Two-Part Acrylic Adhesives

	Container Type Container Type


Cartridge	Syringe

Bottle	Brush-Top Bottle

Tube	Aerosol Can

	For Use On For Use On

	For Joining For Joining

Plastic to Composites

	Manufacturer Manufacturer

	Manufacturer Model Number Manufacturer Model Number

324
325
326
330
331
332
334
392
403/19
406/19
506/19
3035
7387
14300
30500
31500
DP805
DP810
DP810NS
DP820
DP8005
DP8010
DP8407NS
DP8805NS
DP8810NS
H3000
H3151
H4500
H8000
H8100
IT194

	Type Type

Adhesive

Activator

	Shear Strength Shear Strength

Less than 2,500 lbs./sq. in.

2,500 to 2,999 lbs./sq. in.

3,000 to 3,249 lbs./sq. in.

3,250 to 3,499 lbs./sq. in.

3,500 lbs./sq. in. or greater

	Color Color

	Light Yellow		Off-White
	Gray		Amber
	Beige		Green
	Blue		Light Green
	Black		Brown
	Yellow

	Cure Type Cure Type

Room Temperature

Activator

	Consistency Consistency

	Begins to Harden Begins to Harden

	Mixing Required Mixing Required

Yes

	Maximum Temperature Maximum Temperature

	Peel Strength Peel Strength

	Viscosity Viscosity

	Container Size Container Size

	Reaches Full Strength Reaches Full Strength

24 hrs.

48 hrs.

72 hrs.

	Manufacturer Model Name Manufacturer Model Name

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Mix Ratio Mix Ratio

	Approximate Coverage Approximate Coverage

9 ft. @ 1/8" dia. bead

10 ft. @ 1/8" dia. bead

11 ft. @ 1/8" dia. bead

12 ft. @ 1/8" dia. bead

14 ft. @ 1/8" dia. bead

17 ft. @ 1/8" dia. bead

18 ft. @ 1/8" dia. bead

19 ft. @ 1/8" dia. bead

20 ft. @ 1/8" dia. bead

100 ft. @ 1/8" dia. bead

115 ft. @ 1/8" dia. bead

390 ft. @ 1/8" dia. bead

10 ft. @ 1/4" dia. bead

83 ft. @ 1/4" dia. bead

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

60 Products

About Structural Adhesives

Toughened Acrylic Structural Adhesives

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

MA310 bonds dissimilar materials.

3M Scotch-Weld Adhesives

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
DP805	1.64	Cartridge	3 min.	24 hrs.	2,800	35	1:1	Paste (112,500 cP)	-40° to 180°	Off-White	Metal, Plastic, Rubber, Composites, Wood	0000000	000000
DP810	1.64	Cartridge	10 min.	24 hrs.	3,400	30	1:1	Thick Liquid (20,000 cP)	-40° to 180°	Beige	Metal, Plastic, Rubber, Composites, Wood	00000000	00000
DP810NS	1.64	Cartridge	10 min.	24 hrs.	3,400	23	1:1	Paste (95,000 cP)	-40° to 180°	Beige	Metal, Plastic, Rubber, Composites, Wood	00000000	00000
DP820	1.64	Cartridge	15 min.	48 hrs.	2,500	22	1:1	Thick Liquid (57,500 cP)	-40° to 180°	Off-White	Metal, Plastic, Rubber, Composites, Wood	0000000	00000

Devcon Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Plastic Welder	14300	1	Syringe	4 min.	24 hrs.	3,000	35	1:1	Thick Liquid (55,000 cP)	-65° to 250°	Light Yellow	Metal, Plastic, Composites, Masonry, Wood	00000000	000000

Plexus Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
MA300	30500	1.58	Cartridge	4 min.	24 hrs.	3,000	35	1:1	Thick Liquid (55,000 cP)	-65° to 250°	Light Yellow	Metal, Plastic, Composites, Masonry, Wood	00000000	000000
MA310	31500	1.58	Cartridge	15 min.	24 hrs.	3,000	15	1:1	Thick Liquid (55,000 cP)	-65° to 250°	Light Yellow	Metal, Metal to Plastic, Plastic, Plastic to Composites, Plastic to Masonry, Composites, Masonry, Wood	00000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Replacement Plunger for 1.64 fl. oz. 3M Cartridges	0000000	000000
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip)	0000000	0000
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip)	0000000	0000
Mixer Nozzle for 1.58 fl. oz. Plexus Cartridges	00000000	0000
Dispensing Gun for 1.58 fl. oz. Plexus Cartridges	00000000	00000
Dispensing Gun for 1.64 fl. oz. 3M Cartridges	0000000	000000
Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges	0000000	000000

High-Strength Acrylic Structural Adhesives

With excellent shear strength, these acrylics form stronger bonds than our standard acrylic structural adhesives. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

DP8407NS and DP8410NS are nonsagging, so they won't drip from vertical or overhead surfaces. They contain 0.01" glass beads to prevent adhesive from squeezing out during clamping and give a consistent bond thickness.

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
3M Scotch-Weld Adhesives
DP8407NS	1.52	Cartridge	7 min.	24 hrs.	4,500	50	10:1	Thick Liquid (20,000 cP)	-40° to 400°	Gray	Metal, Plastic, Rubber, Composites	0000000	000000
Loctite® Adhesives
H3000	1.69	Cartridge	5 min.	24 hrs.	4,150	45	1:1	Thick Liquid (45,000 cP)	-65° to 250°	Off-White	Metal, Plastic, Rubber	0000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.52 fl. oz. 3M Cartridges	0000000	00000
Mixer Nozzle for 1.69 fl. oz. Loctite® Cartridges	00000000	0000
Replacement Plunger for 1.52 fl. oz. 3M Cartridges	0000000	00000
Dispensing Gun for 1.52 fl. oz. 3M Cartridges	0000000	000000
Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	00000000	00000

Acrylic Structural Adhesives

Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.

The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

H4500 works especially well on metals.

H8000 and H8100 maintain their impact resistance at cold temperatures.

IT194 is nonsagging, so it won't drip from vertical or overhead surfaces.

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
H4500	1.69	Cartridge	15 min.	72 hrs.	3,100	58	10:1	Thick Liquid (14,380 cP)	-40° to 210°	Gray	Metal, Plastic	0000000	000000
H8000	1.69	Cartridge	30 min.	24 hrs.	2,800	45	10:1	Paste (190,000 cP)	-65° to 250°	Green	Metal, Plastic, Composites	0000000	00000
H8100	1.69	Cartridge	15 min.	72 hrs.	2,880	45	10:1	Paste (190,000 cP)	-65° to 250°	Green	Metal, Plastic	0000000	00000
Plexus Adhesives
IT194	1.18	Cartridge	4 min.	24 hrs.	2,000	30	10:1	Gel (96,140 cP)	-40° to 180°	Gray	Metal, Plastic, Rubber, Composites, Masonry, Wood	00000000	00000
Adhesives with Mixer Nozzle
__	1.69	Cartridge	5 min.	24 hrs.	3,200	7	1:1	Thick Liquid (64,000 cP)	-40° to 250°	Light Green	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry	000000	00000
__	13.5	Cartridge	5 min.	24 hrs.	3,200	7	1:1	Thick Liquid (64,000 cP)	-40° to 250°	Light Green	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry	000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Loctite® Cartridges	00000000	00000
Mixer Nozzle for 1.42 fl. oz. and 1.69 fl. oz. Cartridges	00000000	0000
Mixer Nozzle for 13.5 fl. oz. Cartridges	0000000	0000
Plunger for 1.69-oz. Cartridges (10:1 Mix Ratio)	00000000	0000
Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	00000000	00000
Dispensing Gun for 1.69 fl. oz. Cartridges (1:1 Mix Ratio)	00000000	00000
Dispensing Gun for 13.5 fl. oz. Cartridges	0000000	000000

Acrylic Structural Adhesives for Hard-to-Bond Materials

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.

The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

DP8005 contains 0.008" glass beads to prevent adhesive from squeezing out during clamping and give a consistent bond thickness.

DP8010 is moisture and corrosion resistant.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
3M Scotch-Weld Adhesives
DP8005	1.52	Cartridge	3 min.	24 hrs.	2,275	9	10:1	Thick Liquid (24,550 cP)	-65° to 200°	Black	Plastic	00000000	000000
DP8005	1.52	Cartridge	3 min.	24 hrs.	2,500	17	10:1	Thick Liquid (25,460 cP)	-65° to 200°	Off-White	Plastic	00000000	00000
DP8010	1.52	Cartridge	10 min.	24 hrs.	2,700	Not Rated	10:1	Thick Liquid (20,000 cP)	-40° to 200°	Blue	Plastic	0000000	00000
Loctite® Adhesives
3035	1.69	Cartridge	2 min.	24 hrs.	1,655	45	1:1	Thick Liquid (30,000 cP)	-65° to 250°	Yellow	Plastic, Rubber	0000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.52 fl. oz. 3M Cartridges	0000000	00000
Mixer Nozzle for 1.69 fl. oz. Loctite® Cartridges	00000000	0000
Replacement Plunger for 1.52 fl. oz. 3M Cartridges (10:1 Mix Ratio)	0000000	00000
Dispensing Gun for 1.52 fl. oz. 3M Cartridges	0000000	000000
Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	00000000	00000

No-Mix Acrylic Structural Adhesives

No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.

Dispense adhesives in cartridges with a standard caulk gun.

324 and 330 bond dissimilar materials.

325 forms flexible bonds that withstand rapid changes in temperature.

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining	Requires Loctite® Activator No.		Each
Loctite® Adhesives with Activator
330	0.85	Syringe	5 min.	24 hrs.	3,300	Not Rated	Thick Liquid (67,500 cP)	-65° to 250°	Amber	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Glass, Wood, Wood to Glass	__	0000000	000000
330	8.5	Tube	5 min.	24 hrs.	3,300	Not Rated	Thick Liquid (67,500 cP)	-65° to 250°	Amber	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Glass, Wood, Wood to Glass	__	0000000	000000
Loctite® Adhesives
324	1.69	Bottle	5 min.	24 hrs.	2,700	13	Thick Liquid (17,000 cP)	-65° to 350°	Amber	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Glass	7075, 7387	0000000	00000
325	1.69	Bottle	5 min.	24 hrs.	1,600	Not Rated	Thick Liquid (20,000 cP)	-65° to 300°	Brown	Metal, Plastic, Rubber, Glass	7075, 7387	00000000	00000
326	1.69	Bottle	60 sec.	24 hrs.	2,200	Not Rated	Thick Liquid (17,000 cP)	-65° to 250°	Brown	Metal, Plastic, Rubber, Glass	7649	0000000	00000
330	8.5	Tube	5 min.	24 hrs.	3,300	Not Rated	Thick Liquid (67,500 cP)	-65° to 250°	Amber	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Glass, Wood, Wood to Glass	7387	0000000	000000
330	10	Cartridge	5 min.	24 hrs.	3,300	Not Rated	Thick Liquid (67,500 cP)	-65° to 250°	Amber	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Glass, Wood, Wood to Glass	7387	00000000	000000
330	33	Bottle	5 min.	24 hrs.	3,300	Not Rated	Thick Liquid (67,500 cP)	-65° to 250°	Amber	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Glass, Wood, Wood to Glass	7387	00000000	000000
331	0.9	Syringe	20 sec.	24 hrs.	3,100	19	Thick Liquid (20,000 cP)	-40° to 350°	Light Yellow	Metal, Plastic, Rubber, Glass	7387	0000000	00000
332	33	Bottle	3 min.	24 hrs.	3,000	20	Paste (100,000 cP)	-65° to 400°	Light Yellow	Metal, Plastic, Rubber, Glass	7387	0000000	000000
334	0.8	Syringe	90 sec.	24 hrs.	2,800	25	Thick Liquid (80,000 cP)	-65° to 350°	Light Yellow	Metal, Plastic, Rubber, Glass	7380, 7387	00000000	00000
392	1.69	Tube	60 sec.	24 hrs.	2,500	Not Rated	Thick Liquid (6,500 cP)	-65° to 250°	Amber	Metal, Plastic, Rubber, Glass	7380, 7387	00000000	00000
392	33	Bottle	60 sec.	24 hrs.	2,500	Not Rated	Thick Liquid (6,500 cP)	-65° to 250°	Amber	Metal, Plastic, Rubber, Glass	7380, 7387	000000	000000

Activators and Primers

		Each
Loctite® 7387 (1.75 fl. oz. Brush-Top Bottle)	0000000	000000
Loctite® 7387 (4.5 oz. Aerosol Can)	0000000	00000
Loctite® 7649 (.88 oz. Aerosol Can)	0000000	00000
Loctite® 7649 (1.75 fl. oz. Bottle)	0000000	00000
Loctite® 7649 (4.5 oz. Aerosol Can)	0000000	00000
Loctite® 7649 (1-gal. Can)	0000000	000000

Chemical-Resistant Acrylic Structural Adhesives

Solvents, oils, acids, and other chemicals won't degrade the bond of these adhesives. They also resist moisture and UV rays. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.

The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs/sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	Environment	For Joining		Each
Lord Adhesives with Mixer Nozzle
403/19	1.42	Cartridge	2 min.	24 hrs.	3,000	37	4:1	Paste (220,000 cP)	-40° to 300°	Beige	Corrosive, Salt Spray	Metal, Plastic, Rubber, Composites	00000000	000000
406/19	1.42	Cartridge	6 min.	24 hrs.	2,800	26	4:1	Paste (220,000 cP)	-40° to 300°	Beige	Corrosive, Salt Spray	Metal, Plastic, Rubber, Composites	00000000	00000
506/19	1.69	Cartridge	4 min.	24 hrs.	3,500	10	2:1	Paste (130,000 cP)	-40° to 300°	Off-White	Corrosive	Metal, Plastic, Rubber, Composites	00000000	00000

Replacement Mixer Nozzle	Each	00000
Dispensing Gun	Each	00000
Plunger for 1.42 fl. oz. Cartridges (4:1 Mix Ratio)	Each	0000

Acrylic Structural Adhesives with Spacing Beads

To keep these adhesives from squeezing out during clamping and give a consistent bond thickness, they're mixed with small glass beads.

The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

DP8805NS and DP8810NS are toughened to form resilient, impact-resistant bonds.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
3M Scotch-Weld Adhesives
DP8805NS	1.52	Cartridge	5 min.	24 hrs.	3,900	25	10:1	Thick Liquid (45,000 cP)	-20° to 280°	Green	Metal, Plastic, Rubber, Composites	0000000	000000
DP8810NS	1.52	Cartridge	10 min.	24 hrs.	3,600	35	10:1	Thick Liquid (45,000 cP)	-20° to 280°	Green	Metal, Plastic, Rubber, Composites	0000000	00000
Loctite® Adhesives
H3151	1.69	Cartridge	40 min.	24 hrs.	3,780	40	1:1	Thick Liquid (70,000 cP)	-65° to 250°	Light Yellow	Metal, Plastic	0000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.52 fl. oz. 3M Cartridges	0000000	00000
Mixer Nozzle for 1.69 fl. oz. Loctite® Cartridges	00000000	0000
Replacement Plunger for 1.52 fl. oz. 3M Cartridges	0000000	00000
Dispensing Gun for 1.52 fl. oz. 3M Cartridges	0000000	000000
Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	00000000	00000

Acrylic Adhesive Activators

Activators are required for no-mix acrylic structural adhesives to create adhesion.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

		Container
Mfr. Model No.	For Loctite® Model No.	Size, fl. oz.	Net Weight, oz.	Type	Consistency	Viscosity, cP	Color		Each
Loctite® Activators
7387	324, 325, 330, 331, 332, 334, 352, 392	__	4 1/2	Aerosol Can	Thin Liquid	1	Amber	0000000	000000
7387	324, 325, 330, 331, 332, 334, 352, 392	1 3/4	__	Brush-Top Bottle	Thin Liquid	1	Amber	0000000	00000