Forged bodies and components are stronger than cast bodies and components.
Note: Capacities listed are for straight or in-line pull only.
For technical drawings and 3-D models, click on a part number.
Turnbuckle Bodies—Not for Lifting
Galvanized steel bodies have a thick coating for mild corrosion resistance.
316 stainless steel bodies are the most corrosion resistant and have excellent resistance to chemicals and salt water.
Forged bodies are stronger than cast bodies.
For technical drawings and 3-D models, click on a part number.
Thread Size | Max. Adjustment | Overall Lg. | Capacity, lbs. | Each | |
Forged Steel | |||||
---|---|---|---|---|---|
1"-8 | 6" | 9" | 10,000 | 00000000 | 000000 |
1"-8 | 12" | 15" | 10,000 | 00000000 | 00000 |
1"-8 | 18" | 21" | 10,000 | 0000000 | 00000 |
Forged Galvanized Steel | |||||
1"-8 | 6" | 9" | 9,800 | 00000000 | 00000 |
1"-8 | 12" | 15" | 9,800 | 00000000 | 00000 |
1"-8 | 18" | 21" | 9,800 | 00000000 | 00000 |
Forged 316 Stainless Steel | |||||
1"-8 | 6" | 9" | 8,000 | 0000000 | 000000 |
Jam Nuts for Turnbuckles
Tighten these nuts against the turnbuckle body to prevent the end fitting from unscrewing.
For technical drawings and 3-D models, click on a part number.
Thread Size | Wd. | Ht. | Includes | Each | |
Grade 2 Steel | |||||
---|---|---|---|---|---|
1"-8 | 1 15/32" | 35/64" | One Left-Hand Threaded Jam Nut, One Right-Hand Threaded Jam Nut | 00000000 | 000000 |
Thread Size | Wd. | Ht. | Includes | Each | |
Grade 2 Galvanized Steel | |||||
---|---|---|---|---|---|
1"-8 | 1 15/32" | 35/64" | One Left-Hand Threaded Jam Nut, One Right-Hand Threaded Jam Nut | 00000000 | 000000 |
Clevis End Fittings for Turnbuckles—Not for Lifting
Galvanized steel fittings have a thick coating for mild corrosion resistance.
316 stainless steel fittings are the most corrosion resistant and have excellent resistance to chemicals and salt water.
Forged fittings are stronger than cast and wire drawn fittings.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | ||||||||
---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Dia. | Closure Type | Clevis Inside Wd. | Overall Lg. | Capacity, lbs. | Each | |
Right-Hand Thread Direction | ||||||||
Forged Galvanized Steel | ||||||||
1"-8 | 5 1/2" | 7/8" | Cotter Pin | 1 3/16" | 10 1/4" | Not Rated | 00000000 | 000000 |
1"-8 | 8 1/8" | 7/8" | Cotter Pin | 1 3/16" | 13" | Not Rated | 00000000 | 00000 |
1"-8 | 11 1/4" | 7/8" | Cotter Pin | 1 3/16" | 16 1/8" | Not Rated | 00000000 | 00000 |
Forged 316 Stainless Steel | ||||||||
1"-8 | 4 13/16" | 7/8" | Bolt and Nut, Cotter Pin | 1 1/4" | 10 3/16" | 8,000 | 00000000 | 000000 |
Left-Hand Thread Direction | ||||||||
Forged Galvanized Steel | ||||||||
1"-8 | 5 1/2" | 7/8" | Cotter Pin | 1 3/16" | 10 1/4" | Not Rated | 00000000 | 00000 |
1"-8 | 8 1/8" | 7/8" | Cotter Pin | 1 3/16" | 13" | Not Rated | 00000000 | 00000 |
1"-8 | 11 1/4" | 7/8" | Cotter Pin | 1 3/16" | 16 1/8" | Not Rated | 00000000 | 00000 |
Forged 316 Stainless Steel | ||||||||
1"-8 | 4 13/16" | 7/8" | Bolt and Nut, Cotter Pin | 1 1/4" | 10 3/16" | 8,000 | 00000000 | 000000 |
Eye End Fittings for Turnbuckles—Not for Lifting
Galvanized steel fittings have a thick coating for mild corrosion resistance.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Forged fittings are stronger than wire drawn fittings.
Oval eyes provide more room to attach connectors.
For technical drawings and 3-D models, click on a part number.
Right-Hand Thread Direction | Left-Hand Thread Direction | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Eye ID | Eye Inside Lg. | Eye Shape | Overall Lg. | Capacity, lbs. | Each | Each | ||
Forged Galvanized Steel | ||||||||||
1"-8 | 5 5/8" | 2" | __ | Round | 9 7/8" | 10,000 | 00000000 | 000000 | 00000000 | 000000 |
1"-8 | 8 1/2" | 2" | __ | Round | 12 3/4" | 10,000 | 00000000 | 00000 | 00000000 | 00000 |
1"-8 | 11" | 2" | __ | Round | 16" | 10,000 | 00000000 | 00000 | 00000000 | 00000 |
Forged 316 Stainless Steel | ||||||||||
1"-8 | 5.06" | 1 3/8" | 3" | Oval | 11" | 8,000 | 00000000 | 000000 | 00000000 | 000000 |
Threaded Stud End Fittings for Turnbuckles—Not for Lifting
Galvanized steel fittings have a thick coating for mild corrosion resistance.
316 stainless steel fittings are the most corrosion resistant and have excellent resistance to chemicals and salt water.
For technical drawings and 3-D models, click on a part number.
Right-Hand Thread Direction | Left-Hand Thread Direction | ||||||
---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Overall Lg. | Capacity, lbs. | Each | Each | ||
Galvanized Steel | |||||||
1"-8 | 9 1/2" | 9 1/2" | 9,800 | 00000000 | 000000 | 00000000 | 000000 |
1"-8 | 12 1/2" | 12 1/2" | 9,800 | 00000000 | 00000 | 00000000 | 00000 |
1"-8 | 15 1/2" | 15 1/2" | 9,800 | 00000000 | 00000 | 00000000 | 00000 |
316 Stainless Steel | |||||||
1"-8 | 9" | 9" | 8,000 | 00000000 | 000000 | 00000000 | 000000 |
Steel | |||||||
1"-8 | 9 1/2" | 9 1/2" | 9,800 | 00000000 | 00000 | 00000000 | 00000 |
1"-8 | 12 1/2" | 12 1/2" | 9,800 | 00000000 | 00000 | 00000000 | 00000 |
1"-8 | 15 1/2" | 15 1/2" | 9,800 | 00000000 | 00000 | 00000000 | 00000 |
Hook End Fittings for Turnbuckles—Not for Lifting
Galvanized steel fittings have a thick coating for mild corrosion resistance.
Forged fittings are stronger than cast and wire drawn fittings.
For technical drawings and 3-D models, click on a part number.
Unthreaded Stub End Fittings for Turnbuckles—Not for Lifting
Weld these stubs to parts or use them to push objects apart instead of pulling them together.
316 stainless steel fittings are the most corrosion resistant and have excellent resistance to chemicals and salt water.
For technical drawings and 3-D models, click on a part number.
Right-Hand Thread Direction | Left-Hand Thread Direction | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Stub Dia. | Stub Lg. | Overall Lg. | Capacity, lbs. | Each | Each | ||
1035 Carbon Steel | |||||||||
1"-8 | 5" | 1" | 4 1/2" | 9 1/2" | 9,800 | 00000000 | 000000 | 00000000 | 000000 |
1"-8 | 8" | 1" | 4 1/2" | 12 1/2" | 9,800 | 00000000 | 00000 | 00000000 | 00000 |
1"-8 | 11" | 1" | 4 1/2" | 15 1/2" | 9,800 | 00000000 | 00000 | 00000000 | 00000 |
316 Stainless Steel | |||||||||
1"-8 | 5" | 15/16" | 4" | 9" | 8,000 | 00000000 | 000000 | 00000000 | 000000 |
Left-Hand to Right-Hand Female Hex Thread Adapters
Often called sleeve nuts, these thread adapters fasten parts with right-hand threads to parts with left-hand threads.
Zinc-plated steel adapters are strong and corrosion resistant.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Lg. | Thread Fit | Hex | Each | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
(A) | (B) | (A) | (B) | (A) | (B) | Size | Lg. | Hardness | 1-9 | 10-Up | |
Zinc-Plated Steel | |||||||||||
1"-8 | 1"-8 | 3 1/4" | 3 1/4" | Class 2B | Class 2B | 1 5/8" | 7" | Rockwell B65 | 000000000 | 000000 | 000000 |
Left-Hand Threaded Super-Corrosion-Resistant 316 Stainless Steel Hex Nuts
These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion. They have excellent chemical resistance and can be used in saltwater environments. Nuts may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Thread Size | Wd. | Ht. | Pkg. Qty. | Pkg. | |
316 Stainless Steel | |||||
---|---|---|---|---|---|
1"-8 | 1 1/2" | 55/64" | 1 | 000000000 | 000000 |