Store up to 500 readings on these thermometers and determine temperature within ±0.75° F accuracy.

The thermocouple probe measures temperatures up to 500° F, and the thermometer housing meets IPX7 for protection from temporary submersion.

For use in food-processing applications, this thermometer meets NSF/ANSI standards and includes a thermocouple probe with a pointed tip to pierce dense meats and frozen foods.

Remotely check temperature on the go. These thermometers have a magnetic-back display for temporary mounting and a thermocouple probe with a 5-ft. coiled cable.

Thick wire with ceramic insulation stands up to extreme temperatures in forging, die casting, and heat treating.

Made of stainless steel, these probes measure the temperature of liquids and gases without corroding.

To prevent wear and corrosion, an armored stainless steel cable protects the wiring that connects these probes to your temperature-monitoring device. The probes themselves are also made of stainless steel, so you don't have to worry about corrosion when you're measuring the temperature of liquids and gases.

Send temperature readings to two separate devices—these probes, also known as duplex thermocouples, have two thermocouples inside.

Safe to use while measuring temperatures near flammable gases or combustible dust, these probes have an explosion-proof head that’s FM approved.

To prevent damage from vibration, impact, and shock, these probes come with a thermowell. It acts as a shield, allowing the probe to measure the temperature of liquids and gases without touching them.

Designed to measure temperature in dairy and food-processing applications, these probes are built to maintain sanitary standards.

Measure temperatures around your facility by sticking these probes onto magnetic surfaces.

Often used where it’d be difficult to mount a standard probe, these probes stick onto magnetic surfaces to take temperature readings.

Wrap these probes around pipe, hose, or other tubular shapes to measure surface temperature.

Keep an eye on the surface temperature of your equipment—these probes thread directly into a tapped hole for continuous monitoring.

Pierce pliable plastics, rubber, and other soft solids to check the internal temperature. Also known as penetration probes, these thermocouple probes have a stainless-steel housing with a narrow tip.

With a clip on the end, these probes are quick to install and easy to remove. They're often used on vents, circuit boards, and other irregular surfaces.