Unthreaded Standoffs | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Specifications Met Specifications Met

ASME

	Color Color

	Off-White
	Black
	White
	Green
	Beige
	Gray
	Clear
	Amber
	Blue
	Brown
	Coral
	Light Green
	Orange
	Pink
	Purple
	Red
	Yellow

	For Drill Bit Size For Drill Bit Size

	Installation Type Installation Type


Permanent	Removable

	Tensile Strength Tensile Strength

80,000 psi or greater

Not Rated

	Maximum Temperature Maximum Temperature

	Drill Bushing Type Drill Bushing Type

	Drill Bushing Style Drill Bushing Style

Smooth

Serrated

Knurled

	Individual/Set Individual/Set

17,895 Products

Unthreaded Spacers

Aluminum Unthreaded Spacers

Made of aluminum, these spacers are lightweight and mildly corrosion resistant.

18-8 Stainless Steel Unthreaded Spacers

18-8 stainless steel spacers have good corrosion resistance.

Zinc-Plated Steel Unthreaded Spacers

The zinc plating provides some corrosion resistance.

316 Stainless Steel Unthreaded Spacers

These spacers have excellent corrosion resistance and are passivated for enhanced protection.

Black-Anodized Aluminum Unthreaded Spacers

The anodized coating on these lightweight spacers provides increased abrasion resistance over uncoated aluminum.

Zinc-Plated Brass Unthreaded Spacers

Brass makes these spacers electrically conductive and the zinc-plated finish adds corrosion resistance.

Titanium Unthreaded Spacers

Choose titanium spacers for their high strength-to-weight ratio and excellent corrosion resistance.

Nylon Unthreaded Spacers

These spacers have excellent wear and abrasion resistance. Exposure to moisture may cause them to expand.

Polyethylene Unthreaded Spacers

Almost nonabsorbent, these unthreaded LDPE and HDPE spacers won't swell when exposed to water.

Polypropylene Unthreaded Spacers

Polypropylene spacers have a hard surface and resist many chemicals and solvents.

Acetal Unthreaded Spacers

Naturally slippery and wear resistant, acetal spacers also offer some resistance to moisture.

Polycarbonate Unthreaded Spacers

Made of FDA-listed material, these clear spacers can be used in food and beverage applications.

PTFE Unthreaded Spacers

PTFE spacers have a slippery surface and surpass most plastic spacers when it comes to chemical resistance and performance in extreme temperatures.

PEEK Unthreaded Spacers

Use PEEK spacers as an alternative to metal spacers in high-temperature, high-stress applications. They resist chemicals, wear, and moisture.

Vibration-Damping Unthreaded Spacers

Reduce vibration, shock, and noise with these spacers that compress between components.

Unthreaded Spacer Stock

Cut stock to the length you need.

Electrical-Insulating Unthreaded Spacers

Protect components from electrical charges.

Polished Unthreaded Spacers

With their mirror-like finish, these are the go-to spacers when appearance matters.

Made-to-Order Unthreaded Spacers

Choose the OD, ID, length, and material and we will accommodate your unique spacer needs.

Slotted Unthreaded Spacers

An economical alternative to standard unthreaded spacers.

Unthreaded Spacers for Angles

The 45° end fits against an angled surface to create a flat surface for connection.

Unthreaded Spacers for Keyed Shafts

Also known as arbor spacers, these are notched to space components on a keyed shaft.

Unthreaded Spacers for Tubes

Also known as saddle washers, the curved end fits against round objects such as tube and pipe.

Press-Fit Unthreaded Spacers

Also known as captive spacers, the splines on these bite into a panel for a permanent hold.

Snap-In Supports

Snap-In Supports with Male Threaded Connection

Thread the male connection into a tapped hole and snap the other end into a panel for a secure hold that can be released for repairs and upgrades.

Flat-Top Snap-In Supports

The flat top supports boards without drilling a hole while wings on the other end add tension for a secure hold in a hole.

Snap-In Supports with Female Connection

Secure the self-tapping female connection with a screw; the other end snaps snugly into a panel, yet can be released for repairs and upgrades.

Adhesive-Back Snap-In Supports

Stick these supports to surfaces where you don't want to drill a hole. The snap-in end can be released for repairs and upgrades.

Stackable Snap-In Supports

Designed for multi-level printed circuit board applications, these self-aligning, through-hole supports have a chamfered female end for stacking. The other end snaps and locks in place for a permanent connection.

Vibration-Damping Snap-In Supports

The ends of these removable supports snap in and compress between panels to reduce vibration of miniature cooling fans in compact electronics.

Dual Locking Snap-In Supports

Both ends snap and lock in place for a permanent connection.

Snap-In Supports

Wings add tension to strengthen the hold in a hole. The other end is releasable for repairs and upgrades.

Press-Fit Snap-Top Supports

With the end clinched in place, the prongs allow you to quickly snap a panel on and off these supports.

Washers

Metric Oversized Washers

Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses. Use them to cover oversized holes, hold heavy fastening loads, or as spacers and levelers.

Oversized Washers

Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.

General Purpose Washers

Metric General Purpose Washers

Use these metric washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.

USS Washers

USS washers generally have a larger ID and OD than SAE washers.

SAE Washers

SAE washers generally have a smaller ID and OD than USS washers.

Mil. Spec. Washers

Choose these washers for their adherence to strict military standards for material and construction.

ASME Washers for Soft Material

Also known as Type B washers, these distribute your fastener's load over a larger surface area than other washers to minimize damage to soft materials.

Washers with Material Certification

These washers come with a traceable lot number and a physical and chemical test report.

Washers for Blind Rivets

Also known as backup washers, these are for use with blind rivets for extra support when fastening into soft material.

Washers for Structural Applications

Designed for use with A325 structural screws, studs, and nuts, these washers are often used for construction and exterior building applications.

Tension-Indicating Washers for Structural Applications

When you’ve applied the correct tension, these washers release an orange dye as a visual indicator.

Metric Washers for Structural Applications

These thick washers are designed to support structural screws, studs, and nuts.

Plastic Washers

Metric Plastic Washers

Mil. Spec. Plastic Washers

Choose these washers for their adherence to strict military standards for material and construction.

Chemical-Resistant Plastic Washers

These washers surpass most other plastic washers when it comes to withstanding chemicals, oil, and grease.

Metric Chemical-Resistant Plastic Washers

These metric washers surpass most other plastic washers when it comes to withstanding chemicals, oil, and grease.

Mil. Spec. Chemical-Resistant Plastic Washers

Choose these washers for their adherence to strict military standards for material and construction.

High-Temperature Plastic Washers

These washers can withstand temperatures up to 450° or 500° F without degrading.

Water- and Steam-Resistant Plastic Washers

Low moisture absorption and good heat resistance make these washers suitable for wet and harsh environments.

Metric Electrical-Insulating Plastic Washers

Metric High-Temperature Plastic Washers

These metric washers can withstand temperatures up to 450° or 500° F without degrading.

Metric Water- and Steam-Resistant Plastic Washers

Low moisture absorption and good heat resistance make these metric washers suitable for wet and harsh environments.

Electrical-Insulating Plastic Washers

Extreme-Temperature Ceramic Washers

These washers hold up in blistering temperatures up to 3000° F.

High-Temperature Mica Washers

Mica washers withstand temperatures up to 1050° F.

Metric Extreme-Temperature Ceramic Washers

These metric washers hold up in blistering temperatures up to 3000° F.

Self-Retaining Washers

A specially shaped ID grips your screw shank tightly.

Electrical-Insulating Sleeve Washers

Also known as shoulder washers.

Electrical-Insulating Cup Sleeve Washers

These washers have a flat bottom and high walls to protect metal screw heads from electrical current.

Extra-Tall Electrical-Insulating
Rolled-Collar Sleeve Washers

The extra-tall sleeve extends into holes to provide more protection than other rolled-collar washers.

Electrical-Insulating Rolled-Collar Sleeve Washers

As you tighten your screw, the rolled collar compresses under the head to create an insulating barrier between a screw shank and a mating surface.

Countersunk Washers

Flat and oval head screws sit flush within these washers for a neat, finished appearance.

Plastic Countersunk Washers

Plastic washers are good electrical insulators.

Washers for Cross-Bracing

Connect cross-bracing rods or cables to structural beams.

Metric Countersunk Washers

Flat and oval head screws sit flush within these metric washers for a neat, finished appearance.

Finishing Countersunk Washers

Flanged Washers for Cross-Bracing

These washers have a flange to spread force across structural beams better than standard washers for cross-bracing rods and cables.

Metric Finishing Countersunk Washers

Angled-Edge Washers for Tie-Down Straps

Use the angled edges to hold and align tie-down straps.

Washers for Plaster

Repair sagging, cracked plaster with these washers. The holes allow plaster to flow through to form a secure bond between the washer and the wall.

Washers for Foam Insulation

These washers have prongs that pierce foam insulation so they stay in place.

Notched Washers for Wood

Also called No. 10 Western Timber and Victor washers, these have large ODs to prevent screws from sinking into wood. The notches allow you to temporarily secure them with nails to keep them from rotating during installation.

Cup Washers for Oversized Holes

Cover oversized holes and the ends of tubes and pipe with these cup-shaped washers.

Double-Clipped Washers

Clipped on both sides to fit where standard washers can't, these won't rotate when you position the flat edges against a flat surface.

Oversized Clipped Washers

With greater diameters and/or thicknesses than general purpose washers, these washers cover oversized holes or act as spacers and levelers. Clipped to fit where standard washers can’t, they won’t rotate when you position the flat edge against a flat surface.

Washers for Electrical Terminals

To keep electrical connections intact, these washers retain wires so they won't slip out from under your screw head.

Sleeve Washers for Soft Material

Reinforce holes in soft material to keep them from collapsing around screws.

Clipped Washers

Clipped to fit where standard washers can't, these won't rotate when you position the flat edge against a flat surface.

Plastic Washers for Rigid Insulation

Plastic washers resist moisture, chemicals, and friction and are good electrical insulators.

Square Washers

Square washers fit into slots and channels and have flat sides to keep them from rotating.

Steel Washers for Rigid Insulation

Steel washers provide a stronger bearing surface than plastic washers

Square Washers for Blind Rivets

Also known as backup washers, these are for use with blind rivets for extra support when fastening into soft material.

Curved Washers

Also known as saddle washers, these curved washers fit round surfaces such as tubes and pipe.

Angled-Edge Washers for
Toggle Clamp Holding Screws

Use on clamps with open arms to keep the holding screw in place.

Easy-Install Slotted Washers

A slot in the side allows you to install and remove these washers without completely disassembling your joint.

Split Lock Washers

As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.

Metric Split Lock Washers

Mil. Spec. Split Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Metric Split Lock Washers for Socket Head Screws

Split Lock Washers for Socket Head Screws

Oversized Split Lock Washers

Compared to standard split lock washers, these are thicker and have larger outside diameters.

Spring Lock Washers

Belleville Spring Lock Washers

Also known as conical washers, these have a slightly cupped shape that gives them spring-like flexibility to grip tighter than split and tooth lock washers.

Spring Lock Washers for Plastic Screws

Designed for use with plastic screws, these acetal washers are good electrical insulators. They are excellent for use under water and in rotating assemblies.

Belleville Spring Lock Washers for Socket Head Screws

These washers have smaller outside diameters than standard spring lock washers to fit neatly under socket head cap screws.

Metric Spring Lock Washers

The arched shape of these washers presses up against a bolt and down against a nut to prevent loosening from wear, vibration, or temperature changes.

Spring Lock Washers for Slotted Bearing Nuts

Designed for use with bearing nuts, these lock washers have a conical shape that presses like a spring against bearings, bushings, gears, and pulleys to hold them in place on your threaded shaft or spindle.

Wedge Lock Washers

Comparable to NORD-LOCK® and Sherex TEC Series washers, these two-piece washers provide more locking power than split, tooth, and spring lock washers. Wedges on the inside lock the two pieces together, and serrations on the exterior grip surfaces to resist loosening from high vibration and shifting.

Tooth Lock Washers

External-Tooth Lock Washers

Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip.

Mil. Spec. External-Tooth Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Countersunk Tight-Grip External-Tooth Lock Washers

To keep 90° countersunk screws from loosening in vibration applications, the teeth on these washers bite further into the screw head and joint than standard external-tooth lock washers for a more secure hold.

Tight-Grip External-Tooth Lock Washers

The teeth on these washers bite further into the screw head and joint than standard external-tooth washers to provide a stronger hold.

Internal-Tooth Lock Washers for Soft Material

Slightly domed with an oversized outside diameter, these washers distribute your fastener's load over a larger surface area than other internal-tooth lock washers to limit damage to soft material.

Internal-/External-Tooth Lock Washers

The combination of internal and external teeth boosts gripping power to maintain a tight hold and provide more vibration resistance than other tooth lock washers. Use with fasteners that have heads large enough to make contact with the external teeth, such as pan, button, and binding head screws.

Mil. Spec. Internal-Tooth Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Metric Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with metric fasteners that have small heads, such as fillister and cheese head screws.

Metric External-Tooth Lock Washers

Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.

Countersunk External-Tooth Lock Washers

The teeth on these washers firmly grip heads of 82° flat head countersunk screws.

Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with fasteners that have small heads, such as fillister and cheese head screws.

Leveling and Wave Washers

Triple-Wave Washers

With three points of surface contact, these washers provide more stability than single-wave washers.

Metric Single-Wave Washers

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.

Single-Wave Washers

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.

Metric Leveling Washers for I-Beams

Leveling Washers for I-Beams

Metric Leveling Washers

Leveling Washers

Square-Neck Bolt Lock Washers

Designed for use with square-neck bolts such as carriage bolts, these washers have teeth that dig into wood and other soft material to prevent rotation.

Metric Tab Lock Washers

Bend the tab of these metric lock washers against the flats of a hex nut or bolt head to prevent the fastener and washer from turning and loosening due to vibration, wear, or changes in temperature.

Sealing Washers

Pressure-Rated Metal-Bonded Sealing Washers

These washers are rated to withstand pressure up to 100 psi.

Metric High-Pressure-Rated
Metal-Bonded Sealing Washers

Able to withstand pressure greater than 7,000 psi, these one-piece bonded washers create the tightest seals.

High-Pressure-Rated Metal-Bonded Sealing Washers

Able to withstand pressure greater than 3,000 psi, these one-piece bonded washers create the tightest seals.

Pressure-Rated Metal-Bonded Sealing
Washers for Nuts and Washers

Also known as thread-sealing washers, use these under nuts and other washers.

Metal-Bonded Sealing Washers

Create a stronger seal than metal or rubber alone. These one-piece washers are metal for strength with a bonded rubber seal that creates a tight grip.

Weather-Resistant Rubber Sealing Washers

Sunlight, ozone, and water won’t affect these washers.

Metal Sealing Washers

Also known as crush washers, these compress when tightened to form a tighter, more durable seal than rubber washers. They are commonly used to seal fluids such as oil and fuel.

Chemical-Resistant Rubber Sealing Washers

These washers withstand harsh chemicals such as acetic acid and isopropyl alcohol.

Oil-Resistant Rubber Sealing Washers

These washers surpass other rubber washers when it comes to withstanding oil, grease, and fuel.

Abrasion-Resistant Rubber
and Plastic Sealing Washers

Made of durable material, these washers resist wear from rubbing and scraping surfaces.

Cushioning Washers

Abrasion-Resistant Cushioning Washers

These SBR rubber washers are reinforced with cloth fibers.

Abrasion-Resistant Leather Washers

These leather washers are nonmarring.

Chemical-Resistant Cushioning Washers

Made of Buna-N rubber, these washers offer excellent chemical, weather, and oil resistance. The raised grid pattern prevents sideways shifting.

Moisture-Resistant Cushioning Washers

These polyurethane washers withstand wet conditions as well as sunlight, ozone, and some chemicals.

Round Shims

Ring Shims

Precisely align, level, and adjust spacing on fasteners and shafts with these shims.

Ring Shim Sets

Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.

Shims for Shortening Screw Shoulders

Slide these shims under the screw head to shorten the shoulder length.

Wide-Rim Ring Shims

Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.

Shims for Lengthening Screw Shoulders

Spin these shims onto screw threads to extend the shoulder length.

Tight-Fit Ring Shims

For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other round shims.

Color-Coded Ring Shims

Precisely align, level, and adjust spacing on fasteners, shafts, and machinery with these shims, which are color-coded by thickness for easy identification.

Color-Coded Ring Shim Sets

Be prepared with ring shims in a variety of thicknesses. These shims are color-coded by thickness for easy identification.

Peel-Away Layered Ring Shims

These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.

Shims for Ball Bearing Housings

Also called tolerance rings, these rings are for use in stamped, molded, or worn housings to form a tight hold on the bearings.

Shim Sets for Keyed Shafts

Be prepared with shims in a variety of thicknesses. Also known as arbor spacers, these shims are notched to fit over keyed shafts.

Shims for Keyed Shafts

Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.

Shims for Ball Bearings

Adjust spacing between bearings and other components on shafts. These shims are sized to fit the outer rim of a bearing.

Shims for D-Profile Shafts

These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.

Shim Sets for D-Profile Shafts

Be prepared with shims in a variety of thicknesses. These shims are shaped to fit over D-profile shafts. Use them to precisely align, level, and adjust spacing.

Shims for Button Dies

Place these shims under sharpened dies to restore their original height and extend their life.

Disc Shims

Use these round shims as they are, or punch out the middle to create the ID you need.

Tapered Shims

Slotted Tapered Shims

The slot lets you install these rigid shims around screws.

Heavy Duty Tapered Shims

Ridges keep these aluminum shims from sliding apart when stacked. Designed for aligning shafts and axles, they support heavier loads than plastic tapered shims.

Tapered Shims

Ridges keep these shims from sliding apart when stacked.

Breakaway Tapered Shims

Easily snap off any excess to get the length you need.

Slotted Shims

Breakaway Slotted Shims

These shims are scored so you can easily shorten them to the length you need. Designed to fit around screws, they are commonly used in window, door, and cabinet installations.

Large-Adjustment Slotted Shims

Use these thick shims to align cabinets, doors, and windows, or for other rough leveling.

Slotted Shim Sets

Be prepared with slotted shims in a variety of thicknesses. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Color-Coded Slotted Shim Sets

Keep slotted shims in a variety of thicknesses on hand with these sets, which are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Color-Coded Slotted Shims

These shims are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Slotted Shims

The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Multi-Slotted Shims

Use a single shim on feet or positioning arms that are secured with multiple fasteners. The slots let you insert, remove, and adjust the shims without disassembling your machinery. Also known as finger shims.

Interlocking Color-Coded Horseshoe Shims

Clips on these shims hold them together when stacked, and they are color coded by thickness for easy identification. Designed to fit around screws, they are commonly used in window, door, and cabinet installations.

Shims for Hinges

Slide these shims behind your door’s hinge to align it in the jamb.

Horseshoe Shims

Align cabinets, doors, and windows with these shims. The horseshoe design fits around screws.

Color-Coded Horseshoe Shims

These shims are color-coded by thickness for easy identification. The horseshoe design fits around screws.

Made-to-Order Shims

Made-to-Order Peel-Away Layered Shims

Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Made-to-Order Shims

Send us a drawing, and we'll cut your custom shim.

Shim Tape

Level dies, plates, presses, and other machine tools—this shim tape conforms to curves and uneven surfaces.

Plastic Shim Plates

Breakaway Shim Plates

These thick shims are scored to make size adjustments easy—break off the excess shim for a custom fit around fasteners or corners. Use them to align cabinets, doors, and windows, or for other rough leveling.

Slip-Resistant Shim Plates

The textured surface of these thick shims keeps them from sliding apart when stacked. Use them to align cabinets, doors, and windows, or for other rough leveling.

Fastener Assortments

Washer Assortments

USS Washer Assortments

USS washers generally have a larger ID and OD than SAE washers.

SAE Washer Assortments

SAE washers generally have a smaller ID and OD than USS washers.

Oversized Washer Assortments

These washers have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.

Sleeve Washer Assortments

Also known as shoulder and insulator washers, these nonmetal washers block electrical current and prevent corrosion from mating different types of metal.

Split Lock Washer Assortments

As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.

Tooth Lock Washer Assortments

Teeth bite into the joint for a tighter grip than split lock washers.

Ring Shim Assortments

Use round shims to precisely align, level, and adjust spacing on shafts and machinery.

Shim Assortments for Button Dies

Place these shims under sharpened dies to restore their original height and extend the life of the dies.

Shim Assortments for Shortening Shoulder Screws

Slide onto a shoulder screw to shorten the length of the shoulder.

Shim Assortments for Lengthening Shoulder Screws

Spin these tight-fitting shims onto your screw's threads to lengthen the shoulder.

Drill Bushings

Press-Fit Drill Bushings

Finish-Your-Own Press-Fit Drill Bushings

Larger OD tolerances than standard press-fit bushings allow for finishing. Bushings should be machine ground.

Made-to-Order Press-Fit Drill Bushings

Choose the ID, OD, and length you need.

Metric Press-Fit Drill Bushings

Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part.

Made-to-Order Metric Press-Fit Drill Bushings

Choose the ID, OD, and length you need.

Wear-Resistant Press-Fit Drill Bushings

Made of durable tungsten carbide, these bushings outlast steel.

Corrosion-Resistant Press-Fit Drill Bushings

These bushings are made of stainless steel, which provides excellent corrosion resistance.

Made-to-Order Press-Fit Drill Bushings with Head

Choose the ID, OD, and length you need.

Metric Press-Fit Drill Bushings with Head

Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit.

Press-Fit Drill Bushings with Head

The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole.

Removable Drill Bushings

Replace worn bushings and quickly change IDs without needing to repeatedly use a lever press. Instead of pressing bushings in and out of your jig fixture, which can cause damage, these bushings slide in and out of sleeves.

Made-to-Order Removable Drill Bushings

Choose the ID, OD, and length you need.

Drill Bushings for Soft Metal and Wood

The serrations at the top of the bushing grip to prevent rotation and spin out.

Secure-Hold Drill Bushings for Plastic

The knurls resist force and provide better holding strength than serrations. Encase in plastic tooling.

Removable Drill Bushings for Thin Metal

Insert these bushings into a drilled hole and twist the lock ring to secure. Reusable and easy to replace, they are held in in place by a separate locking part.

Drill Bushings for Plastic

The serrations grip to prevent rotation and spin out. Press or encase into plastic tooling.

Dissolvable Shims

Use these paper shims to create a gap while welding, then spray them with water and they instantly melt away.

Unthreaded Spacers

Aluminum Unthreaded Spacers

18-8 Stainless Steel Unthreaded Spacers

Zinc-Plated Steel Unthreaded Spacers

316 Stainless Steel Unthreaded Spacers

Black-Anodized Aluminum Unthreaded Spacers

Zinc-Plated Brass Unthreaded Spacers

Titanium Unthreaded Spacers

Nylon Unthreaded Spacers

Polyethylene Unthreaded Spacers

Polypropylene Unthreaded Spacers

Acetal Unthreaded Spacers

Polycarbonate Unthreaded Spacers

PTFE Unthreaded Spacers

PEEK Unthreaded Spacers

Vibration-Damping Unthreaded Spacers

Unthreaded Spacer Stock

Electrical-Insulating Unthreaded Spacers

Polished Unthreaded Spacers

Made-to-Order Unthreaded Spacers

Slotted Unthreaded Spacers

Slotted Unthreaded Spacers

Unthreaded Spacers for Angles

Unthreaded Spacers for Angles

Unthreaded Spacers for Keyed Shafts

Unthreaded Spacers for Keyed Shafts

Unthreaded Spacers for Tubes

Unthreaded Spacers for Tubes

Press-Fit Unthreaded Spacers

Press-Fit Unthreaded Spacers

Snap-In Supports

Snap-In Supports with Male Threaded Connection

Flat-Top Snap-In Supports

Snap-In Supports with Female Connection

Adhesive-Back Snap-In Supports

Stackable Snap-In Supports

Vibration-Damping Snap-In Supports

Dual Locking Snap-In Supports

Snap-In Supports

Press-Fit Snap-Top Supports

Press-Fit Snap-Top Supports

Washers

Metric Oversized Washers

Oversized Washers

General Purpose Washers

Metric General Purpose Washers

USS Washers

SAE Washers

Mil. Spec. Washers

ASME Washers for Soft Material

Washers with Material Certification

Washers for Blind Rivets

Washers for Structural Applications

Tension-Indicating Washers for Structural Applications

Metric Washers for Structural Applications

Plastic Washers

Metric Plastic Washers

Mil. Spec. Plastic Washers

Chemical-Resistant Plastic Washers

Metric Chemical-Resistant Plastic Washers

Mil. Spec. Chemical-Resistant Plastic Washers

High-Temperature Plastic Washers

Water- and Steam-Resistant Plastic Washers

Metric Electrical-Insulating Plastic Washers

Metric High-Temperature Plastic Washers

Metric Water- and Steam-Resistant Plastic Washers

Electrical-Insulating Plastic Washers

Extreme-Temperature Ceramic Washers

High-Temperature Mica Washers

Metric Extreme-Temperature Ceramic Washers

Self-Retaining Washers

Electrical-Insulating Sleeve Washers

Electrical-Insulating Cup Sleeve Washers

Extra-Tall Electrical-InsulatingRolled-Collar Sleeve Washers

Electrical-Insulating Rolled-Collar Sleeve Washers

Countersunk Washers

Plastic Countersunk Washers

Washers for Cross-Bracing

Metric Countersunk Washers

Finishing Countersunk Washers

Extra-Tall Electrical-Insulating
Rolled-Collar Sleeve Washers

Angled-Edge Washers for
Toggle Clamp Holding Screws

Metric High-Pressure-Rated
Metal-Bonded Sealing Washers

Pressure-Rated Metal-Bonded Sealing
Washers for Nuts and Washers

Abrasion-Resistant Rubber
and Plastic Sealing Washers