Cold-Protection Hard-Hat Liners
Add a layer of warmth to your hard hat. Use the hook and loop attachments to fasten liners to the suspension of your hat and to secure under your chin.
Nylon is water and wind resistant.
Cotton provides better breathability than nylon.
Polyester fleece insulation is moisture wicking to prevent moisture buildup.
Acrylic fleece insulation is warmer than polyester.
Sherpa fleece insulation is warmer than other fleece linings. It is soft and thick, yet lightweight.
Liners with two layers of insulation have a layer of polypropylene fiber or polyurethane foam, as well as a layer of polyester fleece, for extra warmth.
Liners with warming pack slots give you a spot to insert hand warmer pads (not included) to keep your ears warm.
Fluorescent yellow liners are bright, so you stand out in all lighting conditions.
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Application | Material | Insulation Material | Closure Type | Features | Color | Weight, oz. | Hard Hat Size | 1-11 | 12-Up | |
Head Coverage | ||||||||||
| Cold Protection | Cotton Fabric | Acrylic Fleece Fabric | Hook and Loop | __ | Dark Blue | 2.6 | One Size | 0000000 | 00000 | 00000 |
| Cold Protection, Water Resistant | Nylon Fabric | Polyester Fleece Fabric | Hook and Loop | __ | Blue | 4.8 | One Size | 0000000 | 0000 | 0000 |
Head and Nape Coverage | ||||||||||
| Cold Protection | Cotton Fabric | Polyester Fleece Fabric and Polypropylene Fiber | Hook and Loop | Two Layers of Insulation | Dark Blue | 3.5 | One Size | 0000000 | 00000 | 00000 |
Head, Nape, and Neck Coverage | ||||||||||
| Cold Protection | Cotton Fabric | Polyester Sherpa Fleece Fabric | Hook and Loop | __ | Dark Blue | 2.4 | One Size | 0000000 | 00000 | 00000 |
| Cold Protection | Cotton Fabric | Polyester Fleece Fabric and Polypropylene Fiber | Hook and Loop | Two Layers of Insulation | Dark Blue | 4.8 | One Size | 0000000 | 00000 | 00000 |
| Cold Protection, Water Resistant, High Visibility | Polyester Fabric | Polyester Fleece Fabric | Hook and Loop | __ | Fluorescent Yellow | 2.8 | One Size | 00000000 | 00000 | 00000 |
Head, Nape, Neck, and Face Coverage | ||||||||||
| Cold Protection | Cotton Fabric | Acrylic/Polyester Sherpa Fleece Fabric Blend | Hook and Loop | Removable Face Cover | Dark Blue | 5.5 | One Size | 0000000 | 00000 | 00000 |
| Cold Protection, Water Resistant | Polyester Fabric | Polyester Fleece Fabric and Polyurethane Foam | Hook and Loop | Removable Face Cover, Two Layers of Insulation, Warming Pack Slots | Black | 7.2 | One Size | 00000000 | 00000 | 00000 |
Flame- and Arc-Flash-Protection Base Layers
Wear these fitted garments under clothing for an added layer of protection against intermittent exposure to flames and radiant heat. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1 or 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. All base layer materials are lightweight, breathable, and moisture wicking for added comfort.
They all comply with OSHA 29 CFR 1910.269 standards for flame and arc flash protection.
Cotton/acrylic base layers are stretchy for increased mobility and range of motion.
When measuring chest size, measure around the fullest part of your chest.
Available Men's Sizes | |
|---|---|
| Size | Chest Size |
| S | 34"/36" |
| M | 38"/40" |
| L | 42"/44" |
| XL | 46"/48" |
| 2XL | 50"/52" |
| 3XL | 54"/56" |
| Material | Arc Rating, cal/cm2  | Arc Rated PPE Category | Cuff Style | Specifications Met | Color | Choose a Size | Each | |
Short Sleeve | ||||||||
|---|---|---|---|---|---|---|---|---|
| Cotton/Acrylic Fabric Blend | 4 | 1 | Open | OSHA Compliant 29 CFR 1910.269, NFPA 70E, ASTM F1506 | Dark Blue | 0000000 | 0000000 | |
Long Sleeve | ||||||||
| Cotton/Acrylic Fabric Blend | 4 | 1 | Knit | OSHA Compliant 29 CFR 1910.269, NFPA 70E, ASTM F1506 | Dark Blue | 0000000 | 000000 | |
Available Women's Sizes | |
|---|---|
| Size | Chest Size |
| XS | 30"/32" |
| S | 34"/36" |
| M | 38"/40" |
| L | 42"/44" |
| XL | 46"/48" |
| 2XL | 50"/52" |
| 3XL | 54"/56" |
Available Men's Sizes | ||
|---|---|---|
| Size | Waist Size | Inseam Lg. |
| S | 27"-29" | 31" |
| M | 30"-33" | 32" |
| L | 32"-35" | 33" |
| XL | 36"-39" | 34" |
| 2XL | 40"-43" | 34" |
| 3XL | 42"-45" | 35" |
Flame- and Arc-Flash-Protection Face Masks
Protect your head from electrical arc flashes. These face masks won’t melt or drip when exposed to intermittent flames. They meet NFPA 70E standards for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Masks are soft, breathable, and washable.
Westex® UltraSoft® Rib fabric is a lightweight material that’s 88% flame-resistant cotton and 12% nylon knit.
| Material | Arc Rating, cal/cm2 | Arc Rated PPE Category | Color | Size | Each | |
| Westex ® UltraSoft ® Rib Fabric | 12 | 2 | Dark Blue | One Size | 00000000 | 000000 |
Flame- and Arc-Flash-Protection Hard-Hat Liners
Often used in utility work, metalworking, and welding, these hard-hat liners meet NFPA 70E to protect from flames and electrical arc flashes. They also shield your head and nape from the wind and cold. Secure the liner to your hard hat with the attached hook and loop tabs on each side. Choose a hard-hat liner that meets the arc rated personal protective equipment (PPE) category required by your workplace.
Liners with head, nape, and neck coverage have two layers of insulation inside the flame-resistant shell to protect against the cold: a mid-layer of aramid/modacrylic fabric and an inner layer of cotton/modacrylic fleece.
Liners with a removable nape cover allow you to cool off your nape by zipping off the back. With the nape cover removed, the liner protects the head like a cap.
Use liners with warming pad slots for extra warmth around the ears—slip hand warmer pads (sold separately) into the slots on each side.
Add masks to protect your mouth, chin, and nose. They have hook and loop tabs on each side that stick to the sides of the liner.
| Arc Rated PPE Category | Arc Rating, cal/cm2 | Material | Insulation Material | Closure Type | Features | Color | Weight, oz. | Hard Hat Size | Specifications Met | Each | |
Head and Nape Coverage | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 9.3 | Cotton Fabric | Cotton Fabric | Hook and Loop | __ | Blue | 2.8 | One Size | ASTM F1506, NFPA 70E | 0000000 | 000000 |
| 2 | 17 | Cotton/Modacrylic Blend Fabric | Cotton/Modacrylic Blend Fleece | Hook and Loop | Removable Nape Cover, Warming Pad Slots | Black | 3 | One Size | ASTM F1506, NFPA 70E | 0000000 | 00000 |
Head, Nape, and Neck Coverage | |||||||||||
| 3 | 27 | Cotton/Modacrylic Blend Fabric | Aramid/Modacrylic Blend Fabric, Cotton/Modacrylic Blend Fleece | Hook and Loop | Two Layers of Insulation, Warming Pad Slots | Black | 5.1 | One Size | ASTM F1506, NFPA 70E | 0000000 | 00000 |
| Arc Rated PPE Category | Arc Rating, cal/cm2 | Material | Insulation Material | Closure Type | Color | Weight, oz. | Specifications Met | Each | |
Face Coverage | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 2 | 20 | Cotton/Modacrylic Blend Fabric | Cotton/Modacrylic Blend Fleece | Hook and Loop | Black | 1.6 | ASTM F1506, NFPA 70E | 0000000 | 000000 |
Pkg. | |||||||
|---|---|---|---|---|---|---|---|
| Garment | Lg. | Wd. | Body Warmer Type | Number of Warmers Included | 1-5 | 6-Up | |
| Body Warmer | 3 1/2" | 2" | Pad | 1 Pair | 00000000 | 00000 | 00000 |
Glare-Reducing Underbrim Decals for Hard Hats
Stick these decals under the brim of your hard hat to limit glare, improve visibility, and ease eyestrain.
| Wd. | Color | Mount Type | Material | Length | Each | |
| 6 5/8" | Gray | Adhesive Back | Vinyl Plastic | 1 3/8" | 00000000 | 00000 |
Liners for Hair Control
Soak up sweat and keep hair from getting caught in equipment. These liners are also used to compress long hair so that hard hats fit more securely. All are machine washable.
Liners for head coverage have an elastic band for a snug fit. Soak them before wearing them, and they’ll cool you off as the water evaporates. With UPF 50 sun protection, they’ll also shield your skin from harmful UV rays.
Liners for head and nape coverage have tails that extend past the hard hat, covering your neck. A sweatband in the front helps keep moisture out of your eyes.
Magnetic Chip Catchers for Hard Hats
Capture metal shavings to prevent injury to your eyes. Used alongside safety glasses, these chip catchers provide extra protection from flying scraps during fabrication or metalworking. Cut them to fit your hard hat and stick them to the top or bottom of the brim.
| Lg. | Wd. | Shape | Mount Type | Material | Color | Each | |
| 7 3/4" | 1 3/4" | Cut-to-Size | Adhesive Back | Vinyl Plastic | Black | 00000000 | 00000 |