Material Material |
|---|
|
Performance Properties Performance Properties |
|---|
|
Hardness Rating Hardness Rating |
|---|
|
Specifications Met Specifications Met |
|---|
|
For Use With For Use With |
|---|
About Durometer Hardness Scales
More
About Plastic
More
Plastic Trim
Flexible trim can be bent along a gradual curve. Trim with a hard or medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.
Push-on trim fits onto an edge and it grips on three sides for a tight hold. Trim with an interior adhesive strip offers additional gripping strength.
Push-in stem trim has a barbed stem to fit snugly into grooves or openings that are slightly smaller than the stem thickness.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | Per Ft. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Opening Wd. (E) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Available Lengths, ft. | 1-99 | 100-Up | |
Polyethylene Plastic | |||||||||||||||
| 1 | 1/8" | 7/16" | 1/4" | 1/2" | __ | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 00000 | 00000 | |
| 1 | 9/64" | 19/64" | 1/4" | 11/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 000 | 000 | |
| 1 | 1/4" | 29/64" | 23/64" | 1/2" | __ | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 000 | 000 | |
| 2 | 3/64" | 5/32" | 1/8" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 1/16" | 5/32" | 1/8" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 1/16" | 5/32" | 11/64" | 13/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 5/64" | 5/32" | 11/64" | 13/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 3/32" | 11/64" | 15/64" | 7/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 1/8" | 11/64" | 15/64" | 7/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 3/16" | 7/32" | 9/32" | 17/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 2 | 1/4" | 15/64" | 3/8" | 9/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 3/64" | 5/32" | 1/8" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 1/16" | 5/32" | 1/8" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 1/16" | 5/32" | 11/64" | 13/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 5/64" | 5/32" | 11/64" | 13/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 3/32" | 11/64" | 13/64" | 7/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 1/8" | 11/64" | 13/64" | 7/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 3/16" | 7/32" | 9/32" | 17/64" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 3 | 1/4" | 15/64" | 3/8" | 9/32" | __ | Flexible | Hard | 30° to 120° | No | Yes | Off-White | 0000000 | 000 | 000 | |
| 4 | 1/64"-7/64" | 19/32" | 15/64" | 21/32" | __ | Flexible | Hard | -10° to 170° | No | Yes | Off-White | 00000000 | 000 | 000 | |
| Each | |||||||||||||||
| 4 | 1/32"-3/16" | 1 7/8" | 11/32" | 1 15/16" | __ | Flexible | Hard | -10° to 170° | No | Yes | Off-White | 4 | 00000000 | 000 | 00 |
Per Ft. | |||||||||||||||
| 1-99 | 100-Up | ||||||||||||||
| 4 | 1/8"-11/64" | 15/16" | 21/64" | 1" | __ | Flexible | Hard | -10° to 170° | No | Yes | Off-White | 00000000 | 0000 | 0000 | |
| 7 | __ | 5/64" | 3/16" | 5/32" | 1/16"-5/64" | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 000 | 000 | |
| 7 | __ | 5/64" | 7/32" | 5/32" | 5/64"-7/64" | Flexible | Hard | 30° to 120° | No | Yes | Black | 00000000 | 000 | 000 | |
Polyethylene Plastic—with Interior Adhesive Strip | |||||||||||||||
| 2 | 7/64" | 9/64" | 11/64" | 11/64" | __ | Flexible | __ | 30° to 120° | No | Yes | Black | 0000000 | 000 | 000 | |
| 2 | 5/32" | 9/64" | 17/64" | 3/16" | __ | Flexible | __ | 30° to 120° | No | Yes | Black | 0000000 | 000 | 000 | |
| 3 | 7/64" | 9/64" | 11/64" | 11/64" | __ | Flexible | __ | 30° to 120° | No | Yes | Black | 0000000 | 000 | 000 | |
| 3 | 7/64" | 9/64" | 1/4" | 3/16" | __ | Flexible | Hard | 30° to 120° | No | Yes | Black | 0000000 | 000 | 000 | |
Outside | Stem | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Wd. (C) | Ht. (D) | Lg. | Thick. | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Choose a Color | Available Lengths, ft. | Per Ft. | |
Polyethylene Plastic | |||||||||||||
| 16 | 1/2" | 5/64" | 1/4" | 3/32" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 00000 | ||
| 16 | 3/4" | 1/16" | 9/32" | 3/32" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 000 | ||
| 16 | 13/16" | 1/16" | 5/16" | 7/64" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 000 | ||
| 16 | 7/8" | 3/64" | 13/32" | 7/64" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 000 | ||
| 16 | 1 1/4" | 5/64" | 11/32" | 1/8" | Flexible | Hard | -10° to 150° | No | Yes | 0000000 | 0000 | ||
Food Industry Plastic Trim
This trim is suitable for use in food preparation and processing environments. It's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact in food processing applications. This trim has a hard rating to withstand high levels of impact. It's also nonmarking.
UHMW trim has better wear resistance than nylon and vinyl trim.
Rigid trim does not bend and is for use on straights. Screw-in trim requires drilling mounting holes and securing it with fasteners.
For technical drawings and 3-D models, click on a part number.
Outside | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (C) | Ht. (D) | Thick. | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Specifications Met | Available Lengths, ft. | Per Ft. | |
Short Lengths | |||||||||||
UHMW Plastic—Hard | |||||||||||
| 1 1/2" | 1 1/2" | 1/4" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 | |
| 2" | 2" | 1/4" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 0000 | |
| 3" | 3" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 | |
| Each | |||||||||||
8-ft. Length | |||||||||||
UHMW Plastic—Hard | |||||||||||
| 1 1/2" | 1 1/2" | 1/4" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 8 | 00000000 | 00000 |
| 2" | 2" | 1/4" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 8 | 00000000 | 00000 |
| 3" | 3" | 1/2" | Rigid | -20° to 180° | No | Yes | White | FDA Compliant 21 CFR 177.1520 | 8 | 00000000 | 00000 |
Conductive Plastic Trim
With a surface resistivity of 105 ohms, this trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of plastic, it's also chemical resistant. Use it to protect the edges of electronics equipment and circuit boards from impact. Push this trim onto an edge and it grips on three sides for a tight hold. All are flexible so it can bend along a gradual curve. This trim has a hard rating to withstand high levels of impact. It's also nonmarking.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | Per Ft. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Lg., ft. | 1-99 | 100-Up | |
Polyethylene Plastic | |||||||||||||
| 1/32" | 3/8" | 3/16" | 1/2" | Flexible | Hard | 30° to 120° | No | Yes | Black | 4 | 00000000 | 00000 | 00000 |
| 1/16" | 7/32" | 7/32" | 9/32" | Flexible | Hard | 30° to 120° | No | Yes | Black | 4 | 00000000 | 0000 | 0000 |
| 1/16" | 3/8" | 7/32" | 1/2" | Flexible | Hard | 30° to 120° | No | Yes | Black | 4 | 00000000 | 0000 | 0000 |
| 5/64" | 29/64" | 3/16" | 1/2" | Flexible | Hard | 30° to 120° | No | Yes | Black | 4 | 00000000 | 0000 | 0000 |
Slippery UHMW Polyethylene U-Channels
- Color: White
- Temperature Range: -20° F to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: ASTM D4020, ASTM D4976, ASTM D6712, FDA Compliant 21 CFR 177.1520
Fabricate frames and parts for use in areas where scuffs, scrapes, and strikes are a factor. These UHMW U-channels have a slippery surface and excellent abrasion, wear, and impact resistance.
Outside | Inside | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Lengths, ft. | Per Ft. | |
1/8" Wall Thick. | ||||||||
| 3/4" | -0.080" to 0.080" | 1 1/4" | -0.080" to 0.080" | 5/8" | 1" | 0000000 | 00000 | |
1/4" Wall Thick. | ||||||||
| 3/4" | -0.080" to 0.080" | 1" | -0.080" to 0.080" | 3/8" | 1/2" | 0000000 | 0000 | |
| 7/8" | -0.080" to 0.080" | 1 1/2" | -0.080" to 0.080" | 1/2" | 1" | 0000000 | 0000 | |
| 1" | -0.080" to 0.080" | 2" | -0.080" to 0.080" | 5/8" | 1 1/2" | 0000000 | 0000 | |
| 1" | -0.080" to 0.080" | 2 1/2" | -0.080" to 0.080" | 5/8" | 2" | 0000000 | 0000 | |
| 1" | -0.080" to 0.080" | 3" | -0.080" to 0.080" | 5/8" | 2 1/2" | 0000000 | 0000 | |
3/8" Wall Thick. | ||||||||
| 1" | -0.080" to 0.080" | 3" | -0.080" to 0.080" | 5/8" | 2 1/4" | 0000000 | 0000 | |
| 1 1/4" | -0.080" to 0.080" | 4 1/4" | -0.080" to 0.080" | 7/8" | 3 1/2" | 0000000 | 0000 | |
Slippery UHMW Polyethylene 90° Angles
- Color: White
- Temperature Range: -20° F to 180° F
- Tensile Strength: 4,350-5,800 psi (Poor)
- Impact Strength: 16.8 ft.-lbs./in. (Excellent)
- Hardness: Durometer 65D-67D (Medium)
- For Use Outdoors: No
- Specifications Met: ASTM D4020, FDA Compliant 21 CFR 177.1520
Often used to fabricate frames and protect corners from impact, these UHMW 90° angles have a slippery surface that stands up to scuffs, scrapes, and strikes.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | |||||||
|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Lengths, ft. | Per Ft. | |
1/8" Wall Thick. (-0.060" to 0.060") | ||||||||
| 1" | -0.060" to 0.060" | 1" | -0.060" to 0.060" | 7/8" | 7/8" | 0000000 | 00000 | |
| 1 1/2" | -0.060" to 0.060" | 1 1/2" | -0.060" to 0.060" | 1 3/8" | 1 3/8" | 0000000 | 0000 | |
| 2" | -0.060" to 0.060" | 2" | -0.060" to 0.060" | 1 7/8" | 1 7/8" | 0000000 | 0000 | |
1/4" Wall Thick. (-0.060" to 0.060") | ||||||||
| 5/8" | -0.060" to 0.060" | 1 1/2" | -0.060" to 0.060" | 3/8" | 1 1/4" | 0000000 | 0000 | |
| 1 1/2" | -0.060" to 0.060" | 1 1/2" | -0.060" to 0.060" | 1 1/4" | 1 1/4" | 0000000 | 0000 | |
| 2" | -0.060" to 0.060" | 2" | -0.060" to 0.060" | 1 3/4" | 1 3/4" | 0000000 | 0000 | |
1/2" Wall Thick. (-0.060" to 0.060") | ||||||||
| 3" | -0.060" to 0.060" | 3" | -0.060" to 0.060" | 2 1/2" | 2 1/2" | 0000000 | 00000 | |
| 3 1/2" | -0.060" to 0.060" | 3 1/2" | -0.060" to 0.060" | 3" | 3" | 0000000 | 00000 | |
Shoulder Screws
