Search Results
Shape Shape |
|---|
 |  |
| U Channel | 90° Angle |
Outside Width Outside Width |
|---|
Material Material |
|---|
|
Outside Height Outside Height |
|---|
|
|
|
Performance Properties Performance Properties |
|---|
|
Mount Type Mount Type |
|---|
 | |
| Push On | Push-In Stem |
Inside Height Inside Height |
|---|
|
|
|
Hardness Hardness |
|---|
|
For Use With For Use With |
|---|
Specifications Met Specifications Met |
|---|
|
About Durometer Hardness Scales
More
About Plastic
More
Slippery UHMW Polyethylene U-Channels
- Color: White
- Temperature Range: -20° F to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: ASTM D4020, ASTM D4976, ASTM D6712, Made of FDA Listed Material
Fabricate frames and parts for use in areas where scuffs, scrapes, and strikes are a factor. These UHMW U-channels have a slippery surface and excellent abrasion, wear, and impact resistance.
Outside | Inside | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Lengths, ft. | Per Ft. | |
1/8" Wall Thick. | ||||||||
| 3/4" | -0.080" to 0.080" | 1 1/4" | -0.080" to 0.080" | 5/8" | 1" | 0000000 | 00000 | |
1/4" Wall Thick. | ||||||||
| 3/4" | -0.080" to 0.080" | 1" | -0.080" to 0.080" | 3/8" | 1/2" | 0000000 | 0000 | |
| 7/8" | -0.080" to 0.080" | 1 1/2" | -0.080" to 0.080" | 1/2" | 1" | 0000000 | 0000 | |
| 1" | -0.080" to 0.080" | 2" | -0.080" to 0.080" | 5/8" | 1 1/2" | 0000000 | 0000 | |
| 1" | -0.080" to 0.080" | 2 1/2" | -0.080" to 0.080" | 5/8" | 2" | 0000000 | 0000 | |
| 1" | -0.080" to 0.080" | 3" | -0.080" to 0.080" | 5/8" | 2 1/2" | 0000000 | 0000 | |
3/8" Wall Thick. | ||||||||
| 1" | -0.080" to 0.080" | 3" | -0.080" to 0.080" | 5/8" | 2 1/4" | 0000000 | 0000 | |
| 1 1/4" | -0.080" to 0.080" | 4 1/4" | -0.080" to 0.080" | 7/8" | 3 1/2" | 0000000 | 0000 | |
Slippery UHMW Polyethylene 90° Angles
- Color: White
- Temperature Range: -20° F to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: ASTM D4020, Made of FDA Listed Material
Often used to fabricate frames and protect corners from impact, these UHMW 90° angles have a slippery surface that stands up to scuffs, scrapes, and strikes.
Outside | Inside | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Lengths, ft. | Per Ft. | |
1/4" Wall Thick. (-0.060" to 0.060") | ||||||||
| 5/8" | -0.060" to 0.060" | 1 1/2" | -0.060" to 0.060" | 3/8" | 1 1/4" | 0000000 | 00000 | |
| 1 1/2" | -0.060" to 0.060" | 1 1/2" | -0.060" to 0.060" | 1 1/4" | 1 1/4" | 0000000 | 0000 | |
| 2" | -0.060" to 0.060" | 2" | -0.060" to 0.060" | 1 3/4" | 1 3/4" | 0000000 | 0000 | |
1/2" Wall Thick. (-0.060" to 0.060") | ||||||||
| 3" | -0.060" to 0.060" | 3" | -0.060" to 0.060" | 2 1/2" | 2 1/2" | 0000000 | 00000 | |
| 3 1/2" | -0.060" to 0.060" | 3 1/2" | -0.060" to 0.060" | 3" | 3" | 0000000 | 00000 | |
Plastic Trim
1
2
3
4
7
16
Flexible trim can be bent along a gradual curve. Trim with a hard or medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.
Push-on trim fits onto an edge and it grips on three sides for a tight hold. Trim with an interior adhesive strip offers additional gripping strength.
Push-in stem trim has a barbed stem to fit snugly into grooves or openings that are slightly smaller than the stem thickness.
For technical drawings and 3-D models, click on a part number.
Push On
1
2
3
4
7
Inside | Outside | Per Ft. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Opening Wd. (E) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Available Lengths, ft. | 1-99 | 100-Up | |
Polyethylene Plastic | |||||||||||||||
| 1 | 1/8" | 7/16" | 1/4" | 1/2" | __ | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 00000 | 00000 | |
| 1 | 9/64" | 19/64" | 1/4" | 11/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 000 | 000 | |
| 1 | 1/4" | 29/64" | 23/64" | 1/2" | __ | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 000 | 000 | |
| 2 | 3/64" | 5/32" | 1/8" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 1/16" | 5/32" | 1/8" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 1/16" | 5/32" | 11/64" | 13/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 5/64" | 5/32" | 11/64" | 13/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 3/32" | 11/64" | 15/64" | 7/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 1/8" | 11/64" | 15/64" | 7/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 3/16" | 7/32" | 9/32" | 17/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 1/4" | 15/64" | 3/8" | 9/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 3/64" | 5/32" | 1/8" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 1/16" | 5/32" | 1/8" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 1/16" | 5/32" | 11/64" | 13/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 5/64" | 5/32" | 11/64" | 13/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 3/32" | 11/64" | 13/64" | 7/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 1/8" | 11/64" | 13/64" | 7/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 3/16" | 7/32" | 9/32" | 17/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 1/4" | 15/64" | 3/8" | 9/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 4 | 1/64"-7/64" | 19/32" | 15/64" | 21/32" | __ | Flexible | Hard | -10° to 170° | No | Yes | Off-White | 00000000 | 000 | 000 | |
| Each | |||||||||||||||
| 4 | 1/32"-3/16" | 1 7/8" | 11/32" | 1 15/16" | __ | Flexible | Hard | -10° to 170° | No | Yes | Off-White | 4 | 00000000 | 000 | 00 |
Per Ft. | |||||||||||||||
| 1-99 | 100-Up | ||||||||||||||
| 4 | 1/8"-11/64" | 15/16" | 21/64" | 1" | __ | Flexible | Hard | -10° to 170° | No | Yes | Off-White | 00000000 | 0000 | 0000 | |
| 7 | __ | 5/64" | 3/16" | 5/32" | 1/16"-5/64" | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 000 | 000 | |
| 7 | __ | 5/64" | 7/32" | 5/32" | 5/64"-7/64" | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 000 | 000 | |
Polyethylene Plastic—with Interior Adhesive Strip | |||||||||||||||
| 2 | 7/64" | 9/64" | 11/64" | 11/64" | __ | Flexible | __ | 30° to 120° | No | Yes | Black | 0000000 | 000 | 000 | |
| 2 | 5/32" | 9/64" | 17/64" | 3/16" | __ | Flexible | __ | 30° to 120° | No | Yes | Black | 0000000 | 000 | 000 | |
| 3 | 7/64" | 9/64" | 11/64" | 11/64" | __ | Flexible | __ | 30° to 120° | No | Yes | Black | 0000000 | 000 | 000 | |
| 3 | 7/64" | 9/64" | 1/4" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Black | 0000000 | 000 | 000 | |
Push-In Stem
16
Outside | Stem | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Wd. (C) | Ht. (D) | Lg. | Thick. | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Choose a Color | Available Lengths, ft. | Per Ft. | |
Polyethylene Plastic | |||||||||||||
| 16 | 1/2" | 5/64" | 1/4" | 3/32" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 00000 | ||
| 16 | 3/4" | 1/16" | 9/32" | 3/32" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 000 | ||
| 16 | 13/16" | 1/16" | 5/16" | 7/64" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 000 | ||
| 16 | 7/8" | 3/64" | 13/32" | 7/64" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 000 | ||
| 16 | 1 1/4" | 5/64" | 11/32" | 1/8" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 0000 | ||
Conductive Plastic Trim
With a surface resistivity of 105 ohms, this trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of plastic, it's also chemical resistant. Use it to protect the edges of electronics equipment and circuit boards from impact. Push this trim onto an edge and it grips on three sides for a tight hold. All are flexible so it can bend along a gradual curve. This trim has a hard rating to withstand high levels of impact. It's also nonmarking.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | Per Ft. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Lg., ft. | 1-99 | 100-Up | |
Polyethylene Plastic | |||||||||||||
| 1/32" | 3/8" | 3/16" | 1/2" | Flexible | Hard | 30° to 120° | No | Yes | Black | 4 | 00000000 | 00000 | 00000 |
| 1/16" | 7/32" | 7/32" | 9/32" | Flexible | Hard | 30° to 120° | No | Yes | Black | 4 | 00000000 | 0000 | 0000 |
| 1/16" | 3/8" | 7/32" | 1/2" | Flexible | Hard | 30° to 120° | No | Yes | Black | 4 | 00000000 | 0000 | 0000 |