Turnbuckle Type Turnbuckle Type |
|---|
 |
| Clevis to Clevis |
 |
| Eye to Eye |
 |
| Threaded Stud to Stud |
 |
| Hook to Hook |
 |
| Hook to Eye |
 |
| Clevis to Eye |
 |
| Unthreaded Stub to Stub |
Thread Size Thread Size | Show |
|---|
Thread Size Thread Size | Hide |
|---|
Body Material Body Material |
|---|
|
End Fitting Material End Fitting Material |
|---|
|
End Fitting Type End Fitting Type |
|---|
 |
| Clevis |
 |
| Eye |
 |
| Hook |
 |
| Threaded Stud |
 |
| Unthreaded Stub |
Capacity Capacity |
|---|
|
Application Application |
|---|
|
End Fitting Finish End Fitting Finish |
|---|
|
Material Material |
|---|
|
Finish Finish |
|---|
|
End Fitting Fabrication End Fitting Fabrication |
|---|
|
|
Thread Direction Thread Direction |
|---|
|
Clevis Pin Closure Type Clevis Pin Closure Type |
|---|
|
About Turnbuckles and End Fittings
More
Clevis-to-Clevis Turnbuckles—Not for Lifting
Galvanized steel have a thick coating for mild corrosion resistance.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Forged bodies and components are stronger than cast bodies and components.
For technical drawings and 3-D models, click on a part number.
Eye-to-Eye Turnbuckles—Not for Lifting
Zinc-plated steel and galvanized steel are mildly corrosion resistant.
Aluminum is lightweight and has good corrosion resistance.
18-8 stainless steel has good corrosion resistance.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Forged bodies and components are stronger than cast and wire drawn bodies and components.
Oval eyes provide more room to attach connectors.
For technical drawings and 3-D models, click on a part number.
| Capacity | Retracted Lg. | Max. Adjustment | Extended Lg. | Eye Shape | Eye ID | Thread Size | Each | |
| Not Rated | 7 3/4" | 3" | 10 3/4" | Round | 5/8" | 3/8"-16 | 0000000 | 00000 |
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Eye Shape | Eye ID | Thread Size | Each | |
| 100 | 7 1/2" | 3" | 10 1/2" | Round | 11/16" | 3/8"-16 | 0000000 | 00000 |
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Eye Shape | Eye ID | Thread Size | Each | |
| 100 | 7 1/2" | 3" | 10 1/2" | Round | 11/16" | 3/8"-16 | 00000000 | 000000 |
Closed-Body Eye-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
Zinc-plated steel is mildly corrosion resistant.
Aluminum is lightweight and has good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Eye Shape | Eye ID | Thread Size | Each | |
Extruded Aluminum Body with Zinc-Plated Steel Fittings | ||||||||
|---|---|---|---|---|---|---|---|---|
| 200 | 7 1/2" | 3 1/8" | 10 5/8" | Round | 5/8" | 3/8"-16 | 000000000 | 00000 |
Eye-to-Eye Turnbuckles—For Lifting
Made of galvanized steel, these turnbuckles have a thick coating for mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Eye Shape | Eye ID | Eye Inside Lg. | Thread Size | Specifications Met | Each | |
Forged Galvanized Steel Body with Forged Galvanized Steel Fittings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1,200 | 12 1/4" | 6" | 18 1/4" | Oval | 1/2" | 1 1/8" | 3/8"-16 | ASME B30.26, ASTM F1145 Type 1 | 0000000 | 000000 |
Threaded Stud-to-Stud Turnbuckles—Not for Lifting
Galvanized steel has a thick coating for mild corrosion resistance.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
For technical drawings and 3-D models, click on a part number.
Hook-to-Hook Turnbuckles—Not for Lifting
Zinc-plated steel and galvanized steel are mildly corrosion resistant.
Aluminum is lightweight and has good corrosion resistance.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Forged bodies and components are stronger than cast bodies and components.
For technical drawings and 3-D models, click on a part number.
| Capacity | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Thread Size | Each | |
| Not Rated | 7 3/4" | 3" | 10 3/4" | 5/8" | 3/8"-16 | 0000000 | 00000 |
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Thread Size | Each | |
| 100 | 7 1/2" | 3" | 10 1/2" | 9/16" | 3/8"-16 | 00000000 | 00000 |
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Thread Size | Each | |
| 100 | 7 1/2" | 3" | 10 1/2" | 9/16" | 3/8"-16 | 00000000 | 000000 |
Closed-Body Hook-to-Hook Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
Zinc-plated steel is mildly corrosion resistant.
Aluminum is lightweight and has good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Thread Size | Each | |
Extruded Aluminum Body with Zinc-Plated Steel Fittings | |||||||
|---|---|---|---|---|---|---|---|
| 200 | 7 1/2" | 3 1/8" | 10 5/8" | 5/8" | 3/8"-16 | 000000000 | 00000 |
Hook-to-Eye Turnbuckles—Not for Lifting
Zinc-plated steel and galvanized steel are mildly corrosion resistant.
Aluminum is lightweight and has good corrosion resistance.
18-8 stainless steel has good corrosion resistance.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Forged bodies and components are stronger than cast bodies and components.
Oval eyes provide more room to attach connectors.
For technical drawings and 3-D models, click on a part number.
| Capacity | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Eye Shape | Eye ID | Thread Size | Each | |
| Not Rated | 7 3/4" | 3" | 10 3/4" | 5/8" | Round | 5/8" | 3/8"-16 | 0000000 | 00000 |
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Eye Shape | Eye ID | Thread Size | Each | |
| 100 | 7 1/2" | 3" | 10 1/2" | 9/16" | Round | 11/16" | 3/8"-16 | 00000000 | 00000 |
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Eye Shape | Eye ID | Thread Size | Each | |
| 100 | 7 1/2" | 3" | 10 1/2" | 9/16" | Round | 11/16" | 3/8"-16 | 00000000 | 000000 |
Closed-Body Hook-to-Eye Turnbuckles—Not for Lifting
The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.
Zinc-plated steel is mildly corrosion resistant.
Aluminum is lightweight and has good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Retracted Lg. | Max. Adjustment | Extended Lg. | Hook Opening Wd. | Eye Shape | Eye ID | Thread Size | Each | |
Extruded Aluminum Body with Zinc-Plated Steel Fittings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 200 | 7 1/2" | 3 1/8" | 10 5/8" | 5/8" | Round | 5/8" | 3/8"-16 | 000000000 | 00000 |
Clevis-to-Eye Turnbuckles—Not for Lifting
Galvanized steel has a thick coating for mild corrosion resistance.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Forged bodies and components are stronger than cast bodies and components.
Oval eyes provide more room to attach connectors.
For technical drawings and 3-D models, click on a part number.
Unthreaded Stub-to-Stub Turnbuckles—Not for Lifting
Weld these stubs to parts or use to push objects apart instead of pulling them together.
Galvanized steel has a thick coating for mild corrosion resistance.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Forged bodies and components are stronger than cast bodies and components.
For technical drawings and 3-D models, click on a part number.
Jam Nuts for Turnbuckles
Tighten these nuts against the turnbuckle body to prevent the end fitting from unscrewing.
| Thread Size | Wd. | Ht. | Includes | Each | |
Grade 2 Steel | |||||
|---|---|---|---|---|---|
| 3/8"-16 | 9/16" | 7/32" | One Left-Hand Threaded Jam Nut, One Right-Hand Threaded Jam Nut | 00000000 | 00000 |
| Thread Size | Wd. | Ht. | Includes | Each | |
Grade 2 Galvanized Steel | |||||
|---|---|---|---|---|---|
| 3/8"-16 | 9/16" | 7/32" | One Left-Hand Threaded Jam Nut, One Right-Hand Threaded Jam Nut | 00000000 | 00000 |
Turnbuckle Bodies—Not for Lifting
Galvanized steel bodies have a thick coating for mild corrosion resistance.
316 stainless steel bodies are the most corrosion resistant and have excellent resistance to chemicals and salt water.
Forged bodies are stronger than cast bodies.
For technical drawings and 3-D models, click on a part number.
Clevis End Fittings for Turnbuckles—Not for Lifting
Galvanized steel fittings have a thick coating for mild corrosion resistance.
316 stainless steel fittings are the most corrosion resistant and have excellent resistance to chemicals and salt water.
Forged fittings are stronger than cast and wire drawn fittings.
For technical drawings and 3-D models, click on a part number.
Clevis Pin | ||||||||
|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Lg. | Dia. | Closure Type | Clevis Inside Wd. | Overall Lg. | Capacity, lbs. | Each | |
Right-Hand Thread Direction | ||||||||
Forged Galvanized Steel | ||||||||
| 3/8"-16 | 3 11/16" | 5/16" | Cotter Pin | 1/2" | 5 3/4" | Not Rated | 00000000 | 00000 |
Forged 316 Stainless Steel | ||||||||
| 3/8"-16 | 3 15/16" | 5/16" | Cotter Pin | 9/16" | 5 7/8" | 1,200 | 00000000 | 00000 |
Cast 316 Stainless Steel | ||||||||
| 3/8"-16 | 3 7/8" | 3/8" | Cotter Ring | 9/16" | 5 3/8" | 1,200 | 000000000 | 00000 |
Left-Hand Thread Direction | ||||||||
Forged Galvanized Steel | ||||||||
| 3/8"-16 | 3 11/16" | 5/16" | Cotter Pin | 1/2" | 5 3/4" | Not Rated | 00000000 | 0000 |
Forged 316 Stainless Steel | ||||||||
| 3/8"-16 | 3 15/16" | 5/16" | Cotter Pin | 9/16" | 5 7/8" | 1,200 | 00000000 | 00000 |
Cast 316 Stainless Steel | ||||||||
| 3/8"-16 | 3 7/8" | 3/8" | Cotter Ring | 9/16" | 5 3/8" | 1,200 | 000000000 | 00000 |
Eye End Fittings for Turnbuckles—Not for Lifting
Galvanized steel fittings have a thick coating for mild corrosion resistance.
316 stainless steel is the most corrosion resistant and has excellent resistance to chemicals and salt water.
Forged fittings are stronger than wire drawn fittings.
Oval eyes provide more room to attach connectors.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Lg. | Eye ID | Eye Inside Lg. | Eye Shape | Overall Lg. | Capacity, lbs. | Each | |
Right-Hand Thread Direction | ||||||||
|---|---|---|---|---|---|---|---|---|
Forged Galvanized Steel | ||||||||
| 3/8"-16 | 3 7/8" | 3/4" | __ | Round | 5 15/16" | 1,200 | 00000000 | 00000 |
Forged 316 Stainless Steel | ||||||||
| 3/8"-16 | 4.02" | 1/2" | 1 1/16" | Oval | 6 1/8" | 1,200 | 00000000 | 00000 |
Welded 316 Stainless Steel | ||||||||
| 3/8"-16 | 3 3/4" | 5/8" | __ | Round | 5 1/2" | 1,200 | 000000000 | 0000 |
Left-Hand Thread Direction | ||||||||
Forged Galvanized Steel | ||||||||
| 3/8"-16 | 3 7/8" | 3/4" | __ | Round | 5 15/16" | 1,200 | 00000000 | 0000 |
Forged 316 Stainless Steel | ||||||||
| 3/8"-16 | 4.02" | 1/2" | 1 1/16" | Oval | 6 1/8" | 1,200 | 00000000 | 00000 |
Welded 316 Stainless Steel | ||||||||
| 3/8"-16 | 3 3/4" | 5/8" | __ | Round | 5 1/2" | 1,200 | 000000000 | 0000 |
Threaded Stud End Fittings for
Turnbuckles—Not for Lifting
Galvanized steel fittings have a thick coating for mild corrosion resistance.
316 stainless steel fittings are the most corrosion resistant and have excellent resistance to chemicals and salt water.
For technical drawings and 3-D models, click on a part number.
Hook End Fittings for Turnbuckles—Not for Lifting
Galvanized steel fittings have a thick coating for mild corrosion resistance.
316 stainless steel fittings are the most corrosion resistant and have excellent resistance to chemicals and salt water.
Forged fittings are stronger than cast and wire drawn fittings.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Lg. | Hook Opening Wd. | Overall Lg. | Capacity, lbs. | Each | |
Right-Hand Thread Direction | ||||||
|---|---|---|---|---|---|---|
Forged Galvanized Steel | ||||||
| 3/8"-16 | 3 7/8" | 5/8" | 6 1/8" | 1,000 | 00000000 | 00000 |
Forged 316 Stainless Steel | ||||||
| 3/8"-16 | 3.71" | 1/2" | 5 7/16" | 700 | 00000000 | 0000 |
Left-Hand Thread Direction | ||||||
Forged Galvanized Steel | ||||||
| 3/8"-16 | 3 7/8" | 5/8" | 6 1/8" | 1,000 | 00000000 | 0000 |
Forged 316 Stainless Steel | ||||||
| 3/8"-16 | 3.71" | 1/2" | 5 7/16" | 700 | 00000000 | 0000 |
Unthreaded Stub End Fittings
for Turnbuckles—Not for Lifting
Weld these stubs to parts or use them to push objects apart instead of pulling them together.
316 stainless steel fittings are the most corrosion resistant and have excellent resistance to chemicals and salt water.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Lg. | Stub Dia. | Stub Lg. | Overall Lg. | Capacity, lbs. | Each | |
Right-Hand Thread Direction | |||||||
|---|---|---|---|---|---|---|---|
1035 Carbon Steel | |||||||
| 3/8"-16 | 4" | 3/8" | 4" | 8" | 1,200 | 00000000 | 00000 |
316 Stainless Steel | |||||||
| 3/8"-16 | 4" | 5/16" | 2 1/2" | 6 1/2" | 1,200 | 00000000 | 00000 |
Left-Hand Thread Direction | |||||||
1035 Carbon Steel | |||||||
| 3/8"-16 | 4" | 3/8" | 4" | 8" | 1,200 | 00000000 | 0000 |
316 Stainless Steel | |||||||
| 3/8"-16 | 4" | 5/16" | 2 1/2" | 6 1/2" | 1,200 | 00000000 | 00000 |
Left-Hand to Right-Hand Female Hex Thread Adapters
Often called sleeve nuts, thread adapters fasten parts with right-hand threads to parts with left-hand threads.
18-8 stainless steel has good corrosion resistance.
Zinc-plated steel is strong and corrosion resistant.
For technical drawings and 3-D models, click on a part number.